DOI QR코드

DOI QR Code

Effect of Heat Treatment on the Microstructure and Mechanical Properties of the Gravity Cast Superchargers Housing Using A356 Aluminum Alloy

A356 알루미늄 합금 슈퍼차저 하우징의 미세조직과 기계적 성질에 미치는 열처리의 영향

  • Kim, Dae-Hwan (i-Cube Center, Engineering Research Institute, Gyeongsang National University) ;
  • Van, Guen-Ho (i-Cube Center, Engineering Research Institute, Gyeongsang National University) ;
  • Seong, Bong-Hak (i-Cube Center, Engineering Research Institute, Gyeongsang National University) ;
  • Cho, Bok-Hwan (Dongeui University) ;
  • Eom, Jeong-Pil (Gyeongnam Technopark) ;
  • Park, Seong-Gi (YUJIN Non-Ferrous Metal Company) ;
  • Lim, Su-Gun (i-Cube Center, Engineering Research Institute, Gyeongsang National University)
  • 김대환 (경상대학교, i-Cube Center 공학연구원) ;
  • 반근호 (경상대학교, i-Cube Center 공학연구원) ;
  • 성봉학 (경상대학교, i-Cube Center 공학연구원) ;
  • 조복환 (동의대학교) ;
  • 엄정필 (경남테크노파크) ;
  • 박성기 (유진금속공업(주)) ;
  • 임수근 (경상대학교, i-Cube Center 공학연구원)
  • Received : 2012.07.31
  • Accepted : 2012.10.19
  • Published : 2012.10.31

Abstract

In present study, the effect of heat treatment on the microstructure and mechanical properties of the gravity cast superchargers housing using A356 alloy were investigated. In order to identify the characteristics of superchagers housing casting with heat treatment, Vickers hardness test, electrical conductivity test, opical and scanning electron microscopy were performed. And also, to investigate their mechanical properties, the T6 treated superchagers housing casting in optimum heat treatment condition were carried out tensile test using UTM (Universal Testing Machine).

Keywords

References

  1. Automotive Technology and Outlook, The Korean Society of Automotive Engineers, Korea (2010) 157-173.
  2. Vision and development strategy for building environmentally friendly industrial structure, Ministry of Knowledge Economy, Korea (2003).
  3. Kim KS, Master Thesis, Gyeongsang National University, "Microstructures and mechanical properties of A356 semisolid metal fabricated by cooling plate" (2000) 1.
  4. Shim SY, Master Thesis, Gyeongsang National University, "Retrogression and reaging of extruded Al-Zn-Mg-Gu 0.1 wt%Sc Al alloy" (2004) 1.
  5. William H. Crouse and Donald L. Anglin, Automotive Mechanics, McGraw-Hill, New york (1998) 148-160.
  6. http://blog.naver.com/armada76/60113103102.
  7. Lee HI, Han YS, Kim DH and Kim YT, Understanding and Utilization of Aluminum Application Technologies, KMJ, Seoul (2006) 236-237.
  8. Song JY, Park JC and Ahn YS, J. KFS, "Effect of cast microstructure on fatigue behaviors of A356 aluminum alloy for automotive wheel", 30 (2010) 46-51.
  9. Lee KH, Kwon TN and Lee SH, J. Kor. Inst. Met&Mater., "Effect of eutectic Si particles on mechanical properties and fracture toughness of cast A356 aluminum alloy", 45 (2005) 18-29.
  10. J.Gilbert Kaufman and Elwin L.Rooy, Aluminum alloy castings; Properties, Processes and Applications, ASM international, USA (2004) 12.
  11. M.Adchi, Modification of hypoeutectic and eutectic Al-Si system casting alloys, Light metals, 34 (1984) 361. https://doi.org/10.2464/jilm.34.361
  12. An YH, Kwon HW and Ye BJ, J. KFS, "The effect of Sr on the solidification behavior of Al-Si alloy under the condition of unidirectional solidification", 15 (1995) 73.
  13. K.J Oswalt, Int. Cast Met. J. Dendrite Arm Spacing(DAS); "A Nondestructive test to evaluate tensile properties of premium quality aluminium alloy Al-Si-Mg castings", 6 (1981) 23-40.
  14. E.O.Hall, Proc. Phys. Soc., Ser. B. 643 (1951) 747-753.
  15. N.J.Petch, J.Iron and Steel Institute, "The cleavage strength of polycrystals", 173 (1953) 25-28.
  16. A.A.Griffith, Phil. Trans. Roy. Soc., "The phenomena of rupture and flow in solids", Ser A. 221 (1920) 163-198.