• Journal of the Korea Institute of Information Security & Cryptology
• /
• v.29 no.4
• /
• pp.867-875
• /
• 2019

Security awareness and training are becoming more important as cyber security incidents tend to increase in industrial control systems, including nuclear power plants. For effective cyber security awareness and training for the personnel who manage and operate the target facility, a TEST-BED is required that can analyze the impact of cyber attacks from the sensor level to the operation status of the nuclear power plant. In this paper, we have developed an HIL system for nuclear power plant cyber security training. It includes nuclear power plant status simulations and specific system status simulation together with physical devices. This research result will be used for the specialized cyber security training program for Korean nuclear facilities.

• Journal of the Korean Society for Aeronautical & Space Sciences
• /
• v.47 no.2
• /
• pp.130-142
• /
• 2019

For a preemptive strike against a Time Critical Target(TCT), such as Transporter-Erector-Launcher(TEL), the detection capability of capturing launch signals in the Area of Interest(AoI) is important. In this study, the characteristics of the revisit time and the response time of 6~48 small SAR constellation satellites were analyzed. In particular, the revisit time was analyzed for all regions of North Korea and specific regions, and the response time was classified into [Scenario 1] to identify fixed targets and [Scenario 2] to detect and identify moving targets. In particular, the response time analysis for the TCT detection mission operation in [scenario 2] was performed through optimization analysis of observation cumulative coverage for a specific area. Finally, the configuration of constellation satellites for optimal performance of the detection mission was estimated.

• Journal of Climate Change Research
• /
• v.8 no.4
• /
• pp.313-327
• /
• 2017

Korea has introduced Korea Emissions In 2015, the United Nations Conference on Climate Change (COP21) was held in Paris. The Paris Agreement indicates that all nations are in charge of mitigating climate change. Prior to COP21, 197 Parties submitted the Nationally Determined Contributions (NDCs), which are greenhouse gas reduction targets. On June 30, 2015, Korea also submitted an NDC target of 37% reduction compared to BAU in 2030. However, Korea's NDC was evaluated as "Inadequate" by the Climate Action Tracker (CAT). In addition, the domestic environmental group expressed a negative opinion as well. In view of this situation, it is necessary to conduct an objective assessment of quantitative analysis of NDC goals in Korea. The goal of this study is to evaluate NDC of Korea by comparing with those of OECD member countries. For comparative analysis, data such as population, GDP, primary energy supply affecting GHG emissions were obtained from the OECD homepage. The results indicate that emission reduction goal of 37% of Korea was $4^{th}$ highest goal among OECD member countries. If Korea achieves the emission reduction goal, the greenhouse gas emissions per capita in 2030 are $10^{th}$among OECD member countries. The greenhouse gas emissions per GDP are $13^{th}$, and emissions per TOE are $9^{th}$ among OECD member countries. The results show that greenhouse gas intensity of Korea is relatively high among OECD member countries. Therefore, it is needed to continuously endeavor to reduce greenhouse gas emissions to mitigate the global climate change. This study can be further used as a fundamental document to establish the future greenhouse reduction policy in Korea.

• International Area Studies Review
• /
• v.18 no.3
• /
• pp.3-21
• /
• 2014

The OECD DAC has recommended the member countries to raise the ODA budget by 0.7% of GNI. Most of DAC's members, howver, have not reached at the target level, mainly due to global economic crisis, with some exceptions in Northern Europe countries. Korea has increased the ODA budget allocation dramatically, but she could not still meet even the level 0.3%, which is the average level of DAC countries. In terms of national budget operation, DAC country groups are classified as the international norm type and the self-economic dependence type. And then, this study analyzes the time trends of the ODA budget in Korea, comparing with DAC's members on the economic scale. By forecasting Korean ODA budgets by country-type classifications, the optimal size of Korean government's ODA budget is proposed and discussed.

• Journal of Urban Science
• /
• v.7 no.2
• /
• pp.53-60
• /
• 2018

Digital Twin is a technology that creates a photocopy of real-world objects on a computer and analyzes the past and present operational status by fusing the structure, context, and operation of various physical systems with property information, and predicts the future society's countermeasures. In particular, 3D rendering technology (UAS, LiDAR, GNSS, etc.) is a core technology in digital twin. so, the research and application are actively performed in the industry in recent years. However, UAS (Unmanned Aerial System) and LiDAR (Light Detection And Ranging) have to be solved by compensating blind spot which is not reconstructed according to the object shape. In addition, the terrestrial LiDAR can acquire the point cloud of the object more precisely and quickly at a short distance, but a blind spot is generated at the upper part of the object, thereby imposing restrictions on the forward digital twin modeling. The UAS is capable of modeling a specific range of objects with high accuracy by using high resolution images at low altitudes, and has the advantage of generating a high density point group based on SfM (Structure-from-Motion) image analysis technology. However, It is relatively far from the target LiDAR than the terrestrial LiDAR, and it takes time to analyze the image. In particular, it is necessary to reduce the accuracy of the side part and compensate the blind spot. By re-optimizing it after fusion with UAS and Terrestrial LiDAR, the residual error of each modeling method was compensated and the mutual correction result was obtained. The accuracy of fusion-based 3D model is less than 1cm and it is expected to be useful for digital twin construction.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.19 no.12
• /
• pp.41-46
• /
• 2018

In this research, numerical analysis was performed to determine the effects of hydrogen on biogas combustion for homogeneous charged compression ignition (HCCI) engines. The target engine specifications were a 2300cc displacement volume, 13:1 compression ratio, 15kW of electricity, and 1.2 bar boost pressure. The engine speed was fixed to 1800rpm. By varying the excess air ratio and hydrogen contents, the cylinder pressure, nitric oxide, and carbon dioxide were measured as a function of the hydrogen contents. According to preliminary studies related to the reaction mechanism for methane combustion and oxidation, a GRI 3.0 mechanism as the base mechanism was selected for HCCI combustion calculations describing the detailed reaction mechanism. By adding hydrogen, NO was increased while $CO_2$ was decreased. The cylinder pressure was also increased, having advanced timing for the maximum cylinder pressure and pressure rise region. Furthermore, lean operation limits were extended by adding hydrogen to the HCCI engine.

• Journal of Korean Society on Water Environment
• /
• v.35 no.5
• /
• pp.409-417
• /
• 2019

In this study, a $480m^3/day$ pilot device was constructed through laboratory experiments based on the Ministry of Environment manual. The purpose of this study was to analyze the characteristics of CSO treatment and backwashing characteristics by applying the pilot device to the field. The purpose of this study was to acquire the basic data necessary for the design and operation management of the real scale filtration type non-point pollution control system. The filtration was conducted while maintaining the linear velocity of 20m/hour. The CSO treatment efficiencies of the pilot devices were 0.4-76.1%(mean 49.0 %), SS 51.4-91.6%(mean 77.8%), COD 22.2-59.4% (mean 38.3%) and TP 14.5-52.6%(mean 38.1%),respectively. The correlation coefficient between SS and the turbidity of influent water was 0.90, higher than that of CSO. To operate the treatment system effectively, the turbidity can be easily measured in real time as the monitoring item is the most appropriate because SS is the main target substance of the non-point source. As a result of analyzing the adsorbent treatment characteristics of PP filter material applied to this pilot device, the average particle diameter range of influent was $4.6-40.1{\mu}m$(mean $21.2{\mu}m$) and the treated water was $0.9-24.5{\mu}m$(mean $6.4{\mu}m$), respectively. Particles of approximately 10m or less are leached out, and so it is necessary to compensate for the raw water containing micro particulate matter.

• Journal of the Architectural Institute of Korea Planning & Design
• /
• v.34 no.12
• /
• pp.3-12
• /
• 2018

The purpose of this study is to draw implications for revitalizing public-private partnership system that can reduce the financial burden of the government and utilize the creative know-how of the private sector by analyzing the cases of public building construction projects by public-private partnership method in Japan. In this study, first of all, I looked at the current state of public-private partnership policy in Japan and then selected 8 representative projects as an analysis target. Next, in order to grasp the specific situation that is aimed at securing publicity and revitalizing private participation, I analyzed the role sharing between public and private sectors in the maintenance and management of public buildings, and examined the conditions for private revenue facilities. As a result of the analysis, the following implications were drawn. First, the methods of public building construction by public-private partnership in Japan are largely divided into BTO method based on the PFI method, and the method of installing public facilities and private revenue facilities based on the term leasehold rights system. Second, measures were taken to mitigate the burden of the state and local governments in establishing public facilities. Third, the public has delegated to the private sector actively about the role that the private sector can play, expanding the role of private sector widely from design to operation in the public building construction projects. Fourth, in order to actively participate in private sectors and promote regional revitalization, private profit-making projects are widely accepted, but consideration has been given to guarantee a certain level of publicity.

• Journal of the Architectural Institute of Korea Planning & Design
• /
• v.35 no.3
• /
• pp.67-77
• /
• 2019

The purpose of this study is to introduce a town management system that utilizes private sectors and public space resources in urban management area. In this study, we are studying 7 town management districts in Japan which have been establishing diverse management systems that are propelled by the private sectors and private fund. We analyzed qualitative characteristics of 7 town management districts by surveying the operating status of organization, financial management and activities. Through the analysis, we clarified their characteristics that are related to establishing background. Also, we suggested conclusions of the study as follows: First of all, it is important to develop a town management method that takes into account the characteristics of the target district in order to overcome the limitation of applying uniform method and increase sustainability and efficiency of privately-led urban management. Second, marketing and promotion are critical strategies in town management since they are satisfying both private and public benefits. The high rate of reinvestment in marketing and promotions shows efforts to maintain the asset value of the private sector and continue to revitalize the city. Finally, in order to carry out urban management with private initiative, it is necessary to establish a working organization capable of realizing the operational direction of the steering committee to secure the executive power.

• Journal of the Korean Physical Society
• /
• v.73 no.12
• /
• pp.1821-1826
• /
• 2018

Uniformity is a key feature of state-of-the-art infrared focal planed array (IRFPA) and infrared imaging system. Unlike traditional infrared telescope facility, a ground-based infrared radiant characteristics measurement system with an IRFPA not only provides a series of high signal-to-noise ratio (SNR) infrared image but also ensures the validity of radiant measurement data. Normally, a long integration time tends to produce a high SNR infrared image for infrared radiant characteristics radiometry system. In view of the variability of and uncertainty in the measured target's energy, the operation of switching the integration time and attenuators usually guarantees the guality of the infrared radiation measurement data obtainted during the infrared radiant characteristics radiometry process. Non-uniformity correction (NUC) coefficients in a given integration time are often applied to a specified integration time. If the integration time is switched, the SNR for the infrared imaging will degenerate rapidly. Considering the effect of the SNR for the infrared image and the infrared radiant characteristics radiometry above, we propose a-wide-dynamic-range NUC algorithm. In addition, this essasy derives and establishes the mathematical modal of the algorithm in detail. Then, we conduct verification experiments by using a ground-based MWIR(Mid-wave Infared) radiant characteristics radiometry system with an Ø400 mm aperture. The experimental results obtained using the proposed algorithm and the traditional algorithm for different integration time are compared. The statistical data shows that the average non-uniformity for the proposed algorithm decreased from 0.77% to 0.21% at 2.5 ms and from 1.33% to 0.26% at 5.5 ms. The testing results demonstrate that the usage of suggested algorithm can improve infrared imaging quality and radiation measurement accuracy.