• Proceedings of the Korean Institute of Building Construction Conference
• /
• 2020.11a
• /
• pp.119-120
• /
• 2020

In order to establish an evaluation method that can quantitatively evaluate the fire safety of existing buildings in Korea, a stochastic approach is needed to consider the extent of damage in the event of actual fire, along with the operation and installation of facilities. Accordingly, as a basic study for the establishment of fire safety assessment methods for buildings, this study aims to analyze the results of safety inspection and the degree of damage caused by the operation of fire doors and fire shutters in order to derive the reliability of fire doors and fire shutters. As a result, the results of inspection of fire shutters and fire doors and the results of operation using fire statisticians are as follows. As a result of the inspection, the positive rate of fire doors was about 82% and 98% of normal operation was derived from the fire investigation.

• IE interfaces
• /
• v.11 no.3
• /
• pp.115-128
• /
• 1998

This paper presents a development of operation scheduling and reactive operation scheduling system for hull fabrication. The methodology for implementing operation scheduling system is HHGA(Hierarchical Hybrid Genetic Algorithm) which exploits both the global perspective of the genetic algorithm and the rapid convergence of the heuristic search for operation scheduling. The methodology for the reactive operation scheduling is the revised HHGA which consists of manual schedule editor for occurrence of exceptional events and the revised scheduling method used in operation scheduling. As the results of experiment, it has been confirmed that HHGA is able to search good operation scheduling within reasonable time, and the revised HHGA is able to search load-balanced reactive operation scheduling with minimum changes of initial operation schedule within short period of time.

• Research in Mathematical Education
• /
• v.16 no.4
• /
• pp.217-232
• /
• 2012

While many studies on early algebra have been conducted, there have been only a few studies on the operation sense as the fundamental element of algebraic thinking, especially the fraction operation sense. This study explored the dimensions of fraction operation sense and then investigated students' fraction operation sense. A total of 183 of sixth graders were surveyed and 5 students who showed high operation sense were clinically interviewed in order to analyze their algebraic thinking in detail. The results showed that students had a tendency to use direct calculation or employ inappropriate operation sense rather than to use the structure of operation or the relation between operations on the basis of algebraic thinking. This study implies that explicit instruction on early algebra is necessary from the elementary school years.

• Journal of Biosystems Engineering
• /
• v.43 no.2
• /
• pp.83-93
• /
• 2018

Purpose: This study derived the consumed power and load characteristics of a tillage operation performed in an upland field located in Seomyeon, Chuncheon, Rep. Korea, where potatoes and cabbages were cultivated in two crops. Methods: A plow and rotavator were mounted on a tractor with 23.7 kW of rated power to perform the tillage operation. The work conditions were determined, considering the actual working speed of the tillage operation performed by the local farmers. The power consumption of the rear axle, engine, and power take-off (PTO), PTO torque, and tractive force were measured under each work condition. The consumed power and load characteristics were analyzed using their average values. Results: The rotary-tillage operation consumed more engine power than the plow operation for the same tractor-transmission gear condition. The PTO in the rotary-tillage operation and the rear axle in the plow operation consumed the most power. The power consumption of the engine and the PTO for the rotary-tillage operation tended to increase as the transmission gears of the tractor and the PTO became higher. In contrast, the rear-axle power consumption was insignificant. In addition, the PTO torque tended to rise as the tilling pitch increased. For the plow operation, the drawbar power and the rear axle power accounted for 68-90% of the engine power. The engine and rear axle power, drawbar power, and tractive force tended to rise as the working speed increased. Conclusions: The power consumption and load characteristics differed for the plow and rotary-tillage operations. They may also differ depending on the soil conditions. Therefore, the power consumption and load characteristics in various work environments and regions should be analyzed, and reflected in the design of tractors and working implements. The results derived from this study can be used as a reference for such designs.

• Geomechanics and Engineering
• /
• v.30 no.3
• /
• pp.273-280
• /
• 2022

A certain amount of random vibration excitation to subway track is caused by subway operation. This excitation is transmitted through track foundation, tunnel, soil medium, and ground building to the ground and ground structure, causing vibration. The vibration affects ground building. In this study, the results of ANSYS numerical simulation was used to establish back-propagation (BP) neural network model. Moreover, a back-propagation neural network model consisting of five input neurons, one hidden layer, 11 hidden-layer neurons, and three output neurons was used to analyze and calculate the vertical Z-vibration level of New Capital's ground buildings of Qingdao Metro phase I Project (Line M3). The Z-vibration level under different working conditions was calculated from monolithic roadbed, steel-spring floating slab roadbed, and rubber-pad floating slab roadbed under the working condition of center point of 0-100 m. The steel-spring floating slab roadbed was used in the New Capital area to monitor the subway operation vibration in this area. Comparing the monitoring and prediction results, it was found that the prediction results have a good linear relationship with lower error. The research results have good reference and guiding significance for predicting vibration caused by subway operation.

• Journal of Veterinary Clinics
• /
• v.4 no.2
• /
• pp.483-490
• /
• 1987

In order to study the compensatory renal function in 6 Korean black goats with 75% reduction in renal mass, some blood chemical values were determined and pathological changes were examined. The results were as follows : 1. BUN level increased significantly from post-operation day 1 through day 30(p<0.01) compared with pre-operation level. Serum creatinine level increased significantly from post-operation day 1 through day 26(p <0.01 ) compared with pre-operation level and remained higher than pre-operation level at day 30(p <0. 05). 2. Serum calcium level increased significantly from post-operation day 4 through day 7(p<0.01) compared with pre-operation level and remained higher than pre-operation level from post-operation day 8 through day 14(p<0.05). Serum phosphorus level decreased at postoperation day 4,5(p<0.05 ) compared with pre-operation level. 3. RBC counts decreased at post-operation day 2. 3, 5. to 30(p<0.05), PCV decreased at post-operation day 2, 3, 5, 7, to 30(p<0.05), hemoglobin level decreased at post-operation day 2, 8, 14, to 30(p<0.05), compared with pre - operation levels, respectively. 4. The ventral half of the right kidney was infarcted by the ligation of ventral branch of right renal artery.

• Journal of the Korea Society for Simulation
• /
• v.12 no.3
• /
• pp.21-29
• /
• 2003

The operation rules to remarshaling works in yard is very important in automated container terminal (ACT). However, the decision rules for conventional container terminals have some restrictions to be applied to ACT whose block layout Is vortical for berth. The objective of this study is to propose the efficient operations rules for remarshaling works of automated transfer crane (ATC) in ACTs. Then, the various operation rules are simulated to verify the proposed operation rules. The results of the simulation study on various rules are provided and discussed.

• Proceedings of the KIPE Conference
• /
• 2004.07a
• /
• pp.402-405
• /
• 2004

In this paper, the parallel operation of the IGBT and power stack for easy capacity enlargement series in the medium power capacity inverter system of the 660V voltage class is described. The parallel operation of the IGBT and power stack for 1.5MVA medium power inverter system's design is applied. The results of the parallel operation are described in this paper. The designed stack capacity for parallel operation is 800kVA class. For 1.5MVA inverter system, the 800kVA stack is applied with 2 parallel configurations. The 800kVA stack is designed with 3 parallel configurations of the IGBT Module. In this paper, the feasibility for easy capacity enlargement series in the medium power inverter by applying the parallel operation of the IGBT and power stack is verified. The experimental results show the good characteristics for the parallel operation of the IGBT and power stack.

• Archives of Reconstructive Microsurgery
• /
• v.19 no.2
• /
• pp.101-107
• /
• 2010

Purpose: The free flap has been widely used as one stage reconstructive procedure the skin and soft tissue defect. The secondary adjuvant operations are often needed for better results as functional and aesthetic compartment. Therefore, we focus on the secondary adjuvant surgeries for better outcome after free flaps. Methods: One hundred ninety six consecutive patients underwent free flaps between January, 2002 and February 2009. The cases constituted ninety two male patients and one hundred four female patients. For the patients who got free flap operation, we investigated secondary adjuvant operations what type of procedures was applied according to the reconstructed sites. All clinical data were based on the patient's medical records. Results: Of one hundred ninety six patients in whom free flap was performed, a total of eighty two patients(41.8%) received the secondary adjuvant operation. Because of many patients got multiple secondary adjuvant operations, the number of the secondary adjuvant operation become one hundred fifty five cases. The most common used procedure is a liposuction, and the second one is a lipoinjection. Conclusion: As the secondary adjuvant operation like a liposuction, lipoinjection, etc., satisfaction for operative result was increased in the aspects of function and aesthetics. So the secondary adjuvant operation in free flap surgeries contributed in raising the patient's quality of life.

• The Bulletin of The Korean Astronomical Society
• /
• v.40 no.2
• /
• pp.60.1-60.1
• /
• 2015

We present the current operation status of StarDB web services by showing its user access statistics. The StarDB web services started its operation in late November, allowing world-wide users to access results of new variability analysis for Northern Sky Variability Survey light curves. New analysis results of various time-series data have been added to the StarDB services. Importantly, our services have supported a simple cone search, which is an internationally well-defined catalog search interface in the international Virtual Observatory systems. We have collected user access statistics such as how users find our analysis data since its operation in later November. We expect our analysis of the StarDB operation to help Korean community members who plan and operate their own web services preparing for a future era of big survey data.