• 한국군사과학기술학회지
• /
• 제20권2호
• /
• pp.187-196
• /
• 2017

The size of raw data has dramatically increased due to the recent trend of Synthetic Aperture Radar(SAR) development plans for high resolution and high definition image acquisition. The large raw data has an impact on satellite operability due to the limitations of storage and transmission capacity. To improve the SAR operability, the SAR raw data shall be compressed before transmission to the ground station. The Block Adaptive Quantization (BAQ) algorithm is one of the data compression algorithm and has been used for a long time in the spaceborne SAR system. In this paper, an optimization method of BAQ threshold table is introduced using real SAR raw data to prevent the degradation of signal quality caused by data compression. In this manner, a new variation estimation strategy and a new threshold method for block type decision are introduced.

• Journal of Communications and Networks
• /
• 제11권6호
• /
• pp.615-625
• /
• 2009

Worldwide inter-operability for microwave access (WiMAX) is a promising technology that provides high data throughput with low delays for various user types and modes of operation. While much research had been conducted on physical and MAC layers, little attention has been paid to a comprehensive and efficient security solution for WiMAX. We propose a hybrid security solution combining identity-based cryptography (IBC) and certificate based approaches. We provide detailed message exchange steps in order to achieve a complete security that addresses the various kind of threats identified in previous research. While attaining this goal, efficient fusion of both techniques resulted in a 53% bandwidth improvement compared to the standard's approach, PKMv2. Also, in this hybrid approach, we have clarified the key revocation procedures and key lifetimes. Consequently, to the best of knowledge our approach is the first work that unites the advantages of both techniques for improved security while maintaining the low overhead forWiMAX.

• 제어로봇시스템학회논문지
• /
• 제5권6호
• /
• pp.753-763
• /
• 1999

The existing SCADA(Supervisory Control and Data Acquisition) system software is usually developed to suitable for the specific hardware platforms. However, as per rapid improvement of computer performance and development of network technology, it is required to support scalability and inter-operability in existing different SCADA systems. In order to meet such requirements, in this paper, we propose a new type of SCADA testbed using Java for electric distribution applications. The system consists of three modules; development support tools, client and server modules. The basic architecture of the proposed SCADA system is similar to existing one, however, we improve the function of MTU and MMI interface to facilitate LAN and WAN environment. Also, the proposed system can deals with alarm and history data by using heterogeneous DBMS. Since the system is built in Java environment, the development cost is cheap and it can support sacalability and portability. Our experience can be utilized to develop next generation of small and medium size of SCADA system.

• 품질경영학회지
• /
• 제45권3호
• /
• pp.393-401
• /
• 2017

Purpose: The purpose of this study is to propose retrofit measures for KDX-II KVLS hull crack, also, enhance safety and quality of ship. Also, this study suggest to how to retrofit about hull crack of the ship and how to improve operability of the ship. Methods: Retrofit measures of KDX-II KVLS hull crack reach a conclusion through global structure analysis and fatigue analysis. Concerned about thermal deformation due to welding around the KVLS, in addition to, verify to safety of KVLS. Results: Based on result of global structure analysis establish retrofit measures for KDX-II KVLS hull crack. Additionally, through fatigue analysis establish final retrofit measures. The results of retrofit measures are allowed both stress level and fatigue life. Conclusion: Retrofit measures for ship hull crack based on global structure analysis and fatigue analysis improves operability and quality of the ship. Especially, KDX-II ship is the best battleship in our country. Considering the importance of KDX-II, this study improves both Korea navy's combat power and ability to carry out the mission.

• 한국통신학회논문지
• /
• 제37C권11호
• /
• pp.1129-1137
• /
• 2012

전술데이터링크체계의 무선네트워크(이후 무선링크로 언급)는 전술자료를 실시간으로 공유할 수 있도록 디지털화된 전술통신 네트워크를 제공하는데 그 목적이 있다. 무선링크의 다중접속방식은 신뢰성 높은 실시간 전술자료의 교환을 위하여 설치 대상 노드의 운용환경에 따라 시분할다중접속방식(TDMA, Time Division Multiple Access)과 반송파 감지 다중접속방식(CSMA, Carrier Sense, Multiple Access)으로 운용된다. 본 논문에서는 기본적으로 TDMA로 설계된 시스템에서 MIL-STD-188-220 기반 CSMA를 운용하고자 할 때 그 운용 가능성을 검증하였으며, 이를 위한 확률적 분석기법을 제안한다. 그리고 실제장비에 기술 구현 후 그 성능을 이론치와 비교 분석하였다.

• International Journal of Naval Architecture and Ocean Engineering
• /
• 제4권4호
• /
• pp.488-503
• /
• 2012

The stern boat deployment system was investigated to evaluate the capability of launching and recovering rigid hull inflatable boat (RHIB) via the stern ramp. The main parameters to launch and recover RHIB were tested at the design stage. The combined hydrodynamic effect of the stern wake and the water jet flow made it difficult to maintain the maneuvering and sea-keeping ability of RHIB approaching to the stern ramp. The safe recovery course was proposed to maintain the directional control of RHIB and to reduce the combined hydrodynamic effect in the transom zone. To evaluate the feasibility of RHIB recovery, the stern sill depth was measured in various conditions and the ramp availability time was obtained. Also, the experimental percent time operability (PTO) test was performed by the number of successive launching and recovering operations.

• 한국철도학회논문집
• /
• 제8권6호
• /
• pp.533-538
• /
• 2005

In this paper we identity the hazard using HAZOP study for ATSRX which is a subsystem of the ATP system, and we study a safety management method for the mitigation of the risk to the acceptable level. ATSRX is a device that make a train which has a ATP system operate in ATS line. For this ATSRX send a induction signal with ATS system to vehicle controller. Thus ATSRX can be said a safety equipment that makes a train operate safely. In order to identify the hazard for the internal faults in ATSRX system, we employ HAZOP study method which is recommended as hazard identification in IEC 62278, RAMS requirements in railway signal, and also it provide the detail activity in IEC 61882. Thus, in this paper we perform HAZOP study based on ATSRX related standards and using the assessment of the identified hazard we study a method to guarantee the system safety through the change of the design to mitigate the risk to the acceptable level.

• 대한교통학회지
• /
• 제19권6호
• /
• pp.19-31
• /
• 2001

우리 나라 환경에 적합한 국가 지능형 교통체계(ITS: Intelligent Transportation Systems)의 구현을 위한 국가 아키텍쳐 수립연구가 국토연구원과 관련 학계와 산업계의 협동연구로 지난 3년간 수행되어 천여 페이지에 달하는 국가 아키텍쳐가 수립된 바 있다. 본 논문에서는 이를 위해서 고안된 도메인 수준과 논리 수준 및 물리 수준의 아키텍쳐 모형과 방법론을 제시한다. 도메인 수준의 아키텍쳐는 ITS를 구현함에 있어 관계되는 영역간의 국가적 협동체계를 이룩하기 위한 국가적 기본 틀이고 논리수준의 아키텍쳐는 서비스의 중복/사각/상충을 방지하기 위한 국가적 기본 틀이며 물리수준의 아키텍쳐는 서비스 시스템을 구축함에 있어 물리적 정보기술 자원을 효율적으로 할당하여 시스템 구축의 경제성과 효율성을 도모하기 위한 시스템의 물리적 구성 틀이다. 이를 위한 모델과 기법은 고전적 컴퓨터 기반 시스템공학에서의 프로세스 지향적 사고와 기법을 수정 보완하고 확장한 것으로 고 수준(High Level)에서의 아키텍쳐 구상에 적절한 것이다. 저 수준(Low Level)의 아키텍쳐는 설계 수준에서 이루어지는 것으로 전제하였다.

• International Journal of Naval Architecture and Ocean Engineering
• /
• 제13권1호
• /
• pp.734-745
• /
• 2021

In order to achieve a good and competitive FPSO design, the building cost and the motion performances are the two most critical and conflicting KPIs to be considered. In this study, the author's previous work (Lee, et al., 2021) on the optimization of an FPSO's hull dimensions with 1800 MBBLs storage capacity at Brazil field was extended using a multi-objective parametric optimization with the hull steel weight and the operability which are closely related to the building cost and the operational cost during the lifetime, respectively. For the purpose of more realistic and practical FPSO design, the constraints related to crew comfort and the safe helicopter take-off and landing operation were newly added. Also, the green water on deck was calculated accurately to check the suitability of the designed freeboard height using a newly developed real-time calculation module for the relative wave elevations. With aids of this updated optimization formulation, we presented multiple optimal FPSO dimensions expressed as a Pareto set which aids FPSO designers to conveniently select the practical and competitive dimensions. The excellence of the developed approach was verified by comparing the optimization results with those of FPSOs dimensioned for operation at West Africa and Brazil field.

• International Journal of Naval Architecture and Ocean Engineering
• /
• 제13권1호
• /
• pp.478-492
• /
• 2021

In this study, hull dimensions of an FPSO were optimized to maximize its operability at Brazil field. In contrast with the previous works which have used simplified models to evaluate some indicators related to stability and hydrodynamic performances of FPSOs for its own optimal design, we developed a generic hull and compartment modeler and sophisticated stability and hydrodynamic calculation modules. With the aid of the developed tools, the hull optimization was performed with initial dimensions of an FPSO originally designed for west Africa field. The optimization results indicated the relative importance of hydrodynamic performances compared with stability performances for the FPSO hull dimensioning by showing that there were 3 active constraints related to them, which were the natural periods of heave and roll and the maximum pitch angle under 1-year return period waves at full load condition. To the author's knowledge, this study is the first attempt to combine altogether the hull and compartment modeling and full set of stability and hydrodynamic calculations precisely to optimize an FPSO's hull dimensions within 30 min. Also, it is worthwhile to mention that the developed methods are generic enough to be applied to all types of ship-shaped offshore platforms.