• Journal of Korean Society of Water and Wastewater
• /
• v.31 no.1
• /
• pp.63-72
• /
• 2017

For economic evaluation of integrated operation to sewage facilities, benefit-cost analysis was performed to watershed sewage works project in 7 watershed areas, 156 facilities. In this study, the cost before and after integrated operation was compared and benefits are calculated from the reduction of operators, increasement treated pollution loads, reduction cost through operation convenience, reduction water consumption through effluent reuse, and improvement of life benefit. The result showed that cost was 8,500million won and benefit was 16,747million won, so benefit was 49% higher than cost. B/C analysis result showed that B/C ratio was 1.97 and it is similar to other researches. The benefits of integrated operation included convenience of data management, increase of emergency response, decrease of complains with sewage which was not reflected numerically, so the benefits of integrated operation were expected much greater than this result

• Journal of the Korean Society of Marine Environment & Safety
• /
• v.12 no.4 s.27
• /
• pp.247-252
• /
• 2006

In this study, the index for operation evaluation index for safety management system that can be facilitated as the assessment tool for system operation monitoring and operation outcome and the safety management system of shipping companies has been developed. By using this index, this study may provide the instruction or consultation for frequent facilitation by comprehensively recording the required knowledge for each operation stage for the companies that prepares the introduction of the safety management system and companies that already introduced the system to maintain and develop the system. In addition, when working on internal audit and assessing the system operation outcome, it may be facilitated as the assessment tool to contribute in continuous improvement and development. This index is consisted of 11 large categories, 35 items of medium categories and 447 small categories.

• Journal of Korean Society of Industrial and Systems Engineering
• /
• v.41 no.4
• /
• pp.42-49
• /
• 2018

Pilot Aptitude Research Equipment (PARE) is a simulator developed to measure or research pilot aptitude and train for student pilots. Design of an ergonomic PARE operation console is required to operate the equipment effectively. This study carried out five steps : (S1) operator questionnaire survey, (S2) anthropometric design formula development, (S3) usability evaluation, (S4) improvement design, and (S5) validation considering both Physical User Interface (PUI) and Graphic User Interface (GUI) of PARE operation console. The operator questionnaire surveyed needs for each PUI and GUI part of the console from two PARE actual operators. In terms of PUI, the anthropometric design formula was developed by using design variables, body dimensions, target population characteristics, and reference posture related to the PARE console. In terms of GUI, the usability evaluation was conducted by three usability testing experts with a 7-point scale (1 : very low, 4 : neutral, 7 : very high) on GUI of the PARE operation console by seven usability criteria. The improved PARE operation console was designed to reflect the optimal values of design variables calculated from design formula, the results from usability testing, and the operator's needs. The improvement effect was observed by 20 people who had experience with the PARE operation console. As a result of the validation, monitor visibility and cockpit visibility for the improved PUI design and visibility and efficiency for the improved GUI design were significantly increased by more than 90% respectively. The improved design of the PARE operation console in this study can contribute to enhance operation performance of the PARE.

• International Area Studies Review
• /
• v.21 no.1
• /
• pp.303-324
• /
• 2017

Current methods to evaluate the performance of ROK military contingents to UN missions unnecessarily raises the issues of relevance, validity and reliability. Thus, this article aims to suggest how the result based evaluation (RBE) model which is widely adopted in the UN field missions as well as the international development community would be modified and applied to peace operation of the ROK contingent. As a result of the study, the model presents a framework that integrates the planning process and monitoring and evaluation with a logical framework, which entails a cycle of assessment of pre-deployment planning, monitoring and phased evaluation, and post-deployment evaluation. Secondly, according to measurement of RBE benchmarks to the present ROK's monitoring and evaluation system, factors in an evaluation unit and a logical framework approach are unmet or partly met to the benchmarks. In addition, ex-post impact evaluation has been rarely performed. Finally, the policy recommendations for resolution of the aforementioned challenges as well as a joint evaluation unit, participated by experts in a civilian, public, and a military domain are proposed.

• Journal of Korean Society of Occupational and Environmental Hygiene
• /
• v.20 no.2
• /
• pp.131-138
• /
• 2010

This technical report was developed to suggest the guideline to assess the safe use and handling metalworking fluids (MWFs) in machining operation. The basis of this method developed in this study was based on self assessment procedure recommended by Organization Resources Counselors (ORC) of the United States (US). In addition, various MWF management elements obtained from the review on various articles, reports and author's experience regarding MWF were newly added to the evaluation guideline. A total of four areas were finally selected in order to control exposure to MWF used in machining operations. They are all related to the presence and efficiency of the control measures, exposure assessment, management on tank and sump, and safe treatment of chips and metal fines generated during machining operations. Each area is consisted of several related elements. Several evaluation areas and elements used in this study could be revised, replaced, added and deleted according to the process environment, evaluation objectives and evaluator's (manager) criteria etc. This evaluation guide manual could be used for safe management of MWF in metalworking operation. In addition, industrial hygienists can use this evaluation method for auditing and evaluating the management status on MWF.

• Korean Journal of Child Studies
• /
• v.37 no.6
• /
• pp.119-132
• /
• 2016

Objective: The purpose of this study was to analyze the operation and personal information management of public and private kindergarten homepages. Methods: A total of 2,846 kindergartens were selected from the I-Sarang portal service for analyzing operation, and 217 self-operating homepages were selected for evaluating management. Seven evaluation items from three domains (information gathering procedures and scope, information security, and management of file exposure protection) were used. Wireshark and Google were used for analyzing some evaluation items. Results: The operating ratio of kindergarten homepages was low and most of the kindergartens self-operated their homepages. The evaluation of the information gathering procedures and scope showed that the rule of consent process was not rigidly followed but that the rule of legality for information gathering was followed. Items related to information security were followed at very low levels. As for the management of file exposure protection, the evaluation of items related to the prevention of attachment disclosure showed that the rule of protecting personal information included in an attached file was followed but that the notice regarding information protection was not. Across all evaluation items, the level of personal information management was higher in public (vs. private) kindergartens. Conclusion: These results indicate methods to more securely and effectively manage personal information on kindergarten homepages.

• Transactions of the Korean Society of Mechanical Engineers A
• /
• v.33 no.10
• /
• pp.991-1004
• /
• 2009

Operating experience of the various components in the nuclear power plants has shown that a variety of degradation mechanisms can occur during operation. Therefore, the accurate lifetime evaluation and systematic management are very important for the safe as well as the economical operation of the nuclear power plants. In this paper, the characteristics of a total of 17 degradation mechanisms were reviewed and the plausible degradation mechanisms such as stress corrosion cracking, fatigue, irradiation embrittlement, and so on, were identified. Also, the lifetime evaluation technologies which have been developed for the application to the domestic nuclear power plants are described. In addition, a total of 48 aging management programs which have been established for the safe operation of the various components are explained.

• Proceedings of the KIEE Conference
• /
• 2005.11b
• /
• pp.198-200
• /
• 2005

This paper illustrates the pragram features of reliability evaluation on operation mode (operational planning and operating) of power system. The eighty eight relative reports and papers with seventeen kinds of reliability programs were Investigated in this paper. Two programs, PRA and ASSESS, were focused on the operation mode reliability evaluation program and the comparions of the two program features are introduced.

• Proceedings of the Korean Institute of Navigation and Port Research Conference
• /
• 2004.04a
• /
• pp.385-392
• /
• 2004

The objective of this study is to evaluate the effectiveness of new operation system for port container terminals. We assumed that the operation system of container terminal consists of monitorig ＆ control system, operation system, planning system, and information technology, and we selected total 19 technology alternatives. Through the results of questionnaire and interview received from field expert, we established the evaluation model and analyze the productivity improvement by estimating the weight and the priority of productivity for operation system. From the developed model, we provide useful implications to introduce new technologies of operation system for domestic container terminals.

• Journal of Korean Society of Water and Wastewater
• /
• v.25 no.3
• /
• pp.325-334
• /
• 2011

Market Environment around water work industry is rapidly changing. ISO, International Organization for Standardization, announced the international water work service standard for comparison and evaluation between nations and businesses. And developed countries in water work are introducing market principle for growth of nation's water industry and reinforcement of its competitiveness. Also, some local governments entrusted their water utilities for improvement of competitiveness of water work. However, as some failure cases from overseas came out with emphasis, there are many refuting perspective about entrusted operation achievements of domestic water market. Hence, this paper evaluated competitiveness of domestic local water utilities from the perspective of productivity. After evaluating productivity using Malmquist productivity index, the authors compared and analyzed whether there is a difference of productivity between two different operating types by using Mann-Whitney test. As a result of analysis, it has shown that local water utilities achieved higher productivity at entrusted operation type rather than direct operation type. The local water utilities which chose entrusted operation had increased the productivity 13.9% on total factor productivity(TFP) during experimenting period, while the local water utilities which chose direct operation had increased 0.2%. The background of achieving this high productivity in entrusted operation was analyzed as a result of the higher technological effectiveness of a special water company. The result of this study can be referred when local government needs to decide on what operating types they will use.