• Journal of the Korea Institute of Military Science and Technology
• /
• v.20 no.3
• /
• pp.352-361
• /
• 2017

This paper proposes a design and fabrication of the test equipment that is implemented as a part of the airborne tracking radar inspection under the environment of indoor simulation. This test equipment provides controlling the operation status of airborne tracking radar and replicating the velocity and range information of target by generating a variety of target signal. This is mainly composed of radar operation controller, target signal generator, horn antenna driving devices. Radar operation controller is able to perform the controlling of radar operation mode and monitoring in real time by serial communication. Target signal generator is generated doppler signal and range delayed signal using virtual target of RF-band. Horn antenna driving devices perform a role of target simulating exercise. In the end, the performance is demonstrated using experiment results of test equipment for airborne tracking radar.

• Journal of the Korean Society of Safety
• /
• v.24 no.3
• /
• pp.65-70
• /
• 2009

In-vehicle route guidance information(RGI) systems have been developed with the advancement of the information and communication technologies. However, the RGI is provided by a pre-determined option, drivers occasionally pass the target intersection owing to non- or late- recognizing it. The purpose of this experiment is to examine the position of driver's tum signal operation and intersection recognition approaching at the target intersection which is difficult to identify as a preliminary research on developing the additional RGI connecting with the tum signal control. The field experiment was conducted to measure distances of the turn signal operation and intersection recognition from the target intersection according to driving lanes and landmarks at adjacent intersection. And, glance behavior to the car navigation display was evaluated by using an eye camera. The results indicate that drivers operate the turn signal after confirming a landmark in the case of the intersection with it. However, most case of driving, drivers operate the tum signal at 40 to 50m before coming to the target. To provide the additional RGI, when drivers do not operate the tum signal approaching at the target intersection based on the results, is expected to improve the traffic safety and the comfort for drivers.

• Journal of the Korea Safety Management & Science
• /
• v.13 no.4
• /
• pp.193-199
• /
• 2011

In the past annual recycling obligation rate calculation of Extended Producer Responsibility (EPR) system, it was difficult to operate the system efficiently, because responsible producers passively participated in the scheme only bent on achieving annual obligation without long-term plan. Thus, a new scheme of long-term recycling obligation rate began to be established every five year from 2008 in order to give the basis for the notice of annual specific operation standard and recycling obligation, thereby helping responsible producers to make a preparation with a plan and giving expectation of active operation of the scheme. However, in the operation of long-term recycling target program, while the development of prediction models and the evaluation for existing items has been conducted in various ways, applications for a new target items and the evaluation are quite insufficient. Therefore, in this study, problems in implementing long-term recycling goal of new target items will be examined, and more objective and rational long-term recycling rate calculation and the operation standard will be proposed. Thus, the long-term recycling target will play a role as a pacemaker to steadily improve the recycling performance of target items, and responsible producers will be expected to increase the achievement with the realistic capacity.

• Journal of Korea Society of Industrial Information Systems
• /
• v.18 no.4
• /
• pp.53-60
• /
• 2013

We propose a method for improving detection speed of small target detection system using SAD algorithm. First, the proposed method deletes clutters using a median filter. Next, it does closing and opening operation using various size of structure elements, and extracts candidate pixels for a target with subtraction operation between the results of closing and opening operation. It finally detects a small target using a gaussian distance function from the candidate pixels. To improve detection speed, it detects a target performing SAD algorithm only for the predicted target areas for next every 7 frames. The proposed method not only enables a real time process because it considers only predicted area but also shows detecting rate of 97%.

• The Transactions of The Korean Institute of Electrical Engineers
• /
• v.58 no.4
• /
• pp.671-678
• /
• 2009

This paper presents target operation voltage guidelines of each voltage control area considering both voltage stability and economical efficiency in real power system. EMS(Energy Management System) data, Real-time simulator, shows not only voltage level but lots of information about real power system. Also this paper performs optimal power flow calculation of three objective functions to propose the best target operation voltage. objective function of interchange power flow maximum and active power loss minimization stand for economical efficiency index and reactive power reserve maximum objective unction represents stability index. Then through simulation result using optimazation technique, the most effective objective function is chosen. To sum up, this paper divides voltage control area into twelve considering electric distance characteristics and estimate or voltage level by the passage of time of EMS peak data. And through optimization technique target operation voltage of each voltage control area is estimated and compare heir result. Then it is proposed that the best scenario to keep up voltage stability and maximize economical efficiency in real power system.

• Journal of Korea Society of Industrial Information Systems
• /
• v.17 no.4
• /
• pp.61-70
• /
• 2012

We propose a method that finds candidate targets based on morphology and detects a small target from them using modified gaussian distance function. The existing small target detection methods use predictive filters or morphology. The methods using predictive filters take long to approach least errors. The methods using morphology are weak at clutters and need to consider size of a small target when selecting size of structure elements. We propose a robust method for small target detection to complete the existing methods. First, the proposed method deletes clutters using a median filter. Next, it does closing and opening operation using various size of structure elements, and figures target candidate pixels with subtraction operation between the results of closing and opening operation. It detects an exact small target using a gaussian distance function from the candidates target areas. The proposed method is less sensitive to clutters, and shows a detection rate of 98%.

• Journal of the Korea Institute of Military Science and Technology
• /
• v.23 no.3
• /
• pp.204-212
• /
• 2020

For general target tracking works by receiving a set of measurements from sensor. However, if the SNR(Signal to Noise Ratio) is low due to small RCS(Radar Cross Section), caused by remote small targets, the target's information can be lost during signal processing. TBD(Track Before Detect) is an algorithm that performs target tracking without threshold for detection. That is, all sensor data is sent to the tracking system, which prevents the loss of the target's information by thresholding the signal intensity. On the other hand, using all sensor data inevitably leads to computational problems that can severely limit the application. In this paper, we propose an iterative Joint Integrated Probabilistic Data Association as a practical target tracking technique suitable for a low SNR multi-target environment with real time operation capability, and verify its performance through simulation studies.

• 한국전산유체공학회:학술대회논문집
• /
• 2004.03a
• /
• pp.208-213
• /
• 2004

The HANARO, multi-purpose research reactor, 30 MWth open-tank-in- pool type, is under normal operation since it reached the initial critical in February 1995. The HANARO is planning to produce a fission moly-99 of radio isotopes, a mother nuclide of Tc-99m, a medical isotope and is under developing a target handling tool for loading and unloading it in a circular flow tube (OR-5). A guide tube is extended from the reactor core to the top of the reactor chimney for easily un/loading a target under the reactor normal operation. But active coolant through the core can be quickly raised up to the top of the chimney through the guide tube by jet flow. This paper is described an analytical analysis to calculate the hole size of a orifice inserted in the circular irradiation hole and to study the flow characteristics through the guide tube under reactor normal operation and loading the target. As results, the results show that the hole size of orifice was 31 mm of the inner diameter to suppress the guide tube jet flow and the coolant safely cooled the target of fission moly after inserting the orifice to the flow tube.

• 한국전산유체공학회:학술대회논문집
• /
• 2004.03a
• /
• pp.214-219
• /
• 2004

The HANARO, a multi-purpose research reactor of 30 MWth, open-tank-in-pool type, has been under normal operation since its initial criticality in February, 1995. The HANARO is composed of inlet plenum, grid plate, core channel with flow tubes and chimney. The reactor core channel is located at about twelve m (12 m) depth of the reactor pool and cold by the upward flow that the coolant enters the lower inlet of the plenum, rises up through the grid plate and the core channel and exit through the outlet of chimney. A guide tube is extended from the reactor core to the top of the reactor chimney for easily un/loading a target under the reactor normal operation. But active coolant through the core can be Quickly raised up to the top of the chimney through the guide tube by jet flow. This paper is described an analytical analysis to study the flow behavior through the guide tube under reactor normal operation and unloading the target. As results, it was conformed through the analysis results that the flow rate, about fourteen kilogram per second (14 kg/s) suppressed the guide tube jet and met the design cooling flow rate in a circular flow tube, and that the fission moly target cooling flow rate met the minimum flow rate to cool the target.

• Journal of radiological science and technology
• /
• v.39 no.4
• /
• pp.643-649
• /
• 2016

When a cyclotron produces $^{18}F^-$, accelerated protons interact with metal parts of the cyclotron machine and induces radioactivity. Especially, the target window and chamber of the target assembly are the main parts where long-lived radionuclides are generated as they are incident by direct beams. It is of great importance to identify radionuclides induced in the target assembly for the safe operation and maintenance of a cyclotron facility. In this study, we analyzed major radionuclides generated in the target assembly by an operation of the Cyclotron 18/9 machine and measured dose rates after the operation to establish the radiation safety guideline for operators and maintenance personnel of the machine. Gamma spectroscopy with HPGe was performed on samples from the target chamber and Havar foil target window to identify the radionuclides generated during the operation for production of $^{18}F^-$- isotope and their specific activity. Also, the dose rates from the target were measured as a function of time after an operation. These data will help improve radiological safety of operating the cyclotron facilities.