• 대한교통학회지
• /
• 제26권6호
• /
• pp.123-132
• /
• 2008

동적(dynamic) 기종점(origin-destination, OD) 통행량은 다양한 교통분야에 활용이 가능한데, 대표적으로 동적 통행배정모형의 입력자료와 같은 교통계획분야와 실시간 도로교통 운영분야, 그리고 교통수요 관리분야 등에도 사용할 수 있다. 이런 교통정책들을 평가하기 위해서는 정확한 동적 OD통행량의 추정은 무엇보다 중요하며, 이를 위하여 다양한 기법들이 제시되고 있다. 본 연구에서는 최근 새롭게 연구되고 있는 개인이 소지한 통행 단말기 정보를 이용하여 동적 OD통행량을 추정하고 이를 평가하고자 한다. 이를 위하여 동적 OD추정모형을 개발하고 개발된 추정모형과 동적 통행배정모형(DYNASMART-P)을 이용하여 동적 OD통행량을 추정하는데, 동적OD통행량 추정시 이용되는 단말기 정보가 표본자료(sample data)이기 때문에 이를 전수화하는 과정이 포함된다. 본 연구에서 제안한 방법으로 제주시를 대상으로 동적OD통행량을 추정한 결과, 그 가능성을 확인할 수 있었다.

• Membrane and Water Treatment
• /
• 제9권6호
• /
• pp.421-434
• /
• 2018

Decision-makers have different and sometimes conflicting goals with utilities in operating dam reservoirs. As repeated interactions exist between decision-makers in the long-term, and the utility of each decision-making organization is affected not only by its selected strategy, but also by other rivals' strategies; selecting and prioritizing optimum strategies from a decision maker's point of view are of great importance while interacting with others. In this paper, a model based on a fuzzy set theory, for determining the priority of decision-makers' strategies in optimal qualitative-quantitative operation management of dam reservoir is presented. The fuzzy priority matrix is developed via defining membership functions of a fuzzy set for each decision maker's strategies, so that all uncertainties are taken into account. This matrix includes priorities assigned to possible combination for other decision makers' strategies in bargaining with each player's viewpoint. Here, the 15-Khordad Dam located in the central part of Iran, suffering from low water quality, was studied in order to evaluate the effectiveness of the model. Then, the range of quality of water withdrawal agreed by all decision-makers was determined using the prioritization matrix based on fuzzy logic. The results showed that the model proposed in the study had high effectiveness model.

• Journal of Power Electronics
• /
• 제17권4호
• /
• pp.1048-1057
• /
• 2017

An indirect matrix converter (IMC) is a modern power generation system that enables a direct ac/ac conversion without the need for any bulky and limited lifetime electrolytic capacitor. This system also allows four-quadrant operation, generation of sinusoidal output voltage waveforms with variable frequency and amplitude, and control of input power factor. This study proposes a pulse-width modulation-based sliding-mode controller to achieve unity input-power factor operation of the IMC independently of the active power exchanged with the grid, as well as a fast dynamic response. The designed equivalent control law determines, at each sampling period, the appropriate q-axis component of the modulated input current to be injected into the grid through the LC input filter. An integral term of the error is included in the expression of the sliding surface to increase the accuracy of the control method. A double space vector modulation method is used to synthesize the direction of the space vector of the input currents as required by the sliding-mode controller and the space vectors of the target output voltages. Simulation and experimental results are provided to show the effectiveness and evaluate the performance of the proposed control method.

• 한국정보통신학회논문지
• /
• 제24권7호
• /
• pp.956-962
• /
• 2020

최근 임베디드 시스템에서 사용되는 데이터의 크기가 증가함에 따라, 대용량의 데이터를 안전하게 수신하기 위한 ECC (Error Correction Code) 복호화 연산의 필요성이 강조되고 있다. 본 논문에서는 GPU가 내장된 임베디드 시스템에서 해밍 코드를 사용하여 ECC 복호화를 할 때, 신드롬 벡터를 계산하는 연산의 수행을 가속할 방법을 제안한다. 제안하는 가속화 방법은, 복호화 연산의 행렬-벡터 곱셈이 희소 행렬을 나타내는 자료 구조 중 하나인 CSR (Compressed Sparse Row) 형식을 사용하고, GPU의 CUDA 커널에서 병렬적으로 수행되도록 한다. 본 논문에서는 GPU가 내장된 실제 임베디드 보드를 사용하여 제안하는 방법을 검증하였고, 결과는 GPU 기반으로 가속된 ECC 복호화 연산이 CPU만을 사용한 경우에 비하여 수행 시간이 감소하는 것을 보여준다.

• Nuclear Engineering and Technology
• /
• 제53권5호
• /
• pp.1569-1579
• /
• 2021

This study aims to provide microstructural characterization for the matrix graphite which molten salt reactors (MSRs) use, and improve resistance to molten salt infiltration of the matrix graphite for fuel elements. Mesocarbon microbeads (MCMB) densified matrix graphite A3-3 (MDG) was prepared by a quasi-isostatic pressure process. After densification by MCMBs with average particle sizes of 2, 10, and 16 ㎛, the pore diameter of A3-3 decreased from 924 nm to 484 nm, 532 nm, and 778 nm, respectively. Through scanning electron microscopy, the cross-section energy spectrum and time-of-flight secondary ion mass spectrometry, resistance levels of the matrix graphite to molten salt infiltration were analyzed. The results demonstrate that adding a certain proportion of MCMB powders can improve the anti-infiltration ability of A3-3. Meanwhile, the closer the particle size of MCMB is to the pore diameter of A3-3, the smaller the average pore diameter of MDG and the greater the densification. As a matrix graphite of fuel elements in MSR was involved, the thermal and mechanical properties of matrix graphite MDG were also studied. When densified by the MCMB matrix graphite, MDGs can meet the molten salt anti-infiltration requirements for MSR operation.

• 한국컴퓨터정보학회논문지
• /
• 제4권4호
• /
• pp.94-100
• /
• 1999

본 논문은 흡필드 모델의 실수연산을 고속으로 수행할 수 있는 디지털 신경회로망의 구현에 관한 연구이다. 흡필드 모델［1］-［8］의 연산과정은 행렬-벡터의 연산으로 기술 할 수 있으며, 이 연산과정은 순환, 반복적으로 이루어지므로 어레이프로세서 구조로 설계하기에 적합하다. 또한, Look-up-Table(연산표)에 의하여 비선형 함수를 출력함으로써, 고속의 실수 연산을 수행할 수 있도록 설계하였다. 본 논문에서 제안한 방법은 현재 개발된 VLSI기술로 실현 가능하기 때문에 실제 신경회로망의 응용분야에 이용될 수 있을 것으로 기대된다.

• International Journal of Internet, Broadcasting and Communication
• /
• 제7권2호
• /
• pp.73-78
• /
• 2015

Touch panel is mainly applied to pressure type touch panel but it occur a low recognition rate and error during long-term use. So, it is partly applied to capacitive touch panel to compensate for these problems but it also can occur a same problems via pollutions. Touch technology has developed a various method but it is not used because of high costs and difficult installation process. So, in this paper, we proposed an input method of touchless panel using IrDA matrix. This method is conducted using an IrDA Matrix composed of depth sensor. It is possible to offer a various contents for multi user. The proposed technology need a development of a high sensitivity sensing method and high-speed processing method of position information for Seamless operation control. And, it is required high-precision drive technology. Also, we proposed a Seamless user recognition for interactive contents service through a touchless panel using IrDA matrix.

• International Journal of Fuzzy Logic and Intelligent Systems
• /
• 제5권1호
• /
• pp.13-20
• /
• 2005

This paper addresses a new blind channel equalization method using fourth-order cumulants of channel inputs and a three-layer neural network equalizer. The proposed algorithm is robust with respect to the existence of heavy Gaussian noise in a channel and does not require the minimum-phase characteristic of the channel. The transmitted signals at the receiver are over-sampled to ensure the channel described by a full-column rank matrix. It changes a single-input/single-output (SISO) finite-impulse response (FIR) channel to a single-input/multi-output (SIMO) channel. Based on the properties of the fourth-order cumulants of the over-sampled channel inputs, the iterative algorithm is derived to estimate the deconvolution matrix which makes the overall transfer matrix transparent, i.e., it can be reduced to the identity matrix by simple recordering and scaling. By using this estimated deconvolution matrix, which is the inverse of the over-sampled unknown channel, a three-layer neural network equalizer is implemented at the receiver. In simulation studies, the stochastic version of the proposed algorithm is tested with three-ray multi-path channels for on-line operation, and its performance is compared with a method based on conventional second-order statistics. Relatively good results, withe fast convergence speed, are achieved, even when the transmitted symbols are significantly corrupted with Gaussian noise.

• 대한전기학회논문지:전력기술부문A
• /
• 제48권9호
• /
• pp.1081-1087
• /
• 1999

Load Flow calulation methods can usually be divided into Gauss-Seidel method, Newton-Raphson method and decoupled method. Load flow calculation is a basic on-line or off-line process for power system planning. operation, control and state analysis. These days Newton-Raphson method is mainly used since it shows remarkable convergence characteristics. It, however, needs considerable calculation time in construction and calculation of inverse Jacobian matrix. In addition to that, Newton-Raphson method tends to fail to converge when system loading is heavy and system has a large R/X ratio. In this paper, matrix equation is used to make algebraic expression and then to slove load flow equation and to modify above defects. And it preserve P-Q bus part of Jacobian matrix to shorten computing time. Application of mentioned algorithm to 14 bus, 39 bus, 118 bus systems led to identical results and the same numbers of iteration obtained by Newton-Raphson method. The effect of computing time reduction showed about 28% , 30% , at each case of 39 bus, 118 bus system.

• Journal of Biosystems Engineering
• /
• 제30권4호
• /
• pp.195-201
• /
• 2005

The output of Stirling engine is influenced by the regenerator effectiveness. The regenerator effectiveness is influenced by heat transfer and flow friction loss of the regenerator matrix. In this paper, in order to provide a basic data for the design of regenerator matrix, characteristics of heat transfer and flow friction loss were investigated by a packed method of matrix in the oscillating flow as the same condition of operation in a Stirling engine. As matrices, several kinds of combined wire screen meshes were used. The results are summarized as follows; The packed meshes with high mesh no. in the side of heater part of regenerator showed effective than the packed meshes with low mesh no. in the side of cooler part of regenerator. The temperature difference and pressure drop of the regenerator were not made by the specific surface area of wire screen meshes but by the minimum free-flow area to the total frontal area. Among the No. 150 single screen meshes, 200-60 combined meshes, the 200-150-100 combined meshes showed the highest in effectiveness.