• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.17 no.2
• /
• pp.560-569
• /
• 2016

Purpose The purpose of this study was not only to explore the factors associated with the survival of OHCA(Out-of-hospital Cardiac Arrest), but to provide ideas for improving the operation of emergency medical system in Korea. Method 90,734 OHCAs(Out-of-hospital Cardiac Arrest) with a cardiac etiology, who had been transported by 119 EMS ambulances for seven years from 2006 to 2012 in Korea, were analyzed. The data had a multilevel structure in that patient's survival in the same region is interrelated, so two-level (patient-region) logistic regression analysis was applied to adjust this correlation. Results The adjusted OR in group who were given CPR(Cardiopulmonary Resuscitation) by a bystander were 1.40 for survival to discharge. In addition, the adjusted OR in the group with an implementation of AED (automated external defibrillator) before arriving in hospital was 2.98 for survival to discharge. we categorized some continuous variables (number of emergency physician, OHCAs volume fo hospital, area deprivation level) into five quintiles. The adjusted OR in the number of emergency physician compared with Q1(lowest) was 1.29(Q2), 2.89(Q3), 3.39(Q4), 4.07(Q5), respectively. the adjusted OR in OHCAs volume of each hospital compared with Q1(lowest) was 2.06(Q2), 3.06(Q3), 3.46(Q4), 4.36(Q5), respectively. Lastly, the adjusted OR in deprivation level compared with Q1(least deprived area) was 0.72(Q4), 0.64(Q5) so that the adjusted OR of survival to discharge tended to decrease in more deprived districts. Conclusion The survival to discharge was better significantly in group given CPR by a bystander and with the implementation of AED before arriving in hospital. The survival to discharge tended to be significantly better in hospitals with a larger number of emergency physicians and higher volume of OHCAs in less deprived districts.

• Journal of the Korean Recycled Construction Resources Institute
• /
• v.4 no.4
• /
• pp.117-124
• /
• 2009

The purpose of the study was to improve quality of high volume fly ash concrete. The study evaluated on the possibility of early quality improvement of high volume fly ash concrete with early strength gain admixture ('GA' below) developed by the preceding research. The study regarded applying naphthalene admixture ('NA' below) to mix proportion substituting FA 15 % to be plain. In the event of substituting FA 20, 25 and 30 %, the study compared engineering properties of concrete with plain by applying GA. Because of features of fresh concrete, fluidity falls down when GA is applied. Therefore, its use amount shall be increased. Only, in W/B 60 %, it was beneficial since slump loss was reduced about 35~70 mm than plain. The study could see that AE use should be increased proportionally since air content was reduced by coming from AE absorption operation of unburned coal content included in FA according to an increase in the amount of FA use. Reduction effect of bleeding could be anticipated since the amount of bleeding appeared at least in FA 20 %. Because of hardened concrete, time of setting appeared in the same level as plain when GA was applied. Therefore, it is judged that delay of setting can be reduced. In compressive strength, the study could check the same strength development as plain when GA was applied, having nothing to do with W/B and curing temperature. However, it is thought that we shall pay attention to GA use in the event of FA 30 % substitution. Freezing and melting resistance had less early value than plain. However, it is judged that there will be no problem of frost resistance since there is no a large difference between freezing and melting resistance and plain in overall. In accelerated neutralization, it was analyzed that a problem of weakening in neutralization appointed as a demerit when FA was applied in mass in proportion with GA use could be settled to some extent.

• Cartoon and Animation Studies
• /
• s.45
• /
• pp.197-214
• /
• 2016

Augmented Reality, virtual reality in recently attracted attention throughout the world. and Mix them mixed reality etc., it has had a significant impact on the overall pop culture beyond the scope of science and technology. The world's leading IT company : Google, Apple, Samsung, Microsoft, Sony, LG is focusing on development of AR, VR technology for the public. The many large and small companies developed VR hardware, VR software, VR content. It does not look that makes a human a human operation in the cognitive experience of certain places or situations or invisible through Specific platforms or program is Encompass a common technique that a realization of the virtual space. In particular, out of the three-dimensional image reveals the limitations of the conventional two-dimensional structure - 180, 360 degree images provided by the subjective and objective symptoms such as vision and sense of time and got participants to select it. VR technology that can significantly induce the commitment and participation is Industry as well as to the general public which leads to the attention of colostrum. It was introduced more than 10 related VR works Year 2015 Sundance Film Festival New Frontier program. The appearance VR content : medical, architecture, shopping, movies, animations. Also, 360 individuals can be produced by the camera / video sharing VR is becoming an interactive tunnel between two possible users. Nevertheless, This confusion of values, moral degeneration and the realization of a virtual space that has been pointed out that the inherent. 4K or HUD, location tracking, motion sensors, processing power, and superior 3D graphics, touch, smell, 4D technology, 3D audio technology - It developed more than ever and possible approaches to reality. Thereafter, This is because the moral degeneration, identity, generational conflict, and escapism concerns. Animation is also seeking costs in this category Reality. Despite the similarities rather it has that image, and may be the reason that the animation is pushed back to the VR content creation. However, it is focused on the game and VR technology and the platform that is entertaining, but also seek new points within the animation staying in the flat Given that eventually consist of visual images is clear that VR sought. Finally, What is the reality created in the virtual space using VR technology could be applied to the animation? So it can be seen that the common interest is research on what methods and means applied.

• International Journal of Highway Engineering
• /
• v.8 no.2 s.28
• /
• pp.63-74
• /
• 2006

During the construction of circular underground pipe, the non-proper compaction along the pipe and the decrease of compaction efficiency have been the main problems to induce the failure of underground pipe or facility. The use of CLSM (controlled low strength materials) should be one of the possible applications to overcome those problems. In this research, the full-scaled field test and the numeric analysis using PENTAGON-3D FEM program were carried out for three different cases on the change of backfill materials, including the common sand, the soil from construction site, and the CLSM. From the full-scaled test in field, the use of in-situ CLSM as backfill materials reduced the vertical and lateral deformation of the pipe, as well as the deformation of the ground surface. The main reason for reducing the deformation would be the characteristics of the CLSM, especially self-leveling and self-hardening properties. The measured earth pressure at the surround of the corrugated pipe using the CLSM backfills was the smaller than the other cases, and the absolute value was almost zero. Judging from the full-scaled field test and FEM analysis, the use of CLSM as backfill materials should be one of the best choices reducing the failure of the underground pipes.

• Korean Security Journal
• /
• no.21
• /
• pp.155-175
• /
• 2009

RFID that provide automatic identification by reading a tag attached to material through radio frequency without direct touch has some specification, such as rapid identification, long distance identification and penetration, so it is being used for distribution, transportation and safety by using the frequency of 125KHz, 134KHz, 13.56MHz, 433.92MHz, 900MHz, and 2.45GHz. Also it is one of main part of Ubiquitous that means connecting to net-work any time and any place they want. RFID is expected to be new growth industry worldwide, so Korean government think it as prospective field and promote research project and exhibition business program to linked with industry effectively. RFID could be used for access control of person and vehicle according to section and for personal certify with password. RFID can provide more confident security than magnetic card, so it could be used to prevent forgery of register card, passport and the others. Active RFID could be used for protecting operation service using it's long distance date transmission by application with positioning system. And RFID's identification and tracking function can provide effective visitor management through visitor's register, personal identification, position check and can control visitor's movement in the secure area without their approval. Also RFID can make possible of the efficient management and prevention of loss of carrying equipments and others. RFID could be applied to copying machine to manager and control it's user, copying quantity and It could provide some function such as observation of copy content, access control of user. RFID tag adhered to small storage device prevent carrying out of item using the position tracking function and control carrying-in and carrying-out of material efficiently. magnetic card and smart card have been doing good job in identification and control of person, but RFID can do above functions. RFID is very useful device but we should consider the prevention of privacy during its application.

• Journal of Veterinary Clinics
• /
• v.26 no.2
• /
• pp.138-143
• /
• 2009

Ischemia/reperfusion injury(I/RI) is the major cause of acute renal failure and delayed graft function(DGF) unavoidable in renal transplantation. Enormous studies on ischemia damage playing a role in activating graft rejection factors, such as T cells or macrophages, are being reported. Present study was performed to determine whether ischemia time would play an important role in activating rejection-related factors or not in rat models of I/RI. Male Sprague-Dawley rats were submitted to 30, 45, and 60 minutes of warm renal ischemia with nephrectomy or control animals underwent sham operation(unilateral nephrectomy). Renal function and survival rates were evaluated on day 0, 1, 2, 3, 5 and 7. Immunofluorescence staining of dendritic cells(DCs), natural killer(NK) cells, macrophages, B cells, CD4+ and CD8+ T cells were measured on day 1 and 7 after renal I/RI. Survival rates dropped below 50% after day 3 in 45 minutes ischemia. Histologic analysis of ischemic kidneys revealed a significant loss of tubular architecture and infiltration of inflammatory cells. DCs, NK cells, macrophages, CD4+ and CD8+ T cells were infiltrated from a day after I/RI depending on ischemia time. Antigen presenting cells(DCs, NK cells or macrophages) and even T cells were infiltrated 24 hours post-I/RI, which is at the time of acute tubular necrosis. During the regeneration phase, not only these cells increased but B cells also appeared in more than 45 minutes ischemia. The numbers of the innate and the adaptive immune cells increased depending on ischemia as well as reperfusion time. These changes of infiltrating cells resulting from each I/RI model show that ischemic time plays a role in activating rejection related immune factors and have consequences on progression of renal disease in transplanted and native kidneys.

• Journal of Korea Spatial Information System Society
• /
• v.7 no.3 s.15
• /
• pp.67-81
• /
• 2005

Recently, the interest and research on the development of new application services such as the Location Based Service and Telemetics providing the emergency service, neighbor information search, and route search according to the development of the Geographic Information System have been increasing. User's search in the spatio-temporal database which is used in the field of Location Based Service or Telemetics usually fixes the current time on the time axis and queries the spatial and aspatial attributes. Thus, if the range of query on the time axis is extensive, it is difficult to efficiently deal with the search operation. For solving this problem, the snapshot, a method to summarize the location data of moving objects, was introduced. However, if the range to store data is wide, more space for storing data is required. And, the snapshot is created even for unnecessary space that is not frequently used for search. Thus, non storage space and memory are generally used in the snapshot method. Therefore, in this paper, we suggests the Hash-based Spatio-Temporal Clustering Algorithm(H-STCA) that extends the two-dimensional spatial hash algorithm used for the spatial clustering in the past to the three-dimensional spatial hash algorithm for overcoming the disadvantages of the snapshot method. And, this paper also suggests the knowledge extraction algorithm to extract the knowledge for the path search of moving objects from the past location data based on the suggested H-STCA algorithm. Moreover, as the results of the performance evaluation, the snapshot clustering method using H-STCA, in the search time, storage structure construction time, optimal path search time, related to the huge amount of moving object data demonstrated the higher performance than the spatio-temporal index methods and the original snapshot method. Especially, for the snapshot clustering method using H-STCA, the more the number of moving objects was increased, the more the performance was improved, as compared to the existing spatio-temporal index methods and the original snapshot method.

• Korean Journal of Ecology and Environment
• /
• v.48 no.4
• /
• pp.212-218
• /
• 2015

In South Korea, various nature-like fishways recently been installed for use by a wide variety of fish species. However, limited attempts have been made to monitor the fish utilization. The present study was conducted to ascertain the frequencies and patterns of utilization of the fishway installed at Beakjae Weir. We collected fish species that use the fishway by installing a fyke net at the exit of the fishway at least once a month from April 2013 to October 2013. Additionally, in order to identify all fish species that can potentially use the fishway, we investigated the fish fauna downstream to Beakjae Weir (mainstream of the Geum River). We found that 10 species belonging to 2 families used the fishway; this accounted for 64% of the total species inhabiting the mainstream. The species that used the fishway most frequently were Microphysogobio jeoni, followed by Squaliobarbus curriculus and Opsariichthys uncirostris amurensis. The highest number of fish using the fishway was observed in August, which was positively correlated with the water temperature (Spearman rank correlation, $r_s$=0.743, P=0.035). The sizes of the fish using the fishway varied widely, with the total body length ranging from 39 mm to 550 mm. Analysis of the time-dependent utilization frequency revealed that most fish used the fishway during the night (20:00~08:00). Compared to other fishways installed along the Geum River, the fishway installed at Beakjae Weir was used by fewer species and fish. This may be attributed to the structural inadequacy of the fishway, thereby resulting in a low attraction efficiency. Therefore, measures should be adopted to enhance the fishway attraction and passage efficiency. The results of this study can be used to ensure efficient operation and management of the Beakjae Weir fishway as well as serve as basic data for developing and building nature-like fishways tailored to Korean situations.

• Korean Journal of Ecology and Environment
• /
• v.42 no.3
• /
• pp.350-363
• /
• 2009

Inter- and intra-specific differences in removal activities, filtering rates (FR) and production of feces-and pseudo-feces (PF) between a native freshwater bivalve in Korea, Anodonta woodiana Lea and Unio douglasiae Griffith et Pidgeon, were compared using a continuous removal of organic matters (CROM) system. The CROM system comprised five steps; input of polluted water, control of water flow, mussel treatment, analysis of water quality and discharge of clean water. The study was designed to compare the removal activity of organic matters between A. woodiana and U. douglasiae, and the intra-specific differences between density and length in A. woordiana. Results clearly indicate that two kinds of mussels had obvious removal activities of seston in the eutrophic reservoir. First, if both are similar in shell length, there were no significant inter-specific differences in removal activity between A. woordiana and U. douglasiae (P>0.5), but FRs of U. douglasiae was relatively high due to low ash-fee dry weight. Second, if both are same in animal density, the smaller mussels (1$\sim$2 years old) showed a higher filtering rate and production of feces- and pseudo-feces and less release of ammonium than the larger mussels. Third, if both are same in biomass, FRs and PF of mussels were higher in the low-density tank than the high-density tank, While the Concentration of $NH_4$-N and $PO_4$-P released WRS similar to each other (P>0.5). Therefore, these results suggest that CROM system using a young bivalve A. woordiana can be applied to control the nuisance seston in eutrophic lake system, if a relevant species and density were selected. Additional pilot tests to optimize the age and density of domestic bivalves were needed for the generalization of CROM operation.

• Proceedings of the Korean Radioactive Waste Society Conference
• /
• 2005.06a
• /
• pp.110-120
• /
• 2005

For utilizing vitrification to treat low and intermediate level waste, industrial pilot plant was designed and constructed in October 1999 at Daejon, Korea through the joint research program among NETEC, MOBIS and SGN. More than 70 tests were performed on simulated IER, DAW etc. including key nuclide surrogate(Cs, Co); this plant has been shown to vitrify the target waste effectively and safely, however, some dust are generated from the HTF(High Temperature Filter) as a secondary waste. In case of long term operation, it is also concerned that pipe plugging can be occurred due to deposited dust in cooling pipe namely, connecting pipe between CCM(Cold Crucible Melter) and HTF. In this regard, we have developed the special complementary system of the off-gas treatment system to recycle the dust from HTF to CCM and to remove the interior dust of cooling pipe. Main concept of the dust recycling is to feed the dust to the CCM as a slurry state; this system is regarded as of an important position in the viewpoint of volume reduction, waste disposal cost and glass melt control in CCM. The role of DRS(Dust Recycling System) is to recycle the major glass components and key nuclides; this system is served to lower glass viscosity and increase waste solubility by recycling B, Na, Li components into glass melt and also to re-entrain and incorporate into glass melt like Cs, Co. Therefore dust recycling is helpful to control the molten glass; it is unnecessary to consider a separate dust treatment system like a cementation equipment. The effects of Dust Cleaner are to prevent the pipe plugging due to dust and to treat the deposited dust by raking the dust into CCM. During the pilot vitrification test, overall performance assessment was successfully performed; DRS and Dust Cleaner are found to be useful and effective for recycling the dust from HTF and also removing the dust in cooling pipe. The obtained operational data and operational experiences will be used as a basis of the commercial facility.