• Steel and Composite Structures
• /
• 제22권6호
• /
• pp.1391-1415
• /
• 2016

Limit load of pressure bearing structures was reviewed in this article. By means of the finite element analysis, limit load of pressurized cylinder with nozzle was taken as an example. Stress classification method and Elastic-plastic finite element analysis combining with limit load determination methods were used to determine limit load of cylinder with nozzle. Comparison of limit load determined by different methods, the results indicated that limit load determined by linearization method was the smallest. Limit load determined by twice elastic slope criterion was the nearest than experimental results. Elastic-plastic finite element analysis had comparably computational precision, but required time consuming. And then the requirements of computer processing and storage capacity by power system became higher and higher. Most of criteria for limit load estimation included any human factors based on a certain substantive characteristics of experimental results. The reasonable criterion should be objective and operational.

• Journal of Information Processing Systems
• /
• 제13권6호
• /
• pp.1487-1495
• /
• 2017

With increasing interests in renewables, more consumers are installing an energy storage system (ESS) in their backyards, and thus, the ESS will play a critical role in the emerging smart grid. Due to mechanical properties, however its operational dynamics must be well understood before connecting the ESS to the smart grid (and eventually to an IT system). To this end, we investigate charging and discharging processes in detail. This paper, then, proposes methods for four type tests (state of charge test, conversion efficiency test, response time test, and ramp rate test) that can assess the dynamics of the ESS. The proposed methods can capture accurate delay values of mechanical processes in the ESS, and it is expected for those values to help design real-time communication systems in the smart grid involving the ESS.

• International Journal of Internet, Broadcasting and Communication
• /
• 제13권2호
• /
• pp.120-126
• /
• 2021

The importance of mathematics is emerging to create new values and secure competitiveness in an intelligent information society based on the Fourth Industrial Revolution. This study was conducted with the aim of improving the academic performance and increasing interest of electronics majors in mathematics subjects. In order to develop learners' mathematical capabilities in major fields that utilize mathematics that electronics majors do not prefer, we have proposed a new teaching method to promote employment in mathematics-based electronics fields. In addition, to enhance learners' self-directed learning, we developed teaching methods for efficient mathematics subjects with programming languages as tools in electronics engineering and applied them to real-world teaching sites to effectively cultivate academic performance improvement of majors. Finally, we conducted a survey and statistically analyze the effectiveness of the developed teaching methods to present effective operational measures for mathematics education, an essential tool in intelligent information technology.

• International Journal of Computer Science & Network Security
• /
• 제21권4호
• /
• pp.41-46
• /
• 2021

The article studies the implementation of automation in the education process as a convenient interface of a document management system, on the one hand, which makes it easy to navigate the program, requiring from the user only a small amount of any special skills in working with electronic computers, on the other hand, it provides to the user operational information about all the data of interest to him, taking into account the access rights given to this or that information, stored in the enterprise database.

• 의료ㆍ복지 건축 : 한국의료복지건축학회 논문집
• /
• 제24권2호
• /
• pp.65-77
• /
• 2018

Purpose: By identifying the contents of the "Empty Home Utilization & Community Revitalization Model Project" which is a pilot project of empty homes back into use in Kyoto City and analyzing the characteristics of the case housing, the purpose of this study is to find out implications and suggest improvements for the domestic empty home utilization project. Methods: The scope of the survey covers seven project sites in the period from 2014 to 2016. The research method is to derive the physical and operational characteristics of the project, through the literature reviews related to bringing empty homes back into use in Kyoto City and the field survey including the space measurement and the operator interview. Results: First, in order to succeed in bringing empty homes back into use for community revitalization, the selection process of the project and the role of the public in and after supporting the project are important. Second, the important features that are required as a physical characteristic of the project are an advantage in location and an interactive space that is available at all time like a community cafe at the entrance. Third, as an operational characteristic of the empty home utilization project, it is advantageous for the local residents to participate as a business actor or an operator, and it is the continuous use of residents and outsiders by implementing an operating program that is suitable for the characteristics of the local community. Implications: The physical and operational activation factors to bring empty homes back into use need to be included as the project screening standards. And it is necessary for the public to develop the Intermediate Support Organization and to participate in linking with residents in order to carry out the empty homes utilization project effectively.

• Korean Journal of Geomatics
• /
• 제1권1호
• /
• pp.1-5
• /
• 2001

This paper presents an investigation into the operational comparison of SPOT triangulation to build GCP library by analytical plotter and DPW (digital photogrammetric workstation). GCP database derived from current SPOT images can be used to other image sensors of satellite, if any reasons, such as lack of topographic maps or GCPs. But, general formulation of a photogrammetric process for GCP measurement has to take care of the scene interpretation problem. There are two classical methods depending on whether an analytical plotter or DPW is being used. Regardless of the method used, the measurement of GCPs is the weakest point in the automation of photogrammetric orientation procedures. To make an operational comparison, five models of SPOT panchromatic images (level 1A) and negative films (level 1AP) were used. Ten images and film products were used for the five GRS areas. Photogrammetric measurements were carried out in a manual mode on P2 analytical plotter and LH Systems DPW770. We presented an approach for exterior orientation of SPOT images, which was based on the use of approximately eighty national geodetic control points as GCPs which located on the summit of the mountain. Using sixteen well-spaced geodetic control points per model, all segments consistently showed RMS error just below the pixel at the check points in analytical instrument. In the case of DPW, half of the ground controls could not found or distinguished exactly when we displayed the image on the computer monitor. Experiment results showed that the RMS errors with DPW test was fluctuated case by case. And the magnitudes of the errors were reached more than three pixels due to the lack of image interpretation capability. It showed that the geodetic control points is not suitable as the ground control points in DPW for modeling the SPOT image.

• The Journal of Asian Finance, Economics and Business
• /
• 제7권10호
• /
• pp.183-192
• /
• 2020

The purpose of this paper is to investigate the determinants of the Operational Self-Sustainability (OSS) of Vietnamese microfinance institutions (MFIs). This research uses both qualitative and quantitative research methods: (i) qualitative research was via in-depth interviews with ten microfinance practitioners, policymakers and researchers; (ii) quantitative research was conducted by using panel data of 34 MFIs in the period 2011-2015 with binary logistics and OLS regressions. Results are as follows: (i) MFIs' OSS in Vietnam are mainly determined by five key factors: portfolio at risk (PAR>30), capital structure, gross loan portfolio, scope of activities and legal form; (ii) OSS are most affected by legal status (social organizations have better OSS than formal MFIs or programs/projects), location (MFIs focus in one province have higher OSS than working nationwide or just in one district), capital structure (MFIs with more equity proportion have higher OSS); (iii) surprisingly, average loan size per borrower and age of MFIs do not have statistically significant correlation with OSS. The key recommendations are: (i) MFIs should focus on its professionality and increase its equity; (ii) related stakeholders such as State Bank of Vietnam should promote the enabling ecosystem for microfinance development to enhance poverty reduction and economic development.

• 대한간호학회지
• /
• 제50권4호
• /
• pp.583-598
• /
• 2020

Purpose: This study was to investigate the operational status of the midwifery birthing centers (MBCs) and midwives' job status (Phase 1) and to develop midwifery practice guidelines (MPG) (Phase 2) in Korea. Methods: In the first phase, the subjects were 15 midwives who operated 11 of 14 MBCs that were opened as of August 2018. The questionnaire consisted of items to measure the operational status of the MBC and midwives' job status. In the second phase, the MPG was developed from literature review, interviews with five midwives opening their MBCs, surveys with 74 midwives, and a validity evaluation conducted by seven experts. Results: The distribution of operating MBCs was five in Gyunggi-do, two each in Seoul and Incheon, one each in Busan, Chungcheongbuk-do, Gyeongsangbuk-do, Gyeongsangnam-do and Jeju-do. The mean age of midwives was 54.3 and all were female. In 2017, a total of 762 births including 81 homebirths were performed by midwives. The job performance was highest in the order of neonatal care 3.81, childbirth care 3.56, and postpartal care 3.53, respectively. The MPG included seven areas of prenatal care, childbirth care, postpartal care, neonatal care, primary health care, law/ethics, and administration, with 56 tasks and 166 task elements. Conclusion: This study provides the valid basic data for the operational status of the MBC and the midwives' job status. The MPG describes the midwife's job and may be used as basic data for preparing policies for the development of midwifery practice in Korea.

• Journal of Radiation Protection and Research
• /
• 제42권3호
• /
• pp.166-175
• /
• 2017

Background: This study presents food ingestion standards for radioactivity that can be applied in nuclear emergency exposure situations, and discusses the validity of the current domestic standards. Materials and Methods: This study derived food ingestion standards for radiocesium and radioiodine using domestic food intake rates and intervention levels, which serve as a basis for determining the necessity of public protective actions, and then compared them with the existing guidelines. Operational intervention levels were also derived using domestic food intake rates, and were compared with those of the International Atomic Energy Agency. Results and Discussion: The derived activity concentrations for food ingestion standards of radiocesium for infants were higher than those in the Act on Physical Protection and Radiological Emergency (APPRE) for all food categories, while for adults, the derived activity concentrations for drinking water and milk appeared to be slightly lower. The derived activity concentrations for vegetables, fruits, and grains were greater than those in the guidelines of the APPRE, while the derived activity concentrations for meat and seafood were similar to those in the APPRE. The derived activity concentrations for radioiodine were greater than both domestic and global standards. The calculated operational intervention levels (OILs) based on domestic food intake rates were greater than the IAEA's default OIL6 values for most radionuclides, except for a few ${\alpha}$-radionuclides. Conclusion: The current domestic guidelines turned out to be conservative overall, compared to the present results that were calculated using domestic food intake rates. It is recommended that the domestic guidelines should be revised and complemented transparently through an in-depth review by stakeholders on a solid scientific basis.

• 한국자동차공학회논문집
• /
• 제23권1호
• /
• pp.65-73
• /
• 2015

The ride quality has become a key component of not only design but car selling as the technology developed and the requirement of passengers grew up. Thus car industry invests lots of time and cost for the higher ride quality. The evaluation of the ride quality mainly is expressed by subjective element that drivers felt. In this paper, instead of the original transfer path analysis method, relatively new methods such as OPAX(Operational path analysis with eXogeneous inputs) and OTPA(operational transfer path analysis) are used for analyzing the main hindrance element of ride quality. With those new method, contribution rate of all paths that the vibration propagate along analyzed after driving test on the roads having different characteristic. The comprehensive hindrance elements of ride quality are deduced from the contribution rate and the improve experiment by changing one of hindrance elements for higher ride quality.