• Journal of Korea Technical Association of The Pulp and Paper Industry
• /
• v.37 no.5 s.113
• /
• pp.8-14
• /
• 2005

The difference of whiteness, brightness and lightness was clearly explained in this paper by use of a tinting dye and a fluorescent whitening agent which are commercially widely used to make paper look whiter. Other optical properties such as tint, color shade, and color difference were also discussed. It is concluded that in comparing two tinting dyes, lightness (L*) is the most important property to be compared, while whiteness data should be used in caution in order not to surpass its significant range, and a*, b* values can also be used to find the change of color shades together with ${\Delta}E$ as color difference. In comparing two fluorescent whitening agents, whiteness or brightness values are most important to be compared, but lightness values are not suitable for this purpose; a*, b* and color difference ${\Delta}E$ can also be referred, but with less significance.

• 한국정보디스플레이학회:학술대회논문집
• /
• 2006.08a
• /
• pp.973-976
• /
• 2006

In this paper, the inorganic multi-layer encapsulation of thin film was newly adopted to protect the organic layer from moisture and oxygen. Using the electron beam, Sputter, inorganic multi-layer thin-film encapsulation was deposited onto the Ethylene Terephthalate(PET) and their interface properties between inorganic and organic layer were investigated. In this investigation, the SiON $SiO_2$ and parylene layer showed the most suitable properties. Under these conditions, the water vapor transmission rate (WVTR) for PET can be reduced from level of $0.57g/m^2/day$ (bare substrate) to $1^{\ast}10^{-5}g/m^2/day$ after application of a SiON and $SiO_2$ layer. These results indicate that the $PET/SiO_2/SiON/Parylene$ barrier coatings have high potential for flexible organic light-emitting diode(OLED) applications.

• Journal of Korea Foundry Society
• /
• v.32 no.5
• /
• pp.231-240
• /
• 2012

In present study, the effect of heat treatment on the microstructure and mechanical properties of the gravity cast superchargers housing using A356 alloy were investigated. In order to identify the characteristics of superchagers housing casting with heat treatment, Vickers hardness test, electrical conductivity test, opical and scanning electron microscopy were performed. And also, to investigate their mechanical properties, the T6 treated superchagers housing casting in optimum heat treatment condition were carried out tensile test using UTM (Universal Testing Machine).

• Proceedings of the Korean Institute of Surface Engineering Conference
• /
• 2012.11a
• /
• pp.137-138
• /
• 2012

ZnO 박막을 Sol-gel용액을 이용한 스핀코팅 방법으로 석영기판 위에 성장하였고 Sol-gel 용액의 온도 변화에 따른 구조적, 광학적 특성을 분석하였다. ZnO 박막의 구조적, 광학적 특성을 조사하기 위해 field-emission scanning electron microscopy, X-ray diffraction (XRD), photoluminescence (PL), 그리고 ultraviolet-visible (UV) spectroscopy을 사용하였다. PL 분석에서 ZnO 박막은 orange 계열의 발광을 하였으며, PL spectra는 3.3 eV 부근의 near-band edge emission (NBE) 피크와 2.0 eV 부근의 deep-level emission (DLE) 피크로 이루어져있다. 모든 sol-gel 용액 온도에서, DLE 피크가 NBE 피크보다 더 우세하고 이 DLE 피크는 sol-gel 용액의 온도가 증가함에 따라 점점 증가하다가 감소하는 것을 알 수 있다. 이런 DLE 피크는 산소 공공, 아연 공공, 침입형 산소, 침입형 아연 등과 같은 결함에 의한 것이며, ZnO 박막은 sol-gel 용액의 온도에 따라 결함의 특성이 변화하였다.

• Korean Journal of Optics and Photonics
• /
• v.14 no.3
• /
• pp.338-342
• /
• 2003

We have studied the properties of stimulated Brillouin scattering (SBS) in an optical fiber using optical pulses and continuous wave light. We find that the thresholds for SBS are the same when the averaged power of pulse light is the same as the power of cw light. From this result, the SBS threshold of pulse light can be deduced from that of continuous wave light, which can be obtained easily and accurately.

• Journal of the Korean Crystal Growth and Crystal Technology
• /
• v.13 no.4
• /
• pp.162-167
• /
• 2003

In order to evaluate the properties of the sintered zirconia for optical ferrule, specimens were prepared at 1350, 1400 and $1450^{\circ}C$ using starting materials supplied by A, B and C providers. Crystallinity, microstructure and mechanical strength were tested as a function of sintering temperature. Crystallinity of the sintered specimens was determined by X-ray diffraction analysis. A field emission-scanning electron microscope was used for studying the microstructure after sintering. Bending strength and Vickers' hardness were also examined by universial tester and Vickers' hardness tester, respectively. The specimen B sintered at $1350^{\circ}C$ was favorable because of its high tetragonality and good mechanical strength for practical usage.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.21 no.12
• /
• pp.3277-3285
• /
• 1996

In this paper, w designed an opical power distribution device for application to an optical switching and an optical subscriber loop. We fabricated PSG thin film by LPCVD. Based on the measured index of fabricted thin film, rib-type waveguide was transformed to two-dimension by the effective index method and we simulated dispersion property to find asingle-mode condition. We found that the optimum design parameters of rib-type waveguide are:cladding layer of 3.mu.m, core layer of 3.mu.m, buffer layer of 10.mu.m, and core width of 4.mu.m. Each side of the guiding region was etched down to 4.mu.m to shape the core. We used these optimum parameters of the rib-type waveguide with branching angle of 0.5.deg. and simulted the Y-branch waveguide by the BPM simulation. Numerical loss in branching area was claculated to be 0.1581dB and equal to the total loss of the Y-branch. The loss of the fabricated Y-branch waveguide on PSG film ws 1.6dB at .lambda.=1.3.mu.m before annealing but was 1.2dB after annealing at 1000.deg. C for 10 minutes. Consequently, the loss of branching area from 3000.mu.m to 6000.mu.m in the z-direction was 0.8dB, and single-mode propagation was confirmed by measuring the near field pattern. For coupling the fabricated Y-branch waveguide with an optical fiber, we fabricated V-groove which was used as the upholder of optical fiber. An etching angle was 54.deg. and the width and depth of guiding groove was 150.mu.m, 70.mu.m, respectively. The optical fiber is inserted onto V-groove. Both the Y-branch and V-groove were connected through the index matching oil. Coupling loss after connecting Y-branch and the optical fiber on V-groove was 0.34dB and that after injecting index mateching oil was 0.14dB.

• Korean Journal of Materials Research
• /
• v.11 no.6
• /
• pp.448-452
• /
• 2001

The ZnS:Cu,Cl thick film electroluminescent devices with the stacking type(separated with phosphors and insulator layers) and the composite type (mixed with phosphor and insulator materials) emission layers were fabricated on ITO/glass substrates by the screen printing methods. The opical and electrical properties were investigated as fundations of applied voltages and frequencies. In the stacking type, the luminance was about 58 cd/$\m^2$ at the applied voltage of 400Hz, 200V and increased to 420 cd/$\m^2$ with increasing the frequency to 30Hz. For the composite type devices, the threshold voltage was 45V and the maximum luminance was 670 cd/$\m^2$ at the driving condition of 200V, 30Hz. The value of luminance of the composite type device showed 1.5 times higher than that of stacking type device. The main emission peak was 512 nm of bluish-green color at 1Hz frequency below and shifted to 452 nm in the driving frequency over 5Hz showing the blue omission color. There were no distinct differences of the main emission peaks and color coordinate for both samples.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.18 no.9
• /
• pp.1248-1256
• /
• 1993

The propagation and delay properties in opical fiber are particularly attractive because digital signal processing and conventional analog signal processing techniques such as those using surface acoustic wave devices are limited In their usefulness for signal bandwidth exceeding one or two GHz, although they are very effective at lower frequencies. Since an accurate, low loss and short time delay elements can be obtained by using such an optical fiber, optical signal precessing has attracted much attention for high speed and broad-band signal precessing in particular channel separation filtering for optical FDM signals. In this paper, we consider a coherent optical lattice filter, which uses coherent light sources and consists of directional couplers and optical fiber delay elemnts. The optical fiber fitters are more restricted than the usual digital filters. The reasons are as follows. 1) the coupling coefficients of directional couplers are restricted to the number between 0 and 1. 2) optical signal E(complex amplitude) is divided into J If-$\boxUl$ and J L/7$\div$$\boxUl$ at the directional coupler. Considering these restrictions and in this case all the coupling coefficients of summing and branching elements are set to be equal, we have given design formulae for optical lattice filter, which make the best use of optical signal energy.