• International Journal of Control, Automation, and Systems
• /
• 제5권1호
• /
• pp.24-34
• /
• 2007

Closed-loop active twist control of integral helicopter rotor blades is investigated in this paper for reducing hub vibration induced in forward flight. A four-bladed fully articulated integral twist-actuated rotor system has been designed and tested successfully in wind tunnel in open-loop actuation. The integral twist deformation of the blades is generated using active fiber composite actuators embedded in the composite blade construction. An analytical framework is developed to examine integrally twisted helicopter blades and their aeroelastic behavior during different flight conditions. This aeroelastic model stems from a three-dimensional electroelastic beam formulation with geometrical-exactness, and is coupled with finite-state dynamic inflow aerodynamics. A system identification methodology that assumes a linear periodic system is adopted to estimate the harmonic transfer function of the rotor system. A vibration minimizing controller is designed based on this result, which implements a classical disturbance rejection algorithm with some modifications. Using the established analytical framework, the closed-loop controller is numerically simulated and the hub vibratory load reduction capability is demonstrated.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2001년도 춘계학술대회 논문집 전기기기 및 에너지변환시스템부문
• /
• pp.240-243
• /
• 2001

This paper presents the digital controller using variable gain for single-phase power factor correction (PFC) converter. Generally, the gain of inner current control loop in single-stage PFC converter has a constant magnitude. This is why input current is distorted under low input voltage. In particular, a digital controller has more time delay than an analog controller which degrades characteristics of control loop. So, it causes the problem that the gain of current control loop isn't increased enough. In addition, the oscillation happens in the peak value of the input voltage open loop PFC system gain changes according to ac input voltage. These aspects make the design of the digital PFC controller difficult. In this paper, the improved digital control method for single-phase power factor converter is presented. The variable gain according to input voltage and input current help to improve current shape. The 800W converter is manufactured to verify the proposed control method.

• 전력전자학회논문지
• /
• 제13권6호
• /
• pp.403-410
• /
• 2008

본 논문에서는 벡터제어에 필요한 유도전동기의 상수를 정지 상태에서 부가적인 신호 주입을 이용하여 추정하는 방법을 제안하였다. 농형 유도전동기 회전자 바의 표피효과를 수학적으로 모델링을 하고 분석하였다. 상수 추정을 위해 정지 상태에서 두 가지의 서로 다른 주파수의 신호를 주입한다. 전동기의 초기 상수를 알지 못하므로 개-루프 전압 주입방법 대신 폐-루프 전류제어 방법을 이용한다. 이 방법은 전기적 사고를 미리 방지할 수 있으므로 개-루프 전압 주입방법 보다 안전하다. 그리고 유도전동기의 상수 추정에 심각한 영향을 주는 위상지연효과를 보상하기 위한 오프라인 시험방법을 제안하였다. 그리고 제안된 상수 추정 방법의 타당성을 증명하기 위해 세 가지 용량의 유도전동기에 대해 실험을 수행하였다.

• 한국태양에너지학회 논문집
• /
• 제32권spc3호
• /
• pp.245-254
• /
• 2012

In photovoltaic system, the characteristics of photovoltaic module such as open circuit voltage and short circuit current will be changed because of cell temperature and solar radiation. Therefore, the boost converter of a PV system connects between the output of photovoltaic system and DC link capacitor of grid connected inverter as controlling duty ratio for maximum power point tracking(MPPT). This paper shows the dynamic characteristics of the boost converter by comparing single-loop and two-loop control algorithm using both analog and digital control. Both proposed compensation methods have been verified with computer simulation to demonstrate the validity of the proposed control schemes.

• 제어로봇시스템학회:학술대회논문집
• /
• 제어로봇시스템학회 2002년도 ICCAS
• /
• pp.39.3-39
• /
• 2002

In this paper, presented is a feedback control loop, for an in-plane gimbaled micro gyroscope based on methodology and state weighted model reduction technique. The micro gyroscope is the basic inertial sensors. To improve the performances such as stability, wide dynamic range, bandwidth and especially robustness, it is necessary to design a feedback control loop, which must be robust, because the manufacturing process errors can be large. Especially, to obtain wide bandwidth, the feedback controller is indispensable, because the gyroscope is high Q factor system and has small open loop bandwidth. Moreover, the feedback controller reduces the effect...

• 정보처리학회논문지A
• /
• 제8A권2호
• /
• pp.167-178
• /
• 2001

This paper presents a new methodology for specification and control of the motion of an articulated rigid body for the purposes of animation by coordinate transformations. The approach is to formulate the problem as a coordinate transformation from the joint space of the body to a user-defined animation space which is chosen for convenience in constraining the motion. Constraints are applied to the resulting coordinate transformation equations. It is sufficiently general so that it can be applied to all common types of control problems, including closed loop as well as open loop mechanisms. We also provided a new approach to simulate a closed loop mechanism, which is using animation space transformation technique. The method is formulated in detail and is demonstrated by animating the motion of an inchworm.

• 한국추진공학회지
• /
• 제24권2호
• /
• pp.52-60
• /
• 2020

본 논문에서는 개방형 액체로켓엔진의 제어 알고리즘을 다룬다. 이를 위해 엔진의 각 구성품들을 기준으로 수학적 모델링을 하였으며 추력제어를 위하여 연소실 압력을 피드백하여 제어시스템을 구축하였다. 제어시스템을 위하여 최대추력 상태에서 선형 모델을 이용하여 최적 출력피드백 LQ 추종 제어기를 설계하였으며 시뮬레이션을 통해 제어기의 성능을 검증하였다.

• 제어로봇시스템학회논문지
• /
• 제6권4호
• /
• pp.313-319
• /
• 2000

As the interest of flexible manufacturing systems and computer integrated manufacturing systems increase, the distribution of centralized control systems using industrial control networks is getting more attention. In this paper, we investigate the rate-based traffic control of industrial control networks to improve the performance regarding the throughput, fairness, and error rates. Especially, we consider the protocol of Lon-$Works^{(TM)}$ which consists of all OSI 7-layers and supports various communication media at a low cost. Basically, the proposed rate-based traffic control system is closed loop by utilizing the feedback channel errors, which shows improved performance when compared with other industrial control networks commonly operated in open loop. To this end, an additional network node called monitoring node is introduced to check the channel status without increasing the channel load. The Proposed control loop is in effect whenever the feedback channel error becomes greater than an admittable value. We demonstrate the improved performance of the controlled network system in view of throughput and fairness measures by implementing the lab-scale network system based on LonWorks and through the experimentation upon it.

• 제어로봇시스템학회:학술대회논문집
• /
• 제어로봇시스템학회 2000년도 제15차 학술회의논문집
• /
• pp.465-465
• /
• 2000

The paper presents the fuzzy control technique to adjust the gain schedule in the fuzzy controller. The micro computer is designed to the fuzzy controller to execute the proportional gain with the data of the error and speed command. The gain schedule is the fuzzy set which execute based on the fuzzy rule. The gain schedule from the fuzzy controller is fed to the sinusoidal pulse width modulation (SPWM) inverter for control the response and speed of the induction motor. The induction motor coupling to the DC motor and tachogenerator which DC motor as a load. The test result of the fuzzy control technique in the open loop control, it provides a good response and in the closed loop control it can control speed in the any condition of load design

• Journal of Power Electronics
• /
• 제13권4호
• /
• pp.679-691
• /
• 2013

High-power electromagnetic transmitter power supplies are an important part of deep geophysical exploration equipment. This is especially true in complex environments, where the ability to produce a highly accurate and stable output and safety through redundancy have become the key issues in the design of high-power electromagnetic transmitter power supplies. To solve these issues, a high-frequency switching power cascade based emission power supply is designed. By combining the circuit averaged model and the equivalent controlled source method, a modular mathematical model is established with the on-state loss and transformer induction loss being taken into account. A triple-loop control including an inner current loop, an outer voltage loop and a load current forward feedback, and a digitalized voltage/current sharing control method are proposed for the realization of the rapid, stable and highly accurate output of the system. By using a new algorithm referred to as GAPSO, which integrates a genetic algorithm and a particle swarm algorithm, the parameters of the controller are tuned. A multi-module cascade helps to achieve system redundancy. A simulation analysis of the open-loop system proves the accuracy of the established system and provides a better reflection of the characteristics of the power supply. A parameter tuning simulation proves the effectiveness of the GAPSO algorithm. A closed-loop simulation of the system and field geological exploration experiments demonstrate the effectiveness of the control method. This ensures both the system's excellent stability and the output's accuracy. It also ensures the accuracy of the established mathematical model as well as its ability to meet the requirements of practical field deep exploration.