• 한국소음진동공학회논문집
• /
• 제26권5호
• /
• pp.609-615
• /
• 2016

Measuring similarity between two signals is a key element of the location template matching (LTM) method which is one of impact source localization technique. As a measure of similarity, the correlation coefficient is most widely used, and the group delay based method is recently proposed to improve the accuracy of finding the impact source. In practice, the LTM method assumes that the similarity between two signals decreases as the distance between two corresponding impact points increases, where the distance between two neighboring impact points defines the grid spacing. In this paper, it is shown that this assumption is not always true but the correlation coefficients fluctuate forming a main robe and many side robes as the distance between two neighboring impact points increases. On the other hand, the standard deviation of group delay sharply increases with a small increase of the grid spacing. These are demonstrated by using a simple cantilever beam. Based on these findings, an optimal way of implementing the LTM method may be suggested by combining the correlation coefficient and the group delay based approaches.

• 한국통신학회논문지
• /
• 제35권3B호
• /
• pp.380-389
• /
• 2010

현재의 인터넷은 최선형 서비스를 지향하고 있기 때문에 비트량이 많은 고품질 미디어의 스트리밍을 실현하기 위해서는 수시로 변화하는 네트워크 상황을 극복하기 위한 기법이 요구된다. 본 논문에서는 네트워크가 미디어의 요구 대역폭을 허용하는지를 신속히 판단하는 기법과 이를 통해 QoS를 제어하는 기법을 설계 및 구현한다. 요구대역 허용여부 판단은 상대적인 한 방향 전송지연(ROWD: Relative One-Way Delay)의 추세를 이용하며, QoS 제어 SVC(Scalable Video Coding)중 실시간성 적용이 용이한 시간적 부호화 부분만을 도입한다. 스트리밍 서버는 미디어를 몇 개의 비트율로 실시간 레벨화한 후 최상위 레벨부터 전송을 시작하고 클라이언트로부터 ROWD에 대한 추세를 주기적으로 보고받는다. '증가추세'를 보고 받았을 경우에만 현재의 레벨이 가용대역폭을 초과하고 있다고 판단하고 하향조정을 실시한다. 상향조정을 위해서는 목표 레벨과 현재 레벨간 차분의 탐지 패킷을 이용하는데 이때, 탐지 패킷의 ROWD에 대하여 '증가없음'을 보고 받았을 경우에만 상향조정이 이루어진다. FTTH 환경에서의 실험은 제안 시스템이 가용 대역폭의 변화에 빠르게 적응하는 과정을 보여주며 서비스 품질 또한 향상시켜줌을 보여준다.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2007년도 심포지엄 논문집 정보 및 제어부문
• /
• pp.445-447
• /
• 2007

This paper is seeing as one big cause that reduce Life Time of sensor node become soft if BackOff Time is prolonged in CDMA/CA of competition way that consist at data transmission of each sensor nodes base sensor network environment. So solution method uses GTS, wish to reduce competition Node's, and minimise data transmission delay.

• 한국지능시스템학회:학술대회논문집
• /
• 한국퍼지및지능시스템학회 1993년도 Fifth International Fuzzy Systems Association World Congress 93
• /
• pp.1098-1101
• /
• 1993

The purpose of this work is to build a fuzzy model of a batch culture for a process control. The process is highly nonlinear system with large delay. This paper presents two methods of modeling the process behavior. One is a method of recognizing them by fuzzy rules that are contracted by the pattern analysis in consideration of skilled operators' way. The other is a method of predicting them by approximate linear models and fuzzy rules by statistic analysis.

• International Journal of Control, Automation, and Systems
• /
• 제2권1호
• /
• pp.76-82
• /
• 2004

A robust fuzzy controller is designed to stabilize a class of solvable nonlinear descriptor systems with time-varying delay. First, a new modeling and control method for nonlinear descriptor systems is presented with a fuzzy descriptor model. A sufficient condition for the existence of the fuzzy controller is given in terms of a series of LMIs. Then, a less conservative fuzzy controller design approach is obtained based on the fuzzy rules and weights. This method includes the interactions of the different subsystems into one matrix. The effectiveness of the presented approach and the design procedure of the fuzzy controller are illustrated by way of an example.

• 한국통신학회논문지
• /
• 제35권2A호
• /
• pp.196-201
• /
• 2010

Measurement of Quality of Service (QoS) parameters and its statistical analysis becomes a key issue for Mobile WiMAX service providers to manage the converged network efficiently and to support end-to-end QoS. In this paper, we investigate the population distribution of end-to-end one-way delay which is the most important QoS parameter in Mobile WiMAX networks. The samples are analyzed with Chi-Square Goodness-of-Fit test, Kolmogorov-Smirnov (K-S), and Anderson-Darling (A-D) test to verify the distribution of parent population. The relation with confidence level and the minimum number of sample size is also performed for logistic distribution. The statistical analysis is a promising approach for measuring the performance Mobile WiMAX networks.

• 감성과학
• /
• 제21권2호
• /
• pp.137-144
• /
• 2018

본 연구에서는 가변 통기성 스마트 의류의 제작을 위해 필요한 형상기억합금 액추에이터의 작동 조건을 파악하였다. 의복의 개방, 폐쇄와 같은 양방향 작동 시 형태 변형 시에만 전력을 소모하는 저전력 소모 액추에이터 개발을 위해 복수 채널의 일방향 형상기억합금을 이용하여 스위치로 작동되는 액추에이터를 설계하였으며 가장 효율적으로 작동할 수 있는 와이어의 직경과 전압인가 단위시간을 도출하였다. 선행연구 결과 도출된 양방향 작동이 가능한 일방향 형상기억합금의 직경 범위 내에서 Arduino 스위치를 제작하여 3.7V 전압인가 시 변화량을 분석한 결과 $0.4{\Phi}$의 액추에이터가 가장 적합한 것으로 나타났다. $0.4{\Phi}$ 형상기억합금와이어를 사용한 양방향작동 액추에이터의 개방, 폐쇄에 필요한 최적전압인가 시간을 도출하기 위해 액추에이터의 최대개방, 최소폐쇄 도달 전압인가 시간으로부터 50ms씩 감소, 증가 시키며 냉각 후 액추에이터의 내경을 비교하는 방식으로 측정한 결과 개방 동작에 필요한 최적 전압인가 단위시간은 4,100ms로 나타났다. 각 채널간의 발열에 의한 간섭을 최소화하기 위한 양방향간 작동 시 필요 딜레이 분석을 위해 상온에서 형상기억합금에 최적 전압입가 시간인 4.1초 동안 전원을 공급하고 가열 후 냉각까지의 과정을 열화상카메라로 촬영하여 형상기억합금 와이의 온도가 냉각시의 상변태온 이하로 하강하는 시점을 파악한 결과, 액추에이터의 양방향간 작동 딜레이는 1.8초 이상이 확보되어야 함을 파악할 수 있었다.

• 한국도로학회논문집
• /
• 제15권5호
• /
• pp.217-226
• /
• 2013

PURPOSES : Under the capacity conditions with balanced approach flows, roundabouts give less delay than existing signalized intersections; however, flows over 450 vehicles/hour/lane with unbalanced approach flow conditions, roundabouts efficiency drops due to the short time difference between the critical gap and the follow-up headway. The purpose of this study is developing a roundabout Signal Metering operation method by considering approach lanes degree of saturation. METHODS : A four-way-approach with one-lane roundabout is selected to compare the Signal Metering performance for the case of 16 different unbalanced flow conditions. Based on these traffic conditions, the performance is evaluated for 64 different cases of Signal Metering combinations by using SIDRA software. A degree of saturation(V/C ratio) sum for two adjoined approaches is used for the performance index of choosing Metered Approach and Controlling Approach. RESULTS : When the V/C ratio sum is 0.29~0.81 and Metered Approach flow is less than Controlling Approach flow, the average delay saving per vehicle is about 7 seconds; however, after this rage the delay saving decreases gradually until the V/C ratio sum reaches around 1.0. The range of V/C ratio sum 0.93~1.09 provides average delay saving per vehicle about 3 seconds. In case of V/C ratio sum is grater than 1.0 and the flows of Metered Approach is grater than Controlling Approach, the average delay per vehicle increases 3~11 times respectively. CONCLUSIONS : As expected, the Signal Metering provides substantial improvements in delay saving for the case of V/C ratio sum is 0.3~1.0 under the traffic flow conditions of Metered Approach is less than Controlling Approach.

• 한국통신학회논문지
• /
• 제23권9A호
• /
• pp.2184-2196
• /
• 1998

Admission control is one of the most important congestion control mechanism to be executed at the call set up phase by regulating traffic into a network in a preventive way. An efficient QOS evaluation or bandwidth estimation method is required for call admission to be decided in real time. In this paper, we spropose a computtionally simple approximation method of estimating cell loss probability and mean cell delay for admission control of both delay sensitive and loss sensitive calls. Mixed input queueing system, where a new call combines with the existing traffic, is used as a queueing model for QOS estimation. Also traffic parameters are suggested to characterize both a new call and existing traffic. Aggregate traffic is approximated by a renewal process with these traffic parameters and then mean delay and cell loss probability are detemined using appropriate approximation formulas. The accuracy of this approximation approach is examined by comparing their results with exact analysis or simulation results of vrious mixed unput queueing systems. Based on this QOS estimation method, call admission control scheme which is traffic independent and computable in yeal time are proposed.

• 대한전자공학회논문지TC
• /
• 제46권2호
• /
• pp.147-151
• /
• 2009

본 논문에서는 주파수 측정기의 핵심 소자이며 위상 비교 방향 탐지기의 핵심 소자인 위상 변별기를 설계하였다. Microwave Frequency대역 분류를 기준으로 하여 C-Band의 주파수 신호를 처리하는 광대역 Correlator를 설계하였다. 위상 번별기를 구성하는 광대역 2단 2way Power Divider를 설계하였으며, $180^{\circ}$ Metamaterial Hybrid Rat-Race Coupler와 $90^{\circ}$ Hybrid Coupler를 설계하여, 일반적인 위상변별기와 비교하여, Compact하며, 광대역인 특성을 얻을 수 있었다. 위상 변별기의 구성은 광대역 소자를 사용하였으며 그 외 Phase를 맞추기 위한 Delay Line을 구성하였다.