• 한국정보통신학회:학술대회논문집
• /
• 한국정보통신학회 2012년도 춘계학술대회
• /
• pp.270-273
• /
• 2012

본 논문에서는 비행 운용 프로그램(Operational Flight Program, OFP)의 성능 향상을 위하여 멀티코어 기법을 적용한 임무 컴퓨터(Mission Computer, MC)와 OFP의 디자인에 대해 기술하였다. 우선 멀티 코어 환경에서 태스크로 지정된 영역의 프로그램을 병렬 프로그램의 표준인 오픈엠피(OpenMp)를 사용하여 지정된 코어에서 제어하는 기법을 설계하여, 이를 적용한 멀티 코어 프로그램(Mulit-Core Program, MCP)과 싱글 코어 프로그램(Single-Core Program, SCP)의 성능의 차이점에 대해 기술하였다. 항공기의 임무 컴퓨터 내에 멀티 코어를 지원하는 프로세서(General Processor Module, GPM)에 탑재되는 OFP중, 항법, 통신, 피아식별등의 비행 정보를 조종사에게 제공 및 제어하도록 설계된 전방 상향 제어 비행운용 프로그램(Integrated Up-Front Control OFP, IUFC OFP)의 성능 향상을 위한 멀티 코어 설계 기법을 제시 하였다.

• 대한두개안면성형외과학회지
• /
• 제14권2호
• /
• pp.81-88
• /
• 2013

Background: To suggest the need of more aggressive reduction techniques than closed reduction (CR) technique in nasal fracture treatment, we identified the usefulness of algorithm oriented treatment of nasal fracture that includes indirect open reduction (IOR) and external fixation (EF) as well as the CR. Methods: We compared the clinical course of the group A (n=128) where only the CR was performed regardless of the pattern of the nasal fracture and the group B (n=127) where algorithm oriented treatment including IOR and EF as well as CR was performed depending on the pattern of nasal fracture. And the degree of postoperative pain after CR and IOR technique was compared through the dose of analgesics and pain scores. Results: More than 80% of patients were satisfied the result of reduction in both group A and B. Good contour of nasal bone after reduction was showed 71% of group A and 81% of group B without significant difference. Minor (p>0.05) and major (p<0.05) deformity after reduction were less occurred in the group B than group A. Postoperatively, the dose of analgesics was significantly lower after IOR technique than CR technique (53 mg vs. 142 mg) (p<0.05). Conclusion: Algorithm oriented treatment of nasal fracture including IOR and EF as well as CR reduce major deformity after reduction than treatment of CR alone. It is useful to perform the more aggressive reduction techniques such as IOR and EF according to the pattern of fracture in treatment of nasal fracture.

• 한국공작기계학회논문집
• /
• 제16권5호
• /
• pp.1-6
• /
• 2007

This paper presents a new experimental Servo-Parameter tuning technique for a 6-axes articulated robot manipulator, especially considering robot's dynamics. First of all, investigation for proportional gain of velocity control loop by using a Dynamic Signal Analyzer(DSA) is performed. Using the FUNCTION characteristic of DSA based on the Bode plot, the Bode plot of open loop transfer function can be obtained. In turn, the integral gain of a servo controller can be found out by using the integration time constant extracted from the Bode plot of open loop transfer function. In the meanwhile, the positional gain of the servo controller can be obtained by using the Bode plot of the closed loop transfer function. Using the experimental gain tuning technique proposed in this paper, the testing linear motion of DR6-II robot has been shown to be more accurate rather than the motion with a conventional(empirical) gain tuning technique in Doosan Mecatec Co., Ltd., by improving the dynamic response of the robot as well as synchronizing each joint velocity according to the positional command of an end-effector.

• 환경영향평가
• /
• 제22권3호
• /
• pp.277-290
• /
• 2013

This study was carried out to propose the new procedure to apply Habitat Evaluation Procedure(HEP) of target species using delphi technique, which is suitable to develop endangered species with few researches and ecological knowledges. To identify habitat quality of specific species in development project site, we can develop habitat model and create habitat suitability maps. In this study, we select the Common Kestrel(Falco tinnunculus) as target species in four areas(Paju, Siheung, Ansan, Hwaseong) which is located near the Seoul metropolitan area. The Delphi technique was selected to get the reliable information on the species and habitats requirements. Through the delphi approach, seven habitat components were determined as suitable variables for the Common Kestrel: density($n/km^2$) of small mammals, area($km^2$) of bare-grounds, pasturelands and riparian, and open area(%), spatial distribution and area of croplands, landscape diversity, breeding sites(tall trees, cliffs, high-rise buildings), and the length of shelf. Habitat variables used in this model were classified into two categories: % of suitable land-cover type(open areas, croplands, pasturelands, wetlands, and baregrounds) and the quality of feeding sites(within 250m from edges of woodlands). Habitat quality of the Common Kestrel was assessed against occurred sites derived from the nationwide survey. Predicted habitat suitability map were closely related to the observed sites of the endangered avian species in the study areas. With the habitat suitability map of the Common Kestrel, we assess the environmental impacts with habitat loss after development project in environmental impact assessment.

• Maxillofacial Plastic and Reconstructive Surgery
• /
• 제27권2호
• /
• pp.164-170
• /
• 2005

The purpose of this study was to compare a sample of patients who had condylar fractures treated with open reduction using different plating techniques, to evaluate which plating technique is useful for stable fixation for fractures of the mandibular condyle and to evaluate effectiveness of resorbable miniplate. There were 60 patients (41 males, 19 females) whose condylar fractures were treated with open reduction. Rigid fixation was performed with a single miniplate, double miniplate ot one miniplate & one microplate and single resorbable plate. All patients remained intermaxillary fixation for 1 week postoperatively. Active physiotherapy was started after 2 weeks postoperatively. Radiographic evaluation (plate fracture, plate bending, screw loosening, displacement of condyle etc.) was performed at pre-operative, immediate, 2 weeks, 1 month, 3 months, 6 months after surgery. Clinical evaluation included degree of mouth opening, occlusion, mandibular lateral excursion, infection and facial nerve paralysis. In radiographic evaluation, displacement of fractured condylar segment associated with plate bending or screw loosening were showed 6 cases and 3 cases for single miniplate system and resorbable miniplate system. There was no patients who have this problem on double miniplate system. The results revealed that the application of two miniplates were more recommendable than single miniplates. When we select resorbable miniplate system, we should consider the type of fractures, post-operative treatment protocol and surgical technique.

• Clinics in Shoulder and Elbow
• /
• 제24권4호
• /
• pp.209-214
• /
• 2021

Background: The treatment for acromioclavicular joint injuries (ACJI) ranges from a conservative approach to extensive surgical reconstruction, and the decision on how to manage these injuries depends on the grade of acromioclavicular (AC) joint separation, resources, and skill availability. After a thorough review of the literature, the researchers adopted a simple cost-effective technique of AC joint reconstruction for acute ACJI requiring surgery. Methods: This was a prospective single-center study conducted between April 2017 and April 2018. For patients with acute ACJI more than Rockwood grade 3, the researchers performed open coracoclavicular ligament reconstruction using synthetic sutures along with an Endobutton and a figure of 8 button plate. This was followed by AC ligament repair augmenting it with temporary percutaneous AC K-wires. Clinical outcomes were evaluated using the Constant Murley shoulder score. Results: Seventeen patients underwent surgery. The immediate postoperative radiograph showed an anatomical reduction of the AC joint dislocation in all patients. During follow-up, one patient developed subluxation but was asymptomatic. The mean follow-up period was 30 months (range, 24-35 months). The mean Constant score at 24 months was 95. No AC joint degeneration was noted in follow-up X-rays. The follow-up X-rays showed significant infra-clavicular calcification in 11 of the 17 patients, which was an evidence of a healed coracoclavicular ligament post-surgery. Conclusions: This study presents a simple cost-effective technique with a short learning curve for anatomic reconstruction of acute ACJI. The preliminary results have been very encouraging.

• Journal of Power Electronics
• /
• 제12권1호
• /
• pp.120-127
• /
• 2012

Fault diagnosis technique of electrical drives is becoming more and more important, since voltage fed converter system has become industrial standard in many applications. Many studies have been conducted an inverter fault diagnosis for induction motors. However, there are few researches about fault diagnosis of 3-phase ac/dc PWM (Pulse Width Modulation) converter compared to the dc/ ac inverter. The ac/dc converter is the opposite of dc/ac inverter at current flow. Also, inverter and converter have different current patterns under the same condition of IGBT (Insulated gate bipolar transistor) open switch fault. Therefore, it is difficult to apply intact diagnosis methods of inverter to the converter. This paper proposes modified fault detection methods for IGBT open switch fault in 3-phase ac/dc PWM converter by modifying established fault diagnostic methods for dc/ac inverters.

• Journal of Chest Surgery
• /
• 제45권6호
• /
• pp.390-395
• /
• 2012

Background: Conventional open repair is a suboptimal therapy for blunt traumatic aortic injury (BTAI) due to the high postoperative mortality and morbidity rates. Recent advances in the thoracic endovascular repair technique may improve outcomes so that it becomes an attractive therapeutic option. Materials and Methods: From August 2003 to March 2012, 21 patients (mean age, 45.81 years) with BTAI were admitted to our institution. Of these, 18 cases (open repair in 11 patients and endovascular repair in 7 patients) were retrospectively reviewed and the early perioperative results of the two groups were compared. Results: Although not statistically significant, there was a trend toward the reduction of mortality in the endovascular repair group (18.2% vs. 0%). There were no cases of paraplegia or endoleak. Statistically significant reductions in heparin dosage, blood loss, and transfusion amounts during the operations and in procedure duration were observed. Conclusion: Compared with open repair, endovascular repair can be performed with favorable mortality and morbidity rates. However, relatively younger patients who have acute aortic arch angulation and a small aortic diameter may be a therapeutic challenge. Improvements in graft design, delivery sheaths, and graft durability are the cornerstone of successful endovascular repair.

• 복식
• /
• 제38권
• /
• pp.369-392
• /
• 1998

In order to identify and describe the central core of fashion desire, the concept of“anti-aesthetics”and“open fashion”were analyzed based on the discourses of postmodernism dis-cussed in the field of sociology, culture, art and philosophy. In this paper, first, the new perspectives of fashion related to modernism and postmodernism were proposed, open concept, anti-aesthet-ics which is ephemerality but eternal ideology. Key principles of postmodernism as anti-aess-thetics mean the philosophy of nihilism proposed by Nietzsche indeterminency, the endd of original art(the death of art), the sublimity provided by Lyotard, and the pluralism to release human from the closed way of thinking, value, ideology. Second, the old and classical definition of fashion,“the differentiation of class”proposed by Veblen and Simmel has been changed into the“differentiation of taste”in postmodern condition. Third, the dichotomous system, that is, ration vs emotion, soul vs body, male vs female, culture vs nature, and so on has been deconstructed and disolved in the postmodern fashion phenomenon using the technique of anti-formalism, such as pastich, parody, bricolage an kitsch for the expression of sublimity and freedom of human.

• 한국전자거래학회지
• /
• 제23권1호
• /
• pp.37-45
• /
• 2018

현재 프로그램이 운용되는 시스템은 기존의 싱글코어 및 멀티코어 환경을 넘어서 매니코어, 부가 프로세스 및 이기종 환경까지 그 영역이 확장되고 있는 중이다. 하지만, 기존 연구의 경우 NVIDIA 벤더에서 나온 아키텍쳐 및 CUDA로의 병렬화가 주로 이루어졌고 AMD에서 나온 범용 GPU 아키텍쳐인 GCN 아키텍쳐에 대한 성능향상에 관한 연구는 제한적으로 이루어졌다. 이런 점을 고려해 본 논문에서는 GCN 아키텍쳐의 GPGPU 환경인 OpenCL 내에서의 성능향상 기법에 대해 연구하고 실질적인 성능향상을 보였다. 구체적으로, 행렬 곱셈과 컨볼루션을 적용한 GPGPU 프로그램을 본 논문에서 제시한 성능향상 기법을 통해 최대 30% 이상의 실행시간을 감소시켰으며, 커널 이용률 또한 40% 이상 높였다.