• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2007년도 하계학술대회 논문집 Vol.8
• /
• pp.261-262
• /
• 2007

In this study we present the effect of annealing temperatures on the structural, electrical and optical characteristics of Ga-doped ZnO(GZO) films. GZO target have been deposited on corning 7059 glass substrates by DC sputtering. GZO films were annealed at temperatures of 400, 500, $600^{\circ}C$ in air ambient for 20 min. Experimental resulted in as-grown film shows the resistivity of $6{\times}10^{-1}\;{\Omega}{\cdot}cm$ and transmittance under 85%, whereas the electrical and optical properties of film annealed at $500^{\circ}C$ are enhanced up to $1.9{\times}10^{-3}\;{\Omega}{\cdot}cm$ and 90%, respectively.

• Journal of the Optical Society of Korea
• /
• 제8권2호
• /
• pp.83-89
• /
• 2004

A variable optical attenuator with a bending-sensitive fiber (BSF) that can be used in optical networks is developed. The refractive index profile of the BSF is divided into four regions which are inner core, center dip of inner core, outer core and clad. The 3-dimensional finite difference beam propagation method (3D FD-BPM) is utilized to find the characteristics of the BSF, so the mode profile of the BSF and optical power attenuation according to the bending are investigated, and the equivalent model of the BSF is made. By using this equivalent model of the BSF, the BSF is fabricated, and the refractive index profile of the BSF is measured, which is similar to refractive index profile of the proposed BSF. The fabricated variable optical fiber attenuator (VOFA) consists of the BSF in a rectangular rubber ring with a fixed bend radius (BR) in a steady state. The VOFA using the proposed BSF was able to attenuate the optical power by more than about －38 ㏈ at certain wavelengths (1540∼1560 nm) based on adjusting the mechanical pressure applied to the upper surface of the rectangular rubber ring with the bent BSF. In addition, the proposed VOFA produced an insertion loss of 0.68 ㏈, polarization dependent loss (PDL) of about 0.5 ㏈, and return loss of less than －60 ㏈.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2006년도 영호남 합동 학술대회 및 춘계학술대회 논문집 센서 박막 기술교육
• /
• pp.74-76
• /
• 2006

An external electrode fluorescent lamp (EEFL) has an advantage of a long lifetime in the ear1y stages of the study on plasma discharge, interest in the lamp continues. Researches on the operation of external electrode fluorescent lamps have focused mainly on its use of a type of high frequency (MHz). By performing high brightness using a square wave operation method with the low frequency below 100kHz, which is applied to a narrowed tube type lamp that has several mm of lamp diameter, EEFL presented the possibility of using it as a light source for back-lights. However, because EEFL generates plasma using wall charges, which considers the impedance characteristics of glass based on the structural principle in discharge, it can be significant1y affected by frequency. Thus, this study verified the change in the characteristics of electromagnetic fields according to the change in frequency through a Maxwell's electromagnetic field simulation and examined the relationship between the change in the EEFL frequency and brightness by measuring the optical characteristics. In addition, the characteristics of the transformation of energy orbits were verified by investigating the characteristics of the wavelength according to the change in frequency through the OES.

• 한국전기전자재료학회논문지
• /
• 제24권11호
• /
• pp.915-919
• /
• 2011

We analyzed various forces affective to the charged particles in closed space, to explain the image degradation and lifetime-shortening phenomena because of particle lumping which is one of the serious problems in reflective displays. It is possible to predict the quantity of q/m which is the most important parameter in determining the optical and electrical characteristics, by calculating the image force and kinetic energy. For stable driving, the quantity of q/m must be in the defined range but it changes during the fabrication process, so we added the filtering process to solve this problem and obtained the well-defined nonlinear driving voltage coinciding with the threshold voltage. And we obtained the fully-driving property which prevents the particle lumping and decides the image quality and lifetime of panel from the optical characteristics and occupation surface of moving particles.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 1993년도 정기총회 및 추계학술대회 논문집 학회본부
• /
• pp.275-277
• /
• 1993

It is practically required to develop an optical transmission system, for the diagnosis of electric power apparatus, which enables to distinguish the right signals related to the partial discharge taken place inside the apparatus. These partial discharges are transformed into ultra sonic signals by the sensor and then used for the voltage application to pokels cell. Afterwards, the modulated laser beam is transmitted through the optical fiber. Throughout this work, a laser-beam based detecting system is developed and permits us to reproduce the transmitted signals indirectly without electromagnetic interference. For this purpose the characteristics of this system is well analyzed by means of different type of signals from function generator.

• 전기의세계
• /
• 제24권5호
• /
• pp.82-90
• /
• 1975

This study investigated the deterioration phenomena of the Polyethylene surface contaminated with organic(Saccharose) or inorganic(NaCl) matters through electrical and optical experiments. And also these experimental results relatively well coincided with which was treated by theoretical process. On the electrical experiment, relation between electric field intensity in corona discharge and time reached to the breakdown, and relation between total amount of charges discharged and increment of applied voltage were investigated. On the optical experiment, discharge time dependence of surface deterioration rate and process of surface deterioration in the X-ray diffraction pattern were investigated. It was concluded that chemical effects by the corona discharge deteriorated insulation characteristics of Polyethylene surface.

• 한국전기전자재료학회논문지
• /
• 제16권10호
• /
• pp.902-907
• /
• 2003

In this paper, the ITO thin film, which is considered as one of the most currently used material for the high performance transparent conducting films for the PDP cell, was made in a parallel-plate, capacitively coupled DC magnetron sputtering system. Some electrical and optical properties of ITO films were investigated and discussed on the basis of glow discharge characteristics. The optimized thin film fabricating conditions of Ar gas pressure and substrate temperature were derived from the Paschen curve and glow discharge characteristics. The maximum transmittance of 89.61 % in the visible region and optical band gap of 3.89 eV and resistivity of 1.67${\times}$10$\^$-3/ $\Omega$-cm were obtained under the conditions of 300 C of substrate temperature and 10∼15 mtorr of pressure, which corresponds nearly to that of Paschen minimum.

• 한국정보디스플레이학회:학술대회논문집
• /
• 한국정보디스플레이학회 2002년도 International Meeting on Information Display
• /
• pp.511-513
• /
• 2002

Electro-optical characteristics of new multi-domain vertical-alignment (MVA) liquid crystal displays (LCDs) with negative dielectric anisotropy on a homeotropic photopolymer were studied. Good voltage-transmittance (V-T) curves by the new MVA-LCD on the homeotropic photo-polymer were obtained. Also, the stable response time of MVA-LCD on the homeotropic photopolymer can be achieved. The viewing angle of the new MVA-LCD could be improved by the grating groove with UV exposure and development on the photo-polymer.

• 한국조명전기설비학회:학술대회논문집
• /
• 한국조명전기설비학회 2004년도 학술대회 논문집
• /
• pp.69-72
• /
• 2004

In this paper, we measured the electrical and optical characteristics of an electrodeless fluorescent lamp system as product of the inside and outside of the country and compared the measured data. Output current wave of domestic 150 W is unstable than it's of Endura 150 W. But the former of spend time after discharging and output current value is small than the latter. And optical characteristics(brightness, flux, color rendering index, efficiency) value of the former is a little small than the latter. In conclusion, if we improve a little more quality then we must secure the superiority in competition.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2001년도 하계학술대회 논문집 C
• /
• pp.1561-1563
• /
• 2001

In this paper, an novel optical measuring system based on the electro-optic effect has been proposed and realized using Pockels cell with a view to detecting partial discharge taking place at the needle plane electrode. This system has the following advantages ; nonmetallic probe sensor, immune to external EMI noise and broad band response of the Pockels cell from DC to GHz. And also it is constructed by He-Ne laser, optical fiber, $LiNbO_3$ Pockels cell, photo detector, grin lens, oscilloscope and PC. The characteristics of the developed prototype sensor are investigated under AC and corona discharges.