• The Transactions of the Korean Institute of Power Electronics
• /
• v.18 no.4
• /
• pp.312-321
• /
• 2013

In this paper, high efficiency control method for flyback inverter with synchronous rectifier(SR) based on photovoltaic AC modules is proposed. In this control method, the operation of SR is classified according to the voltage spike across main switch SP. When the voltage spike across SP is lower than the rating voltage of SP, the operation of active clamp circuit is interrupted for reducing the switching loss of auxiliary switch. In this time, the SR is operated for soft-switching of SP. When the voltage spike across Sp is higher than the rating voltage of SP, the operation of active circuit is activated for reducing the voltage spike. The SR is operated for reducing the conduction loss of secondary output diode. Thus, a switching loss of the main switch can be reduced in low power region, and weighted-efficiency can be improved. A theoretical analysis and the design principle of the proposed method are provided. And validity is confirmed through simulation and experimental results.

• Journal of the Korea Institute of Building Construction
• /
• v.11 no.1
• /
• pp.19-27
• /
• 2011

The capital of investment of SOC projects is too large to be taken charge of a country. The government introduces the private investment like a BTL project because of the limited national resources. However, even the company which wants order constructions, do not consider the fundamentals such as accurate estimation, capability of construction company and construction period. The purpose of the research is to suggest the basic influential factors for obtaining a BTL project and offers the concludes for the successful operation after the contract. The result of the research is followed. 54 effect successful factors are compressed into 11 principle factors by analysis on those 54 factors, CSFs of BTL business are constructed. Regression analysis is induced by variable of primary success factors and success degree, and derives the influence degree of effect successful factors in business. Regression analysis that is mentioned above showed considerable issues from importance of primary factors, prime cost fluctuation factors and comparison of management-level. So this study could suggest the effective operate plan of BTL business.

• The Mathematical Education
• /
• v.34 no.1
• /
• pp.17-63
• /
• 1995

The exploration of Mathematics-learningmodel on the basis of Cognitive development The purpose of this paper is to sequenctialize Mathematics-learning contents, and to explore teaching-learning model for mathematics, with on the basis of the theory of cognitive development and the period of condservation formation for children. The Specific topics are as follows: (1) Systemizing those theories of cognitive development which are related to Mathematics - learning for children. (2) Organizing a sequence of Mathematics - learning, on the basis of experimental research for the period of conservation formation for children. (3) Comparing the effects of 4 types of teaching - learning model, on the basis of inference activity and operational learning principle. $\circled1$ Induction-operation(IO) $\circled2$ Induction-explanation(IE) $\circled3$ Deduction-operation(DO) $\circled4$ Deduction-explanation(DE) The results of the subjects are as follows: (1) Cognitive development theory and Mathe-matics education. $\circled1$ Congnitive development can be achieved by constant space and Mathematics know-ledge is obtained by the interaction of experience and reason. $\circled2$ The stages of congnitive development for children form a hierarchical system, its function has a continuity and acts orderly. Therefore we need to apply cognitive development for children to teach mathematics systematically and orderly. (2) Sequence of mathematical concepts. $\circled1$ The learning effect of mathematical concepts occurs when this coincides with the period of conservation formation for children. $\circled2$ Mathematics Curriculum of Elementary Schools in Korea matches with the experimental research about the period of Piaget's conservation formation. (3) Exploration of a teaching-learning model for mathematics. $\circled1$ Mathematics learning is to be centered on learning by experience such as observation, operation, experiment and actual measurement. $\circled2$ Mathematical learning has better results in from inductional inference rather than deductional inference, and from operational inference rather than explanatory inference.

• Archives of Plastic Surgery
• /
• v.35 no.5
• /
• pp.619-621
• /
• 2008

Purpose: By virtue of good nourishment, obese boys are increasing in Korea, which may result in prevalence of cryptopenis. As milieu of economy, culture, and society changes, increased attention to the external genitalia in children should encourage surgeon to do assertive treatment for cryptopenis. But various operative methods have been devised yet to need sophistication and revision. The author performed suprapubic lipectomy and operation according to the modification of the Johnston's principle. Methods: The patient was 5 years old, 32 kg, and 122 cm. He had no pain or tenderness. The operation was done under general anesthesia. It was done with excision of suprapubic fat, cutting of retracted dartos fascia instead of removing the fascia around penile base, and anchoring of dermis and the cutting margin of the fascia to the underlying fascia such as Buck's fascia, tunica albuginea and rectus fascia at penile base. And then circumcision was performed. Results: Postoperative complication was not observed. The clinical result of the operation was satisfactory to both surgeon and parents of the patient. Conclusion: Suprapubic lipectomy and anchoring of dermis and retracted cutting dartos fascia margin to the underlying fascia in all directions at the penile base through a single suprapubic incision provide this patient with complacency.

• Journal of Korea Water Resources Association
• /
• v.30 no.3
• /
• pp.269-278
• /
• 1997

Operating rules, the basic principle of reservoir operation, are mostly developed from maximum or minimum, mean inflow series so that those rules cannot be used in practical operating situations to estimate the expected benefits or provide the operating policies for uncertainty conditions. Many operating rules based on the deterministic method that considers all operation variables including inflows as known variables can not reflect to uncertainties of inflow variations. Explicit operating rules can be developed for improving the weakness. In this method, stochastic trend of inflow series, one of the reservoir operation variables, can be directly method, the stochastic technique was applied to develop reservoir operating rule. In this study, stochastic dynamic programming using the concepts was applied to develop optimal operating rule for the Chungju reservoir system. The developed operating rules are regarded as a practical usage because the operating policy is following up the basic concept of Lag-1 Markov except for flood season. This method can provide reservoir operating rule using the previous stage's inflow and the current stage's beginning storage when the current stage's inflow cannot be predicted properly.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.13 no.3
• /
• pp.1337-1345
• /
• 2012

The principle of Effective Based Operation applied to the Korean Theater resulted in measurable effects to win the minimum battle. Based on the finding, this study recommends the effect analysis methodology under the V-C interoperability system to acquire a weapon system. This method is followed as below; to confirm the effect data on the organized weapon system, to set MOE, MOP and effect considering the purpose of the analysis, to apply the appropriate operational concept and scenario on the weapon system, and then the available C Model is after action reviewed, adjusted, and given feedback. The V-C interoperability system enables to perform the real-time combat experiment under the virtual synthesized battlefield circumstances. The defensive battle organization and displacement of the future anti-tank guided weapon system was considered in the modeling process. Scenario was written, which encompasses company-level units and the battalion-level operation. Then the available AWAM was embodied and effect-analyzed, which formed the foundation of SBA.

• Journal of Korean Society of Disaster and Security
• /
• v.6 no.1
• /
• pp.47-53
• /
• 2013

Standard Incident Command System in Korea is that Incident Command System for Emergency Rescue Operation, which is commanded only by Fire Fighting Agencies. However, in the event of a disaster such as the flood, storm, or landslide disaster, there are many disaster response activities performed by the General Public Officers at the disaster on-scene. Yet, there isn't an Natural Disaster Command System for the General Public Officers in Korea. Thus, we have studied the response activities needed cooperation among agencies and proposed some considerations of the Natural Disaster Command System for General Public Officers. The system will be useful to response and recover disaster rapidly, seamlessly, and cooperatively among General Public Officers and the related agencies.

• The Journal of Korean Institute for Practical Engineering Education
• /
• v.2 no.2
• /
• pp.30-35
• /
• 2010

This paper proposes several methods for effective teaching of programing language(especially C). The programing languages are very important and basic subjects in the Department of Computer Engineering and Science. Many students have some difficulty in learning the programming languages. So, we will suggest several effective methods for effective teaching of programming languages. First, in order to understand the programming language effectively, we need to teach some basic computer architecture and operation principles of computer program to students. Second, it is better to teach many example-based programing skills instead of conventional grammar teaching. Third, if we teach the memory status(memory allocation/release) during the program operation, it will be much better to understand the pointer variables and memory problems. Fourth, let's improve the programming skills through effective homework assignments and experiments. Fifth, let students be guided so that they do programing by themselves. Finally, we can maximize the programming skill through the final termproject.

• Journal of Power Electronics
• /
• v.16 no.5
• /
• pp.1869-1883
• /
• 2016

In recent years, some converter structures and analyzing methods for the voltage regulation of stand-alone self-excited induction generators (SEIGs) have been introduced. However, all of them are concerned with the three-phase voltage control of three-phase SEIGs or the single-phase voltage control of single-phase SEIGs for the operation of these machines under balanced load conditions. In this paper, each phase voltage is controlled separately through separated converters, which consist of a full-bridge diode rectifier and one-IGBT. For this purpose, the principle of the electronic load controllers supported by fuzzy logic is employed in the two-different proposed converter structures. While changing single phase consumer loads that are independent from each other, the output voltages of the generator are controlled independently by three-number of separated electronic load controllers (SELCs) in two different mode operations. The aim is to obtain a rated power from the SEIG via the switching of the dump loads to be the complement of consumer load variations. The transient and steady state behaviors of the whole system are investigated by simulation studies from the point of getting the design parameters, and experiments are carried out for validation of the results. The results illustrate that the proposed SELC system is capable of coping with independent consumer load variations to keep output voltage at a desired value for each phase. It is also available for unbalanced consumer load conditions. In addition, it is concluded that the proposed converter without a filter capacitor has less harmonics on the currents.

• Journal of the Korean Society for Nondestructive Testing
• /
• v.5 no.1
• /
• pp.34-47
• /
• 1985

The developing country, KOREA where does not possess the natural resources for traditional energy such as oil and gas, so. The nuclear energy is the most single reliable source available for closing the energy gap. For these reason, It is inavoidable to construct the nuclear power plant and to develop technology related nuclear energy. The rate of operation in large nuclear power facilities depends upon the performance of work system through design and construction, and also the applied technology. Especially, it is the most important element that safety and reliability in operation of nuclear power plant. In view of this aspects, Nuclear power plant is performed severe examinations during preservice and inservice inspection. This study provide an automation of analysis for volumetric examination which is required to nuclear power plant components. It is composed as follows: I. Introduction II. Inservice Inspection of Nuclear Power Plant ${\ast}$ General Requirement. ${\ast}$ Principle and Methods of Ultrasonic Test. ${\ast}$ Study of Flaw Evaluation and Design of Classifying Formula for Flaws. III. Design of Automation for Flaw Evaluation. IV. An Example V. Conclusion In this theory, It is classifying the flaws, the formula of classifying flaws and the design of automation that is the main important point. As motioned the above, Owing to such as automatic design, more time could be allocated to practical test than that of evaluation of defects, Protecting against subjective bias tester by himself and miscalculation by dint of various process of computation. For the more, adopting this method would be used to more retaining for many test data and comparative evaluating during successive inspection intervals. Inspite of limitation for testing method and required application to test components, it provide useful application to flow evaluation for volumetric examination. Owing to the characteristics of nuclear power plant that is highly skill intensive industry and has huze system, the more notice should be concentrated as follows. Establishing rational operation plan, developing various technology, and making the newly designed system for undeveloped sector.