• 한국컴퓨터정보학회논문지
• /
• 제23권1호
• /
• pp.1-7
• /
• 2018

The Korean Air Force FA-50 aircraft currently operating in the Air Force is using Ultra High Frequency (UHF) frequency communications for navigation communications with ground control stations or other aircraft. The pilot communicates by changing frequency at any time during flight, and performs communication by directly inputting from the Integrated Up-Front Controller installed in the cockpit. The frequency is designated as secret, and the pilot receives the task with the frequency channel number (001~xxx) and finds the frequency of the channel in the list of 4,000 frequency channels and inputs it manually. This reduces the safety and convenience of pilots' operations and exposes them to hazards that may occur especially during night flight missions. In this paper, we propose a function to embed the frequency corresponding to the frequency channel list in IMDC, the aircraft mission computer, and to automatically change the frequency when the pilot only inputs the channel number.

• 전산구조공학
• /
• 제27권1호
• /
• pp.26-33
• /
• 2014

• Agricultural and Biosystems Engineering
• /
• 제1권1호
• /
• pp.30-37
• /
• 2000

Wet porous media representing agronomic soil that contains variable water content with variable electrolyte concentration was measured to study the shape of the curves of the electric double layer capacitance versus frequency (from 10 KHz to 10 MHz. This was done in an attempt to find the lowest practical operating frequency for developing low cost dielectric constant soil moisture probes. Cellulose sponge was used as the porous media. A high frequency electronic bridge circuit was developed for measuring the equivalent network parallel resistance and capacitance of porous media. It appears that the effects of the electric double layer component of the total parallel network capacitance essentially disappear at operating frequencies greater than approximately 25 MHz at low electrolyte concentrations but are still important at 50 MHz at higher concentrations. At these frequencies, the double layer capacitance masks the diffusion region capacitance where true water content capacitance values reside. The general shape of the curve of volumetric water content versus porous media dielectric constant is presented, with an empirical equation representing data for this type of curve. It was concluded that the lowest frequency where dielectric constant values which represent true water content information will most likely be found is between 30 and 50 MHz at low electrolyte concentrations but may be above 50 MHz when the total electrolyte concentration is near the upper level required for most mesophyte plant nutrition.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2011년도 제42회 하계학술대회
• /
• pp.13-14
• /
• 2011

The power conversion converter for driving the wireless power transfer system is can be into the two part of the DC power conversion rectifier and the high frequency dc-ac power conversion inverter. In this paper, The operating characteristics of the Class-${\Phi}_2$ resonant inverter have been investigated through by simulation and by experiment. It can be switched at a high frequency without the switching losses and the harmonics are reduced effectively due to the input LC filter. Its switching frequency is 1MHz and the input voltage is 96V which is the output voltage of LLC resonant converter. And its output peak voltage is 170V. The resonant inverter module operated at the commercial power source of 220V was built. And also the electromagnetic coupled resonance coils were designed for wireless power transfer with a 1MHz operating frequency. As a experimental result, the wireless power transmission was confirmed and it is varified the validity of the experiment.

• 대한기계학회논문집A
• /
• 제20권2호
• /
• pp.500-510
• /
• 1996

This paper presents a new prototype of an engine mount for a passenger vehicle featuring ER(elector-rheological) fluids and piezoactuators. Conventional rubber mounts and various types of passive or semi-active hydraulic engine mounts have their own functional aims on the limited frequency band in the board engine operating frequency range. However, the proposed engine mount covers all frequency range of the engine operation. A mathematical model of the proposed engine mount is derived using the bond graph method which is inherently domain, the ER fluid is activated upon imposing electric field for vibration isolation while the piezoactuator. Computer control electric fluid for the ER fluid H.inf. cotrol technique is adopted for the piezoactuator. Computer simulation is undertaken in order to demonstrate isolation efficiency of the engine mount over wide operating frequency range.

• 한국위성정보통신학회논문지
• /
• 제1권2호
• /
• pp.89-94
• /
• 2006

OFDM(Orthogonal Frequency Division Multiplexing)방식은 유, 무선 채널에서 고속 데이터 전송에 적합한 방식으로, 최근 활발히 연구되고 있다. 이중 IEEE 802.16에 근거한 WiBro는 OFDM을 핵심기술로 사용하고 있으며, 최근 상용화를 통한 시장 확대를 추진 중에 있다. 이에 따라 가까운 미래에 고속 이동체(KTX, airplane..etc)에서 사용될 경우 OFDM system의 치명적인 단점인 DFS(Doppler Frequency Shift)에 의한 ICI(inter-carrier interference)가 발생할 수 있다. 본문에서는 위성을 통한 OFDM system operating에 있어서 Doppler effects에 대한 새로운 3가지 보상 기법을 제시하고 constellation과 BER curve를 통하여 향상된 성능을 확인한다.

• 제어로봇시스템학회:학술대회논문집
• /
• 제어로봇시스템학회 2005년도 ICCAS
• /
• pp.825-829
• /
• 2005

This paper presents an approach for designing a fuzzy logic-based adaptive SVC damping In controller for damping low frequency power oscillations. Power systems are often subject to low Frequency electro-mechanical oscillations resulting from electrical disturbances. Generally, power system stabilizers are designed to provide damping against this kind of oscillations. Another means to achieve damping is to design supplementary damping controllers that are equipped with SVC. Various approaches are available for designing such controllers, many of which are based on the concepts of damping torque and others which treat the damping controller design as a generic control problem and apply various control theories on it. In our proposed approach, linear optimal controllers are designed and then a fuzzy logic tuning mechanism is constructed to generate a single control signal. The controller uses the system operating condition and a fuzzy logic signal tuner to blend the control signals generated by two linear controllers, which are designed using an optimal control method. First, we design damping controllers for the two extreme conditions; the control action for intermediate conditions is determined by the fuzzy logic tuner. The more the operating condition belongs to one of the two fuzzy sets, the stronger the contribution of the control signal from that set in the output signal. Simulation studies done on a one-machine infinite-bus and a four-machine two-area test system, show that the proposed fuzzy adaptive damping SVC controller effectively enhances the damping of low frequency oscillations.

• 전자공학회논문지C
• /
• 제36C권3호
• /
• pp.35-46
• /
• 1999

디지털 통신 시스템에서 입력 신호의 주파수와 위상 오차를 보정하는 디지털 위상 오차 보상기(derotator)를 CORDIC (COordinate Rotation DIgital Computer) 알고리즘을 이용하는 VLSI로 구현하였다. CORDIC은 주어지는 위상값에 따라 입력 신호를 직접 회전시키므로, 디지털 주파수 합성기 (Direct Digital Frequency Synthesizer)와 복소수 승산기를 이용하는 기존의 구현 방법에 비해 하드웨어 면에서 간단하다. 디지털 위상 오차 보상기는 작은 위상 오차를 누적하므로 arctangent 함수의 선형 근사를 이용한 고속의 CORDIC 알고리즘을 이용하는 기존에 비해 약 24%의 속도 향상이 가능하였다. 본 설계된 IC는 0.6㎛ triple metal 공정을 이용하였으며, 전체 칩 면적은 6.8㎟ , 트랜지스터의 개수는 11,400 개다. 측정 결과 최대 동작 주파수는 25 MHz이다

• 전자공학회논문지D
• /
• 제36D권5호
• /
• pp.36-43
• /
• 1999

새로운 방식의 직접 디지털 주파수 합성기(Direct Digital Frequency Synthesizer, DDFS)의 설계방식을 제시하였다. 배열형 CORDIC(Coordinate Rotate Digital Computer)을 해석함에 있어서 오차의 크기를 계산하였다. 오차에는 계산회수의 부족에서 발생하는 ‘반복회수오차’와 제한된 데이터 비트수를 사용함으로써 계산에 사용하지 못하는 유효숫자 이하를 버림으로써 발생하는‘절단오차’로 분류할 수 있다. 실제로 각 비트별로 오차를 측정해 보면 8비트시 7단, 16비트시 12단, 24비트시 20단으로 근최적화된 파이프라인 단수를 얻을 수 있었다. 이 DDFS는 FPGA칩으로 구현되었고, 측정결과 235MHz의 구동 클럭에서 안정된 동작을 보였으며, 11.75MHz의 최대 출력 주파수를 발생시켰다. 위상별 진폭값을 ROM에 저장하는 기존의 방식에 비하여, 보다 높은 정밀도와 처리속도를 보이며, 제조공정 역시 단순해 질 것이다. 특히 같은 비트를 채택한 경우 롬방식에 비하여 5배정도의 높은 정밀도를 얻었다.

• Journal of Biosystems Engineering
• /
• 제40권1호
• /
• pp.1-9
• /
• 2015

Purpose: The objective of this study was to understand the operating mechanism of the rock-drill drifter, to explain how to setup an experimental test system and measure the strain of the drifter's rod, and to evaluate the drifter's performance with respect to the impact energy and blow frequency. Methods: The structure of the rock-drill drifter and its operating principle regarding the impact process were analyzed. Static calibration was carried out to calculate the correction factor using a drifter rod as the first step of the experimental test. The impact energy and blow frequency were then calculated based on strain measurements of the drifter's rod. Results: Experimental results showed that the tested drifter elicited a blow frequency of 3330 BPM (Blows Per Minute) and generated impact energy of 170 J/blow. This indicates that the drifter elicits a higher percussion speed and results in a lower impact energy compared to the hydraulic breaker at the same input power. Conclusions: The study proposed methodologies that deal with the experimental setup and the evaluation of the performance of the rock-drill drifter. These methodologies can be extensively used for validating and improving the percussion performance of the drilling equipment.