• International journal of advanced smart convergence
• /
• v.5 no.2
• /
• pp.73-79
• /
• 2016

Remote sensing and measurement are of paramount importance of providing information on the state of water quality in water bodies. The formation and growth of cyanobacteria is of serious concern to in land aquatic life forms and human life. The main cause of water quality deterioration stems from anthropogenic induced eutrophication. The goal of this research to quantify and determine the spatial distribution of cyanobacteria concentration in the water using remote sensing technique. The standard approach to measure water quality based on the direct measurement of the fluorescence of the chlorophyll a in the living algal cells and the same approach used to detect the phycobilin pigments found in blue-green algae (a.k.a. cyanobacteria), phycocyanin and phycoerythrin. This paper propose the emerging sensor design to measure the water quality based on the optical analysis by fluorescence of the phycocyanin pigment. In this research, we developed an method to sense and quantify to derive phycocyanin intensity index for estimating cyanobacteria concentrations. The development of the index was based on the reflectance difference between visible light band 620nm and 665nm. As a result of research this paper presents, an optical biological sensor design information to measure the Phycocyanin parameters in water content.

• The Journal of the Korea institute of electronic communication sciences
• /
• v.3 no.4
• /
• pp.289-294
• /
• 2008

Affordable traffic capacity of each node in networks is expected to reach in Tb/s range in proportion to the rapid growth of Internet users. To transmit more than Tb/s per fiber pair, WDM should be used as well as existing TDM. To increase the capacity of transmission in WDM networks, there are two ways, increasing channel speed or channel quantity. To increase the channel quantity, there are two ways, narrow spacing or expanding transmission bandwidth. To expand bandwidth, ultra-broadband optical amplifier technology is necessary. In this paper, we introduce EDFA in effect at C/L band, FRA, and some optical amplifiers in effect at S band, and analyze the development trend of various amplification technologies.

• Journal of the Korean Society of Manufacturing Technology Engineers
• /
• v.19 no.2
• /
• pp.275-281
• /
• 2010

This research's goal is to process directly aspherics with big sagment and thin center thickness. If we can process directly aspherics with big sagment and thin center thickness, we think it greatly helps to reduce the time of developing optical system. We made very thin glass using diamond grinding whetstone regarding the trace of tool and the detailed drawing of tool super precisive aspherics that has 0.46mm center thickness and over $30^{\circ}$ segment, $0.1{\mu}m$ machining accuracy, 15nm surface accuracy. We think this research's result will be effective to open new market because it is applied not only cell phone optical system but also CCTV robot optical system, internet phone optical system. Also we expect to enhance the super strong brittle precisive process's possibility with super precisive processing technique that achieves 0.46mm glass center thickness as first in the world.

• Journal of Digital Convergence
• /
• v.20 no.3
• /
• pp.389-397
• /
• 2022

As increasing the growth of the Internet in medical area, a new technology to transmit effectively massive medical data is required. In optical internet, all OBS nodes have fiber delay lines, hardware components. These components are calculated under some optimal traffic conditions, and this means that if the conditions change, then the components should be altered. Therefore, in this article a new service differentiation algorithm using the previously installed components is proposed, which is used although the conditions vary. When traffic conditions change, the algorithm dynamically recalculates the threshold value used to decide the length of data bursts. By doing so, irrelevant to changes, the algorithm can maintain the service differentiation between classes without replacing any fiber delay lines. With the algorithm, loss sensitive medical data can be transferred well.

• Journal of the Institute of Electronics Engineers of Korea TC
• /
• v.40 no.10
• /
• pp.119-128
• /
• 2003

The rapid increase of Internet users, diversity of application services, high speed data transmission, and extension of application areas have resulted in exponential growth of Internet traffic. In order to satisfy the increasing demand of bandwidth, the MPλS protocol, which is based on MPLS for efficient integration of WDM and IP protocols, has been suggested by IETF. In this paper, we present an MPλS simulator which enables to simulate various MPλS function such as optical crossconnect (OXC), multi-wavelength links, routing and wavelength assignment(RWA), and MPλS signaling and control. The simulator is developed based on the ns-2, an widely used multi-protocol network simulator. The function of the simulator is validated by running many simulation based on various scenarios and performance measures such as throughput and blocking probability. The simulator could be widely utilized for validation of proposed protocols before developing real optical network systems.

• KSII Transactions on Internet and Information Systems (TIIS)
• /
• v.8 no.7
• /
• pp.2325-2349
• /
• 2014

Network virtualization technology plays a key role in cloud computing, which serves as an effective approach for provisioning a flexible and highly adaptable shared substrate network to satisfy the demands of various applications or services. Recently, the problem of mapping a virtual network (VN) onto a substrate network has been addressed by various algorithms. However, these algorithms are typically efficient for unicast service-oriented virtual networks, and generally not applicable to multicast service-oriented virtual networks (MVNs). Furthermore, the survivable MVN mapping (SMVNM) problem that considers the survivability of MVN has not been studied and is also the focus of this work. In this research, we discuss SMVNM problem under regional failures in the substrate network and propose an efficient algorithm for solving this problem. We first propose a framework and formulate the SMVNM problem with the objective of minimizing mapping cost by using mixed integer linear programming. Then we design an efficient heuristic to solve this problem and introduce several optimizations to achieve the better mapping solutions. We validate and evaluate our framework and algorithms by conducting extensive simulations on different realistic networks under various scenarios, and by comparing with existing approaches. Our simulation experiments and results show that our approach outperforms existing solutions.

• KSII Transactions on Internet and Information Systems (TIIS)
• /
• v.6 no.12
• /
• pp.3315-3337
• /
• 2012

Crowded scenes analysis is a challenging topic in computer vision field. How to detect diverse motion patterns in crowded scenarios from videos is the critical yet hard part of this problem. In this paper, we propose a novel approach to mining motion patterns by utilizing motion information during both long-term period and short interval simultaneously. To capture long-term motions effectively, we introduce Motion History Image (MHI) representation to access to the global perspective about the crowd motion. The combination of MHI and optical flow, which is used to get instant motion information, gives rise to discriminative spatial-temporal motion features. Benefitting from the robustness and efficiency of the novel motion representation, the following motion pattern mining is implemented in a completely unsupervised way. The motion vectors are clustered hierarchically through automatic hierarchical clustering algorithm building on the basis of graphic model. This method overcomes the instability of optical flow in dealing with time continuity in crowded scenes. The results of clustering reveal the situations of motion pattern distribution in current crowded videos. To validate the performance of the proposed approach, we conduct experimental evaluations on some challenging videos including vehicles and pedestrians. The reliable detection results demonstrate the effectiveness of our approach.

• The Journal of the Institute of Internet, Broadcasting and Communication
• /
• v.19 no.4
• /
• pp.93-98
• /
• 2019

On today, optical system are the next generation weapon systems being studied in many countries, starting from USA. One of the most important technologies in optical system is a high-speed automatic target tracking system that can continuously track high-speed moving small targets. This paper designs an automatic target tracking system based on a correlated trekker that is robust against rapid shape changes for fast moving targets and small targets at a distance. The proposed system showed about 98% success rate in response to the targets that are under a complex background such as drone, ranger, etc.

• The Journal of the Institute of Internet, Broadcasting and Communication
• /
• v.19 no.1
• /
• pp.247-252
• /
• 2019

The diffraction properties of optical signals by multi-layered periodic structures is formulated in two-dimensional space by using Fourier expansions associated with basic grating profile. The fields in each layer are then expressed in terms of characteristic modes, and the complete solution is found rigorously by using a modal transmission-line theory(MTLT) to address the pertinent boundary-value problems. Such an approach can treat periodic arbitrary gratings containing arbitrarily shaped dielectric components, which may generally have optical properties along directions that are parallel or perpendicular to the multi-layers. This paper illustrates the present approach by comparing our numerical results with data reported in the past for simple periodic circular 2D structures. In addition, this proposed theory can apply easily for more complex configurations, which include multiple periodic regions with several possible canonic shapes and high dielectric constants.

• The Journal of the Institute of Internet, Broadcasting and Communication
• /
• v.21 no.4
• /
• pp.143-148
• /
• 2021

A systematic study of Bloch surface wave (BSW), which is created by guided mode resonance (GMR) of dielectric multilayer structures with a grating profile, is presented to analyze the sensing performance of bio-sensors. The effect of structural parameters on optical behavior is evaluated by using Babinet's principle and modal transmission-line theory. The sensitivity of designed bio-sensors is proportional to the grating constant at wavelength spectrum, and inversely proportional to the normal wave vector of incident electromagnetic wave at angular spectrum. Numerical results for two devices with SiO/SiO₂ and TiO₂/SiO₂ multilayer dielectric stacks are presented, showing that BSW can be exploited for the realization of efficient diffraction-based bio-sensors from infrared to visible-band range.