• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2001년도 하계학술대회 논문집
• /
• pp.369-372
• /
• 2001

We studied the electro-optical (EO) performance in the vertical-alignment (VA) - l/4$\pi$ cell photoaligned with polarized UV exposure on a homeotropic photopolymer surfaces. Excellent voltage-transmittance curve in the VA - l/4$\pi$ cell photoaligned with polarized UV exposure for 3 min on the photopolymer containing cholesterol group of 8% can be achieved. The V-T characteristics in the VA-l/4$\pi$ cell photoaligned on the photopolymer surface can be improved by increasing cholesteryl group. For response time measurement, the transmittance characteristics of the VA-l/4$\pi$ cell photoaligned on the photopolymer surface was better than that of the VA-l/4$\pi$ cell rubbingaligned on a polyimide(Pl) surface.

• 한국전기전자재료학회논문지
• /
• 제14권8호
• /
• pp.670-674
• /
• 2001

The electro-optical (EO) performance in the vertical-alignment (VA) - 1/4$\pi$ cell photoaligned with polarized UV exposure on a homeotropic photopolymer surfaces was investigated. Excellent voltage-transmittance curve in the VA - 1/4$\pi$ cell photoaligned with polarized UV exposure for 3 min on the photopolymer containing cholesteryl group of 8% can be achieved. The V-T characteristics in the VA-1/4$\pi$ cell photoaligned on the photopolymer surface can be improved by increasing cholesteryl group. For response time measurement, the transmittance characteristics of the VA-1/4$\pi$ cell photopolymer surface was better than that of the VA-1/4$\pi$ cell rubbingaligned on a polyimide(PI) surface.

• E2M - 전기 전자와 첨단 소재
• /
• 제12권8호
• /
• pp.39-45
• /
• 1999

Comparative photoresponsive current-volt-age characteristics of n-channel PHEMT and MESFET on GaAs substrate. with (W/L)=200${\mu}{\textrm}{m}$/1${\mu}{\textrm}{m}$ of gates, are reported as a function of electro-optical stimulation (P\ulcorner, λ=830nm) for the first time as far as we know. Significantly different photoresponses are observed in MESFET and PHEMT, mainly due to different optoelectronic mechanisms in the formation and current conduction of channel carriers. Under high optical power, high photoresponsity with a strong non-linearity with P\ulcorner, predominantly due to a parallel conduction via a heavily doped Al\ulcornerGa\ulcornerAs donor layer, was observed in PHEMT while the optically induced drain current has been very small but monotonically increasing with optical stimulation in GaAs MESFET. We also investigated differences in optically stimulated gate leakage currents and photonic gate responses on gate voltage and drain voltage as a function of P\ulcorner. Based on the drain and gate responses to electro-optical stimulation. PHEMTs are expected to be a better candidate for high performance photonically responsive microwave device compared with MESFETs.

• 반도체디스플레이기술학회지
• /
• 제8권2호
• /
• pp.59-62
• /
• 2009

In order to check the validation of LC simulation, 0.7 inch LCOS panel in full-HD resolution was fabricated and used for the electro-optical measurement. Compared the measured data with the calculated data, the averaged difference was 1.72% under 0 ~ +6 V bias on pixel electrode. To improve the optical characteristics of full-HD LCOS panel, the planar structure and trench structures (0.1 um, 0.2 um and 0.3 um-in-depth) between adjacent pixels were investigated with LC simulation. The planar structure showed the higher reflectance and faster reflectance-voltage response time than the trench structure. The optical fill factor and contrast ratio of planar structure were also higher than those of trench structures. As compared 1 um-in-depth trench structure resembled to the real structure with the planar structure, the optical fill factor was improved by 1.15% and the contrast ratio was improved by 5.26%. In order to minimize the loss of luminance and contrast ratio, the planar structure need to be applied between adjacent pixels.

• 한국정보디스플레이학회:학술대회논문집
• /
• 한국정보디스플레이학회 2008년도 International Meeting on Information Display
• /
• pp.416-419
• /
• 2008

In this study, we report on the characteristics of Aldoped ZnO (AZO) co-sputtered indium tin oxide (ITO) films prepared by dual target direct current (DC) magnetron sputtering at room temperature for organic light emitting diodes (OLEDs). The electrical and optical properties of co-sputtered IAZTO electrode were critically dependent on the DC power of AZO. Furthermore, the characteristics of co-sputtered IAZTO electrode were influenced by rapid thermal annealing temperature.

• 대한전자공학회논문지SD
• /
• 제46권8호
• /
• pp.6-11
• /
• 2009

VA Mode LC를 사용하는 Full-HD급 LCOS 마이크로디스플레이에서 셀 상하 간격의 변화에 따른 전기광학적 특성의 변화에 관하여 3차원 LC code를 이용하여 연구하였다. 5가지의 다른 셀 상하 간격 (1.4 ${\mu}m$, 1.8 ${\mu}m$, 2.1 ${\mu}m$, 2.4 ${\mu}m$ 그리고 2.8 ${\mu}m$)의 변화에 따라 Reflectance-Voltage 특성, 반사광 및 반사율 분포, Optical Fill Factor 그리고 명암비를 비교하였다. Surface Anchoring 효과에 의해 상하 간격이 증가하면서 반사율은 증가하였으나 Optical Fill Factor와 명암비를 고려할 경우, 중간 수준의 간격인 2.1 ${\mu}m$ 의 특성이 가장 우수함을 확인할 수 있었다. 동일한 구조를 갖고 있는 0.7 인치 LCOS 패널을 제작하여 광학적 측정을 해 본 결과 시뮬레이션 결과와 통일함을 확인할 수 있었다.

• 한국정보디스플레이학회:학술대회논문집
• /
• 한국정보디스플레이학회 2000년도 제1회 학술대회 논문집
• /
• pp.25-26
• /
• 2000

This paper deals with the effect of the thickness of R,G and B phosphor on the electrical and optical characteristics in the reflective type AC PDP. By analyzing various parameters, such as addressing voltage, surface discharge voltage, luminance and luminous efficiency, the optimum value of the phosphor thickness is 50 ${\mu}m$ under the condition of 150 ${\mu}m$ barrier rib height.

• 대한전자공학회:학술대회논문집
• /
• 대한전자공학회 2008년도 하계종합학술대회
• /
• pp.513-514
• /
• 2008

The potential of non-rubbing technology for applying to display devices was demonstrated by irradiating a high density argon ion beam (IB) on a polyimide (PI) as a liquid crystal alignment layer. The superior electro-optical characteristics were obtained, compared to rubbed PI, Although the low pretilt angle was created on the IB irradiated PI.

• 한국전기전자재료학회논문지
• /
• 제23권4호
• /
• pp.327-332
• /
• 2010

We report on the effect of PET substrate preheating on the characteristics of the flexible and transparent indium tin oxide (ITO) electrode grown by a specially designed roll-to-roll sputtering system for touch panel applications. It was found that electrical and optical properties of the roll-to-roll sputter grown ITO film were critically dependent on the preheating of the PET substrate. In addition, the roll-to-roll sputter-grown ITO film after post annealing test at $140^{\circ}C$ for 90 min showed stable electrical and optical properties. The low sheet resistance and high optical transmittance of the ITO film grown on the preheated PET substrate demonstrate that the preheating process before ITO sputtering is one of the effective way to improve the characteristics of ITO/PET film. Furthermore, the superior flexibility of the ITO electrode grown on the preheated PET substrate indicates that the preheating treatment is a promising technique to obtain robust ITO/PET sample for touch panel applications.

• 조명전기설비학회논문지
• /
• 제25권11호
• /
• pp.33-38
• /
• 2011

In this paper, the effect of pulse current and generated heat on characteristics of the LED is measured and evaluated. For experiments, the LED driving circuit and digital logic which determines period and duty ratio of lighting are designed. At rated current, the temperature and optical characteristics of the LED with change in duty ratio and period are compared, and those of the LED with change in duty ratio and existence of cooling fan are also compared at constant average current. As a result, frequency does not affect device temperature and optical characteristic of the LED but duty ratio does. Also, the cooling fan is less effective on those of the LED at rated current.