• 한국동물위생학회지
• /
• 제36권3호
• /
• pp.217-222
• /
• 2013

In this study, we compared nutrient content emphasized on labelling of processed milks with that of whole milks and evaluated how well they conform to labelling standard. A total of 98 samples (33 whole milks, 28 calcium fortified milks, 30 low-fat milks and 7 lactose hydrolyzed milks) were collected in hypermarkets in Seoul from August 28 to August 30 in 2012. Calcium, fat and lactose contents were tested in the samples. Calcium contents ranged 102.2~113.0 mg/100 mL in whole milks and 120.1~337.8 mg/100 mL in calcium fortified milks. The level of calcium contents in fortified milks ranged very broad. Accordingly, the standard of calcium contents on fortified milks will be required. Fat contents ranged 3.1~3.9 g/100 mL in whole milks and 0.1~1.9 g/100 mL in low-fat milks. The average of fats content in low-fat milks was nearly one third than whole milks. Lactose contents was ranged 4.6~5.1 g/100 mL in whole milks and not detected in lactose hydrolyzed milks. All of processed milks were suitable to processing standard and labelling standard. But nutrition claims often used on processed milk such as "High" or "Low" were not adequate to indicate the exact nutrient content, which is a cause of the confusion for milk product labelling to consumers. We need a lot of research about nutrient labelling that can deliver appropriate and understandable information to customers.

• 농촌의학ㆍ지역보건
• /
• 제2권1호
• /
• pp.36-42
• /
• 1977

A study on blood pressure and hematocrit values of 1,559 people in 19 Korean rural areas was carried out in 1974 and the results were analyzed statistically. Obtained as follows: 1. The blood pressure according to sex and age groups (from the twenties to the seventies) was as follows: 1) The blood pressure of male by age group il) In the twenties, M (mean) was 125. 85/74, 15mm/Hg, a (standard deviation) was 15.9/10.2, and ill (standard error) was 1.55/0.99. (2) In the thirties, ${\delta}$ was 123.93/77.19 mm/Hg, a was 14.4/10.8, and m was 1.24/0.93. (3) In the forties, M was 128.44/81.15 mm/Hg, a was 23.9/14.7, and m was 2.16/1.33. (4) In the fifties, M was 128.48/181.24 mm/Hg, a was 24.7/13.9, and m was 2.05/1.16. (5) In the sixties, M was 135.80/81.70 mm/Hg, a was 27.4/18.8, and ${\delta}$ was 2.74/1.88. (6) In the seventies, M was 146.84/83. 16mm/Hg, ${\delta}$ was 24.5/10.0, and m was 5.62/2.30. 2) The blood pressure of female by age group (1) In the twenties, M was 117.89/73.33 mm/Hg, ${\delta}$ was 15.7/12.1, and m was 1.42/1.09. (2) In the thirties, M was 118.04/75.71 mm/Hg, ${\delta}$ was 16.9/13.0, and m was 1.13/0.87. (3) In the forties, M was 120.92/78.17 mm/Hg, ${\delta}$ was 20.9/12.9, and m was 1.42/0.87. (4) In the fifties, M was 122.14/79.55 mm/Hg, ${\delta}$ was 24.2/15.9, and m was 1.63/1.07. (5) In the sixties, M was 131.57/84.29 mm/Hg, ${\delta}$ was 28.4/16.9, and m was 2.58/1.53. (6) In the seven ties, M was 139.62/86, 54 mm/Hg, ${\delta}$ was 22.4/15.7, and m was 4.38/3.09. And the range of systolic blood pressure in male was 70~230 mm/Hg and in female was 80-230 mm/Hg. The range of distolic blood pressure in male was 50~160 mm/Hg and in female was 40~140 mm/Hg. 2. The hematocrit value according to sex and age groups was as follows: 1) The hematocrit values of male by age group (1) In the twenties, M was 42.72%, ${\delta}$ was 3.05, and m was 0.30. (2) In the thirties, M was 41.77%, ${\delta}$ was 3.29, and m was 0.28. (3) In the forties, M was 41.39, ${\delta}$ was 3.86, and m was 0.35. (4) In the fifties, M was 40.12%, ${\delta}$ was 3.65, and m was 0.30. (5) In the sixties, M was 39.88%, ${\delta}$ was 3.81. and m was 0.38. (6) In the seventies, M was 38.47%, ${\delta}$ was 2.27, and m was 0.52. 2) The hematocrit values of female by age group (1) In the twenties, M was 35.40%, ${\delta}$ was 3.37, and m was 0.30. (2) In the thirties, M was 35.50%, ${\delta}$ was 3. 35, and m was 0.22. (3) In the forties, M was 35.75%, ${\delta}$ was 3. 18, and m was 0.22. (4) In the fifties, M was 35.84%, ${\delta}$ was 3.30, and m was 0.22. (5) In the sixties, M was 35.70%, ${\delta}$ was 3.35, and m was 0.30. (6) In the seventies, M was 35.08%, ${\delta}$ was 3.08, and m was 0.60. The range of hematocrit values in male was 23~50% and in female was 18~50% (un associated with age groups). 3. In comparison with the blood pressure and the value of hematocrit of study groups showed that the blood pressure raised higher but the value of hematocrit got lowered on the contrary as the groups are getting older. 4. Total number of patients with hypertension was 165(10.6%) which were consisted with 71 male (11.3%) and 94 female (10.1%). But only two cases of the male patient and one case of the female patient were associated with protein uria. 5. The incidence of anemia by hematocrit values was as follows: 1) The incidence of male anemia patients based on$\leqq$41% ($\leqq$39%). (1) In the twenties, incidence was 43.90% (16.98%). (2) In the thirties, 41.48% (25.93%). (3) In the forties, 42.62% (25.41%). (4) In the fifties, 62.76% (40.69%). (5) In the sixties, 70% (38%). (6) In the seventies, 84.21% (73.68%). 2) The incidence of female anemia patients bailed on $\leqq$35% ($\leqq$34%). (1) In the twenties, incidence was 43.90% (37.39%). (2) In the thirties, 48.21 % (33.93%). (3) In the forties, 43.58% (32.57%). (4) In the fifties, 45.91 % (34.09%). (5) In the sixties, 47.11% (37.19%). (6) In the seventies, 50% (46.15%) 6. The incidence rate of anemia patients with hypertension was highest in the age group 51~60 in male and 31~40 in female.

• Restorative Dentistry and Endodontics
• /
• 제36권6호
• /
• pp.477-482
• /
• 2011

연구목적: 이 연구는 서로 다른 버로 형성한 법랑질 표면에 대한 자가부식 프라이머 접착제의 결합강도를 상호 비교함으로써 법랑질에 우수한 접착 표면을 제공하는 적절한 버를 알아보기 위해 시행하였다. 연구 재료 및 방법: 42개의 발거된 대구치 치관의 법랑질을 이용하였고, 법랑질을 삭제하는 기구의 종류에 따라 6개군, 즉 1군은 Coarse (125 - 150 ${\mu}m$) diamond bur; 2군은 standard (106 - 125 ${\mu}m$) diamond bur; 3군은 fine (53 - 63 ${\mu}m$) diamond bur; 4군은 extrafine (20 - 30 ${\mu}m$) diamond bur; 5군은 plain-cut carbide bur (no. 245); 6군은 cross-cut carbide bur (no. 557)으로 분류하였다. 각 군의 법랑질 표면에 Clearfil SE Bond를 적용한 후 Tygon tube를 이용하여 Clearfil AP-X를 접착하였다. 각 군의 미세전단 결합강도를 측정하였다. 결과: 4군의 결합강도는 모든 군중 가장 높게 나타나 1군, 2군, 3군 및 6군보다 통계학적으로 높게 나타났으며(p < 0.05), 5군과는 통계학적으로 유의한 차이를 나타내지 않았다(p > 0.05). 결론: 버의 종류와 다이아몬드 버의 입자크기는 약한 자가 산부식 프라이머 접착제의 법랑질에 대한 결합강도에 영향을 주었다. Clearfil SE Bond의 법랑질에 대한 우수한 접착을 위해서는 초미세입자 다이아몬드 버나 plain-cut 카바이드 버의 사용이 추천된다.

• 한국지열·수열에너지학회논문집
• /
• 제13권1호
• /
• pp.1-6
• /
• 2017

In this paper, the flow characteristics of water in the water supply pipes of a WBC array were evaluated. We simulated the flow velocities and pressures for a standard pipe, an expansion pipe with a concentric reducer, and an expansion pipe with an eccentric reducer using computational fluid dynamics. In the case of the standard pipe, when the inlet flow velocities were 0.5 m/s and 2.0 m/s, the maximum flow velocities at the center of the WBC array were 0.54 m/s and 2.74 m/s, respectively, which were the greatest values among those of all the pipe models considered. In the case of the expansion pipe, the maximum flow velocities at the center of the WBC array were almost the same under the same conditions regardless of the type of reducer. The pressure losses in the pipe due to the concentric and eccentric reducers were found to be (165.09 ${\times}$ inlet $velocity^{1.6677}$) and (210.98 ${\times}$ inlet $velocity^{1.6478}$), respectively. The coefficient of determination at this time was greater than 0.99 and was the same for both the models. As a simulation result, it was found that in order to reduce the pressure loss when pipe with WBC array is connected with a conventional pipe, diameter of the pipe with WBC array at that section should be enlarged by one step, and then connected to the conventional pipe with a concentric reducer.

• 한국측량학회지
• /
• 제29권6호
• /
• pp.631-639
• /
• 2011

현행 종이어장도는 종이 지도의 노후화는 물론 다양한 좌표계와 좌표 표현 방법을 가지고 있어 활용에 문제가 발생하고 있다. 본 연구에서는 전라남도에서 어업면허권의 공부로 사용 중인 어업권 자료를 대상으로 하여 어장기본도를 전산화한 후 세계측지계로 변환하여 위치정확도를 분석하였다. 연구대상 지역인 전라남도 내 어업권자료의 수면 위치 및 구역도와 어장연락도에 사용되던 다양한 좌표계 표현 방식을 세계측지계 기준으로 통일하고, 지역에 따라 각각 다른 2가지 원점(서부원점, 중부원점)을 적용하여 표기하는 방식도 향후 지역적인 확장성 및 통일성을 고려하여 전라남도 전 연안을 하나의 원점을 사용하였다. 세계측지계로 변환된 어장기본도의 정확도를 DGPS 측량을 통해 확인하였다. 연구결과 RMSE가 최소 4.62m(영광해역)에서 최대 17.47m (장흥해역) 까지 발생하는 것을 알 수 있었고, 전라남도 전체의 평균 오차는 11.97m로 축척 1/25,000 수치지형도의 정확도를 확보한 것을 확인하였다.

• 대한기계학회논문집B
• /
• 제33권6호
• /
• pp.389-395
• /
• 2009

A specially designed flat plate was mounted vertically over the axial line in the wind tunnel of the Pusan National University. Strain balances were mounted in the trailing part of the plate to measure the skin friction drag over removable insertions of $0.55{\times}0.25m^2$ size. A set of the insertions was designed and manufactured: 3 mm thick polished metal surface and three compliant surfaces. The compliant surfaces were manufactured of a silicone rubber Silastic$^{(R)}$ S2 (Dow Corning company). To modify the viscoelastic properties of the rubber, its composition was varied: 90% rubber + 10% catalyst (standard), 92.5% + 7.5% (weak), 85% + 15% (strong). Modulus of elasticity and the loss factor were measured accurately for these materials in the frequency range from 40 Hz to 3 kHz. The aging of the materials (variation of their properties) for the period of one year was documented as well. Along with the drag measurement using the strain balance, velocity and pressure were measured for different coating. The strong compliant coating achieved 5% drag reduction within a velocity range $20{\sim}40$ m/s while standard and weak coatings increased drag reduction.

• 한국구조물진단유지관리공학회 논문집
• /
• 제22권1호
• /
• pp.137-146
• /
• 2018

2016년 경주지진 이후로 국내에서도 본격적으로 건축물의 지진대책 강구가 시급한 시점에서 국내에 널리 보급되어 있는 R/C 건축물의 효율적인 내진성능 평가 및 내진보강을 포함한 내진대책을 위한 기초적인 자료를 얻고자, 2016년 경주지진에서 지진피해를 받은 R/C 저층 학교건축물(M학교)을 대상으로 지진피해도구분판정법을 이용하여 잔존내진성능과 지진피해정도를 평가함과 동시에, 부재수준의 비선형동적해석을 수행하여 지진피해정도와의 상관관계를 검토하였다. 지진피해도구분판정에 의한 손상도-I로 분류된 기둥은 2개, 손상도-II가 1개, 손상도-III으로 분류된 기둥이 3개로 각각 평가되어, 최종적으로 평가한 내진성능잔존율(R)은 88.2%로 피해분류는 소규모 피해로 판정되었으며, 또한 비선형동적해석 결과 1층 X방향의 최대응답을 나타낸 기둥의 휨변위는 0.7 mm, 전단변위는 6 mm로 전단균열은 발생하였지만, 전단파괴는 발생하지 않았다. 경주지진에서 지진피해를 입은 M학교의 지진피해가 1층의 X방향에 집중되어 있다는 사실, 휨균열보다는 전단균열이 발생하였다는 사실을 고려한다면 본 연구에서 수행한 비선형동적해석 결과는 2016년 경주지진에서 지진피해를 받은 M학교의 지진피해상황을 잘 반영하고 있다고 사료되며, 국내 기존 저층 R/C 건축물의 효율적인 내진성능 평가 및 내진보강을 포함한 내진대책을 위한 기초적인 자료로서 활용가능하다고 사료된다.

• 대한한의학방제학회지
• /
• 제11권2호
• /
• pp.213-232
• /
• 2003

Objectives : This study was designed to establish a characteristic discrimination of internal and external morphological standard of original plants and herbal states in Arisaema amurense var. serratum $N_{AKAI}$ and A. amurense $M_{AXIM}.$. Methods : In this studies, the external-internal morphological standards were determined by using stereoscope and butanol series. Results : 1. In the external shape of original plant, Arisaema amurense var. serratum $N_{AKAI}$ has high stem, an oval-elliptic leaflet and a serrate leaf margin. But A. amurense $M_{AXIM}$ has a relatively low stem, an upside oval leaflet and no serrate leaf margin. 2. On the herbs character of original plant, Arisaema amurense var. serratum $N_{AKAI}$ is small in height and diameter, but A. amurense $M_{AXIM}$ is relatively large in height and diameter. 3. On the gathered herbs character of original plant, the section of Arisaema amurense var. serratum $N_{AKAI}$ is brightly white, easily spilt and strong scent. But the section of A. amurense $M_{AXIM}$ is thin yellowish brown, not easily spilt and weak scent. Also the grade of gathered herbs, both can be classified by diameter and external scent. 4. In the current herbs character, Korean and Sichuan Province products are irregullar shape and have no scent, Jilin Province products are regular shape. Also, Guangxi Province products are small size and concave in one side, Hebei Province products are irregular size and shape. 5. In internal shape of original plant, epidermal cell of Arisaema amurense var. serratum is very tight. With the except of micro difference in parenchyma cell of cortex, on the whole there are nearly no differences with A. amurense $M_{AXIM}.$ Also, samely in the internal shape, according to collecting sites, epidermis exhibits a lot layer in curving state and secreting duct is developed and vascular bundle and exists between parenchyma cell of cortex. Conclusion : In the future, additional study is needed to distinguish herb and effect between same genus-degree of relatedness.

• Journal of Mechanical Science and Technology
• /
• 제20권12호
• /
• pp.2052-2060
• /
• 2006

The wear of engine valve and seat insert is one of the most important factors which affect engine performance. Because of higher demands on performance and the increasing use of alternative fuel, engine valve and seat insert are challenged with greater wear problems than in the past. In order to solve the above problems, a simulator was developed to be able to generate and control high temperatures and various speeds during motion. The wear simulator is considered to be a valid simulation of the engine valve and seat insert wear process with various speeds during engine activity. This work focuses on the different degrees of wear at three different singular test speeds (10 Hz, 25 Hz & multi-Hz). For this study, the temperature of the outer surface of the seat insert was controlled at 350$^{\circ}C$, and the test load was 1960 N. The test cycle number was $6.0{\times}10^6$. The mean ($\pm$standard error) wear depth of the valve at 10 Hz and 25 Hz was 45.1 ($\pm$3.7)$\mu$m and 81.7 ($\pm$2.5)$\mu$m, respectively. The mean wear depth of the seat insert at 10 Hz and 25 Hz was 52.7 ($\pm$3.9)$\mu$m and 91.2 ($\pm$2.7)$\mu$m, respectively. In the case of multi-Hz it was 70.7 ($\pm$2.4)$\mu$m and 77.4 ($\pm$3.8)$\mu$m, respectively. It was found that higher speed (25 Hz) cause a greater degree of wear than lower speed (10 Hz) under identical test condition (temperature, valve displacement, cycle number and test load). In the wear mechanisms of valves, adhesive wear, shear strain and abrasive wear could be observed. Also, in the wear mechanisms of seat inserts, adhesive wear, surface fatigue wear and abrasive wear could be observed.

• 수산해양기술연구
• /
• 제22권2호
• /
• pp.22-30
• /
• 1986

It is very important for a navigator on bridge to know the maneuverability of his ship sufficiently at sea. Generally, the data of a turning circle test have long been used to study and evaluate the maneuverability of a ship. But referring only the data of the turning circle test method, he can not evaluate his ship's maneuvering characteristics sufficiently. So nowaday the test method added Z test to turning circle test for more detail references is considered to be desirable. In this paper, the authors performed PAL test and Z test together in order to study the maneuverability of M. S.Pusan 403, training ship of the National Fisheries University of Pusan. According to the results of PAL test, the rudder effect in port rudder angle of the M. S. Pusan 403 was found to be more effective than that in starboard one, because her changing amounts of angular velocity, turning radius and tangent speed in port rudder angles were found to be larger than those of them in starboard rudder one in unsymmetry. The relation between her drift angle(.8) and rudder angle (0) was found to be changing with .8=0.640 in direct proportion. As it appeared that her calculated K'-values were smaller than the standard K'-values of different kinds of ships in accordance with her Z test, her turning ability was found to be lower. The running distance of a turn in her 10$^{\circ}$ Z test was about 8.3 times her own length and was found not to be exceeded the standard maneuvering distance, therefore she was considered to have good maneuverabilities synthetically.