• Journal of the Korean Wood Science and Technology
• /
• v.25 no.2
• /
• pp.88-99
• /
• 1997

뉴질랜드산(産) 라디아타소나무의 수간(樹幹) 및 지재(枝材)에 발달(發達)되어 있는 압축이상재(壓縮異常材), 대응재(對應材) 및 측면재(側面材)의 해부학적(解剖學的) 특성(特性)을 광학현미경(光學顯微鏡), 주사전자현미경(走射電子顯微鏡) 그리고 투과전자현미경(透過電子顯微鏡)을 이용하여 조직학적(組織學的) 및 구성요소(構成要素)의 수량적(數量的) 측면(側面)에서 비교(比較), 검토(檢討) 하였다. 조직학적(組織學的)인 면(面)에서 볼 때 춘재(春材)로부터 추재(秋材)로의 가도관(假導管) 이행(移行)은 대응재(對應材)나 측면재(側面材)보다 압축이상재(壓縮異常材)가 훨씬 더 점진적(漸進的)이었다. 편심생장(偏心生長)으로 인해 연륜폭(年輪幅)은 압축이상재(壓縮異常材)가 가장 컸고 그 다음이 측면재(側面材) 및 대응재(對應材)의 순이었으며 추재솔(秋材率) 역시 압축이상재(壓縮異常材)가 대응재(對應材) 및 측면재(側面材)보다 컸다. 횡단면상(橫斷面上) 가도관(假導管) 형상면(形狀面)에서 압축이상재(壓縮異常材)가 원형(圓形)을 나타내는 반면 대응재(對應材)와 측면재(側面材)는 각형(角形)을 띠고 있었다. 또한 압축이상재(壓縮異常材)에서만 가도관(假導管)의 세포벽(細胞壁)에 나선강(螺旋腔)과 나선열(螺旋裂) (helical cavity and check), 슬릿(slit)형(形) 벽공구(壁孔口)가 존재(存在)하였으나 $S_3$층(層)이 결여(缺如)되어 있었으며 굴곡(屈曲)된 선단(先端)과 불규칙(不規則)한 형상(形狀)의 가도관(假導管) 및 세포간극(細胞間隙)이 자주 관찰(觀察)되었다. 직교분야(直交分野) 벽공(壁孔)은 압축이상재(壓縮異常材)가 가문비나무형(型) 그리고 대응재(對應材) 및 측면재(側面材)는 소나무형(型) 벽공(壁孔)을 나타냈다. 수량적(數量的) 특성(特性) 면에서 볼 때 가도관(假導管)의 길이는 압축이상재(壓縮異常材)가 가장 짧고 측면재(側面材)가 가장 길었으며 가도관(假導管)의 벽(壁) 두께는 압축이상재(壓縮異常材)가 대응재(對應材)나 측면재(側面材)보다 두꺼웠다. 수직수지구(垂直樹脂溝)는 대응재(對應材)가 그리고 수평수지구(水平樹脂溝)(방추형(紡錐形) 방사조직(放射祖織))는 압축이상재(壓縮異常材)의 쪽이 많았다. 결론적(結論的)으로 보면 라디아타소나무의 압축이상재(壓縮異常材)는 근본적으로 대응재(對應材)나 측면재(側面材)와는 상이(相異)한 특성(特性)을 지녔으나 대응재(對應材)와 측면재(側面材)는 거의 유사(類似)한 특성(特性)을 공유(共有)하는 것으로 밝혀졌다.

• Journal of the Korean Wood Science and Technology
• /
• v.42 no.3
• /
• pp.327-338
• /
• 2014

Relationship between growth rate and wood quality was investigated by physical and mechanical properties with Quercus rubra (24 years old) from five different origin of apricot. In greenwood moisture content, sapwood had higher moisture content than heartwood, and there was difference among different origin of apricot. There were different specific gravity of wood among different origin of apricot. Compared with higher growth rate with higher specific gravity in sapwood, opposite trend was observed in heartwood. There were difference in shrinkage based on origin of apricot, and higher growth rate wood had higher shrinkage and T/R ratio. Compression Young's modulus, bending strength, bending Young's modulus, and compact strength was difference among different origin of apricot. Higher growth rate wood had higher tensile strength, and also there was difference amont different origin of apricot. In hardness, 3 different directions had all difference among different origin of apricot, and higher growth rate wood showed higher hardness than others. Based on overall physical and/or mechanical properties and growth rate, apricot from Bancroft was best quality in current.

• Journal of the Korean Wood Science and Technology
• /
• v.40 no.1
• /
• pp.44-52
• /
• 2012

This study examined the effects of the drying rate, temperature distribution and vapor pressure on the surface checks occurring during the air circulating oven-drying of hollowed short Japanese larch (Larix Kaemferi C.) round posts treated with coating (CO) and vapor-dam (VD). The hollowed round posts could be dried from the green condition to a moisture content of approximately 8% in 72 to 144 hours. The temperature in the hole was higher than that inside of wood for Control and VD specimens, while VD specimen showed opposite distribution. The vapor pressure inside the wood was higher than that in the hole for the CO and VD specimens during hole drying stage. There were few surface checks found in the specimens but the number increased in order the of CO, VD and Control specimens.

• Journal of the Korean Wood Science and Technology
• /
• v.31 no.2
• /
• pp.31-37
• /
• 2003

Among the nondestructive evaluation (NDE) methods for wood defect detection, ultrasonic wave has been considered as competitive technique in terms of economics and workability. Until now, researches on application of NDE methods for wood have focused mainly on standing tree and logs. Recently, some attempts have been conducted with NDE technique, for evaluation of wooden structural members. However, wooden structural members are different from others (standing tree or log) in various aspects. Expecially when some parts or whole member are covered with other materials, they can't be evaluated appropriately on general NDE methods. For the purpose of development of proper NDE technique for the wooden structural members, the ultrasonic wave transmission process investigated on artificial defect in wood. First, various types of transmission process were assumed, and then the transmission times were predicted respectively. Predicted times were compared with the measured time of ultrasonic wave and then a suitable type of transmission process is determined. In case of the ultrasonic wave doesn't transmit directly due to defect, it is reflected once only at the opposite surface of member, and the path is accord with the line of shortest length.

• Journal of the Korean Wood Science and Technology
• /
• v.46 no.5
• /
• pp.437-448
• /
• 2018

Physical characteristics of Korean red pine (Pinus densiflora) were investigated with different cultivation locations in Taebaek Mountains as Goseong-gun, Hongcheon-gun and Bonghwa-gun as experimental sites. Moisture content based on air-dried or green (artificial) wood was no significant differences with different cultivation places. Specific gravities of both sapwood and heartwood of red pine from Bonghwa-gun were higher than those from other two sites (Hongcheon-gun or Goseong-gun). Specific gravity of heartwood of red pine from Goseong-gun was higher than it from Hongcheon-gun, but this trend was opposite in case of sapwood. Higher specific gravity of red pine heartwood from Goseong-gun maybe resulted in higher strength than those of other sites. In shrinkage ratio, there was no significant difference among different cultivation places in radial directions, but red pine from Bonghwa-gun was higher than those of other sites in tangential directions. Hygroscopicity was no significant differences with different cultivation places. These results will be helpful information for efficient use of pinewood and good quality of pinewood production for genetical breeding improved.

• International Area Studies Review
• /
• v.21 no.1
• /
• pp.181-200
• /
• 2017

This study investigates the impact of exchange rate and exchange rate volatility on the stock prices of eight industries from 2006 to 2015. The first and second exchange rate exposure of these eight industries is estimated with respect to four different exchange rates, namely the US dollar, Japanese yen, European currency unit, and British pound. In exchange rate exposure, stock prices in foods-beverages, paper-wood, electricity-gas, and banks industries are negatively related to exchange rate, whereas stock prices in electrical-electronic equp. and transport-equp. industries are positively related to exchange rate as expected. However stock price in machinery industry is negatively related to exchange rate, which is opposite to the expectation. Negative relationship is found between stock price in chemicals industry and exchange rate. In exchange rate volatility exposure, stock price in paper-wood industry is found to be negatively related to exchange rate volatility. Stock price in banks industry is also negatively related to exchange rate volatility. This result is opposite as expected, because banks are supposed to get more revenue by issuing derivatives related to foreign exchange when exchange rate volatility increases.

• Journal of the Korean Wood Science and Technology
• /
• v.37 no.3
• /
• pp.192-199
• /
• 2009

This study was carried out to investigate the performance of a radio-frequency/vacuum dryer combined with a mechanical compressive load (RF/VC) with a scale of about $3m^3$ during drying board of Azobe (Lophira alata) and Korean red pine (Pinus densiflora). The degree of vacuum of the RF/VC system was maintained at 80~105 torr, and wood temperature was increased from $40^{\circ}C$ at the beginning of drying to $60^{\circ}C$ at the end of drying and the radiofrequency generator was operated with schedule of 7 minute-ON and 3 minute-OFF. The wood temperatures near charge plate always remained higher than those of the control during all of the drying stage, whereas the wood temperature near ground plate always remained lower than those of the controlled. As drying time proceeding, the temperature of the wood near ground plate presented lower than those of the control. Whereas the temperature of the wood near charge plate presented higher than those of the controlled. The final average moisture contents of the Azobe boards stacked near the input side of the RF generator showed slightly lower than those near the opposite side. Those of the wood stacked in the layers near the charge plate were lower than those of near the ground plate. The average length of surface checks of the Azobe boards stacked near the charge plate was very slight, whereas that toward the ground plate represented high values. The efficiency of input energy was simliar with the commercial systems.

• Journal of the Korean Wood Science and Technology
• /
• v.40 no.4
• /
• pp.244-256
• /
• 2012

The anatomical characteristics of the ten Indonesian wood species (Gmelina, Jeunjing, Mangium, Durian, Gandaria, Jengkol, Kupa, Mangga, Nanaka and Rambutan) were investigated by optical microscopy. All the species were diffuse-porous with solitary and radial pore multiple. In Mangium, however, tangential pore multiple was observed as well. Tangential diameter of pore was larger than that of radial one except for Jeunjing and Nangka. Nangka showed the largest tangential diameter of pore among the species. Vessel number per $mm^2$ of Mangium, Gandaria and Kupa was higher than that of the other species. Especially Kupa showed highest vessel number. The tangential width of axial parenchyma cell in Gmelina, Mangium, Kupa and Mangga was larger than that of wood fiber, while the other species showed the opposite trend. Mangium was the largest in tangential width of axial parenchyma cell. Rays were homocellular composed only of procumbent cell in Gmelina, Jeunjing and Rambutan. Heterocellular rays composed of procumbent cells in the body and one row of upright and/or square in the margin are observed in Gandaria. Mangium, Durian, Jengkol, Kupa, Mangga and Nangkabody showed heterocellular rays composed of procumbent cells in the body and mostly 1~2 rows of upright and/or square cells in the margin. Crystals occurred in Durian, Gandaria, Jengkol, Jeunjing, Mangga and Rambutan and silica in Jeunjing and Mangga.

• Journal of the Korean Wood Science and Technology
• /
• v.26 no.4
• /
• pp.26-33
• /
• 1998

Acoustical properties of chestnut and paulownia woods have been determined in four film thicknesses of oriental lacquering and cashew varnishing on double surfaces of soundboard to elucidate effects of finishing. Accelerometer was attached to the specimen at one third position from one end, and specimen was hit by the impact hammer at one third position from opposite end. Data were processed by vibration analyzer. The ratio of axial-to-transverse sound velocity of untreated specimens of chestnut and paulownia were 3.25 and 5.34, respectively. Natural frequency, specific Young's modulus, acoustical coefficient, sound velocity, damping of sound radiation(DSR) and acoustical converting efficiency(ACE) decreased by oriental lacquering and cashew varnishing for both species. Damping of internal friction of chestnut decreased by oriental lacquering and cashew varnishing, but that of paulownia increased. Natural frequency. specific Young's modulus, acoustical coefficient, sound velocity, and DSR decreased with increased film thickness of both finishing materials. However, damping of internal friction and ACE showed irregular tendency with increased film thickness. Acoustical properties of cashew varnished chestnut specimen were better than those of oriental lacquered specimen. Acoustical properties of oriental lacquered paulownia specimen were better than those of cashew varnished specimen.

• Advances in Computational Design
• /
• v.4 no.3
• /
• pp.251-272
• /
• 2019

This study performed lateral load testing on seventeen wood wall frames in two sections. Section one included eight tests studying structural foam sheathing of shear walls subjected to monotonic loads following the ASTM E564 test method. In this section, the wood frame was sheathed with four different types of structural foam sheathing on one side and gypsum wallboard (GWB) on the opposite side of the wall frame, with Simpson HDQ8 hold down anchors at the terminal studs. Section two included nine tests studying wall constructed with oriented strand board (OSB) only on one side of the wall frame subjected to gradually applied monotonic loads. Three of the OSB walls were tied to the baseplate with Simpson LSTA 9 tie on each stud. From the test results for Section one; the monotonic tests showed an 11 to 27 percent reduction in capacity from the published design values and for Section two; doubling baseplates, reducing anchor bolt spacing, using bearing plate washers and LSTA 9 ties effectively improved the OSB wall capacity. In comparison of sections one and two, it is expected the walls with structural foam sheathing without hold downs and GWB have a lower wall capacity as hold down and GWB improved the capacity.