• Korean Journal of Veterinary Research
• /
• v.31 no.4
• /
• pp.523-527
• /
• 1991

The effects of ethylene glycol, DMSO and glycerol as cryoprotectants and the effect of concentrations(0, 0.25, 0.5 and 1.0M) of sucrose in the diluent on the viability of the aggregated morulae frozen rapidly in liquid nitrogen$(LN_2)$ vapour were examined. The morulae were produced by aggregation of ICR and CBA mice embryos at 8-cell stage. Before freezing the embryos were equilibrated in 1.5M cryoprotectants+0.25M sucrose in oae-step or in 3.0M cryoprotectants+0.25M sucrose in two-steps. The embryos were pipetted into the freezing medium fraction of 0.25ml plastic straws. The straws were frozeu by directly transfer into $LN_2$ vapour(about lcm above $LN_2$) for 2 minutes, and then plunged into $LN_2$. After thawing the cryoprotectants were diluted with 0, 0.25, 0.5 or 1.0M sucrose solution. The post-thawed in vitro viability of the aggregated embryos was significantly dependent on the type and concentration of cryoprotectants in the freezing medium and also on the concentration of sucrose in the diluent. When the aggregated embryos were equilibrated in 1.5M cryoprotectants +0.25M sucrose in one-step and diluted with 0.5M sucrose after thawing, the survival rate of the embryo5 was significantly(p<0.05) higher in DMSO(62.5%) or ethylene glycol(52.2%) than in glycerol(33.3 %). In the case that the concentration of the cryoprotectants was raised to 3.0M in two-steps, thc higher survival rate of the embryos was obtained in ethylene glycol or glycerol than in DMSO followed by diluting them with 0.5 or 1.0M sucrose after thawing(p<0.01).

• Journal of Korea Water Resources Association
• /
• v.44 no.3
• /
• pp.209-220
• /
• 2011

Input uncertainty is one of the major sources of uncertainty in hydrologic modeling. In this paper, first, three alternate rainfall inputs generated by different interpolation schemes were used to see the impact on a distributed watershed model. Later, the residuals of precipitation interpolations were tested as a source of ensemble streamflow generation in two river basins in the U.S. Using the Monte Carlo parameter search, the relationship between input and parameter uncertainty was also categorized to see sensitivity of the parameters to input differences. This analysis is useful not only to find the parameters that need more attention but also to transfer parameters calibrated for station measurement to the simulation using different inputs such as downscaled data from weather generator outputs. Input ensembles that preserves local statistical characteristics are used to generate streamflow ensembles hindcast, and showed that the ensemble sets are capturing the observed steamflow properly. This procedure is especially important to consider input uncertainties in the simulation of streamflow forecast.

• Journal of the Korean Society for Aeronautical & Space Sciences
• /
• v.31 no.7
• /
• pp.118-126
• /
• 2003

In this study, a battery charge and discharge regulator of modular type is designed as paralleled bi-directional converter that is possible to provide the power without failure not only in the steady state but also in the transient period by the step load variation or the unexpected faults among the converter modules. Each converter module is designed to get stability, performance, reliability, and maintainability and the average current mode method used for controller has the advantages such as noise immunity, fast response, and the real average current signal acquisition. The equivalent model and small signal model for the paralleled battery chargerIdischarger are presented, and also the transfer functions are analyzed for the CCM(Continuous Charge Mode), CDM(Continuous Discharge Mode) and DDM(Discontinuous Discharge Mode). The experiments of the paralleled bi-directional converter are carried out in the step load variation, and in faults of one converter module respectively. And the performance of paralleled bi-directional converter is verified via the experimental results.

• Applied Chemistry for Engineering
• /
• v.8 no.4
• /
• pp.645-652
• /
• 1997

Electrochemical characteristics and kinetic parameters of copper ion reduction were investigated with a platinum rotating disk electrode (RDE) in a diffusion controlled region. Reduction of Cu(II) in sulfate had one-step two-xelectron process, while the reduction of Cu(II) in chloride solution was involved two one-electron processes. The transfer coefficient of Cu(II) in sulfate solution was lowest, and the transfer coefficient of Cu(I) in halide solutions had the value of nearly one. In chloride solutions, electrodeposition rate of Cu(II) was about one hundred times faster than Cu(I). Diffusion coefficient increased in the order of Cu(II) in chloride solution, Cu(I) in the iodide, bromide, chloride solution, Cu(II) in sulfate solution. The calculated ionic radii and activation energy for diffusion decreased in the same order as above. Morphological study on the copper electrodeposition indicated that the electrode surface became rougher as both concentration and reduction potential increases, and the roughness of the surface was analyzed with UV/VIS spectrophotometer.

• Transactions of the Korean Society of Mechanical Engineers B
• /
• v.25 no.11
• /
• pp.1594-1605
• /
• 2001

In this study, a numerical simulation was developed which was capable of predicting the characteristics of NO formation in pilot scale combustor adopting the air-staged burner flame. The numerical calculation was constructed by means of establishing the mathematical models fur turbulence, turbulent combustion, radiation and turbulent nitric oxide chemistry. Turbulence was solved with standard k-$\xi$ model and the turbulent combustion model was incorporated using a two step reaction scheme together with an eddy dissipation model. The radiative transfer equation was calculated by means of the discrete ordinates method with the weighted sum of gray gases model for CO$_2$and H$_2$O. In the NO chemistry model, the chemical reaction rates for thermal and prompt NO were statistically averaged using the $\beta$ probability density function. The results were validated by comparison with measurements. For the experiment, a 0.2 MW pilot multi-air staged burner has been designed and fabricated. Only when the radiation was taken into account, the predicted gas temperature was in good agreement with the experimental one, which meant that the inclusion of radiation was indispensable for modeling multi-air staged gas flame. This was also true of the prediction of the NO formation, since it heavily depended on temperature. Subsequently, it was found that the multi-air staged combustion technique might be used as a practical tool in reducing the NO formation by controlling the peak flame temperature.

• Journal of the Korean Society for Precision Engineering
• /
• v.25 no.12
• /
• pp.125-131
• /
• 2008

In the past, precision optical glass lenses were produced through multiple processes such as grinding and polishing, but mass production of aspheric lenses requiring high accuracy and having complex profile was rather difficult. In such a background, the high-precision optical GMP processes were developed with an eye to mass production of precision optical glass parts by molding press. Generally because the forming stage in a GMP process is operated at high temperature above $570^{\circ}C$, thermal stresses and deformations are generated in the aspheric glass lens mold that is used in GMP process. Thermal stresses and deformations have negative influences on the quality of a glass lens and mold, especially the height of the deformed glass lens will be different from the height of designed glass lens. To prevent the problems of a glass lens mold and the glass lens, it is very important that the thermal stresses and deformations of a glass lens mold at high forming temperature are considered at the glass molds design step. In this study as a fundamental study to develop the molds used in an aspheric glass lens fabrication, a heat transfer and a thermal stress analysis were carried out for the case of one cavity glass lens mold used in progressive GMP process. Finally using analysis results, it was predicted the height of thermally deformed guide ring and calculated the height of the guide ring to be modified, $64.5{\mu}m$. This result was referred to design the glass lens molds for GMP process in production field.

• Journal of Embryo Transfer
• /
• v.4 no.1
• /
• pp.1-13
• /
• 1989

This paper reviews the most important steps that have generated consistent progress in principles and developmental progress of embryo cryopreservation, and also study on freezing procedure and its application by conventional method and current improved method for freezing procedure and its appilcation of embryo cryopreservation in farm animals. Four were of particular interest: 1.The transport of water across the ccli membrane (zona pellucida) during freezing and thawing accordinglyplays a role in determing whether the celi survives. This movement of water is controlied mainly by extracellular phase changes and by the nature and concentration of any cryoprotective agent present. Therates of cooling, freezing and warming, and the intervals over which they are applied are further decisi've factors in determining whether a cryopreservation procedure allows survival after thawing. 2.The first successful deep freezing experiments with sheep morula and blastocysts during the seventies were based on the early procedures used for mouse embryos.Current research during the eighties is developed with the aim of simplifying and improving current procedures such as one-step dilution and rapid or ultra-rapid cooling by using the model of laboratory animals. 3.The conventional method for the embryo cryopreservation is described. An alternative to this method which may result in high survival and also in reducing of the freezing and thawing time is done by combing a permeable cryoprotectant such as glycerol, DMSO or propanediol and a non-permeable compound such as sucrose, trehalose, raffinose or lactose. 4.Finally a different approach to the preservation of embryos, named vitrification, is introduced. This procedure depends upon the ability of concentrated solutions of cryoprotective agents such as glycerol and propanediol to supercool to very low temperature (-196$^{\circ}C$) during rapid cooling before solidifying without formation of ice. However, more complete data are necessary for successful vitrification of blastocysts.

• Journal of Embryo Transfer
• /
• v.9 no.2
• /
• pp.173-180
• /
• 1994

The present experirnents on cryopreservation were carried out to investigate effect of solution toxicity, equilibration time and cell stages on the post-thaw survival of mouse morulae and blastocyst embryos cryopreserved by vitrification in EFS solution. The mouse embryos were exposed to the EFS solution in one step at room temperature, kept in the EFS solution during different period for toxicity test, vitrified in liquid nitrogen and thawed rapidly. After the mouse morulae embryos were exposed to EFS solution for 2 and 5 ruin. at room temperature and then they were washed in 0.5 M sucrose solution and basal mediurn(D-PBS + 10% FCS), they were cultured to examined cryoprotectant toxicity induced injury during exposure, most of embryos developed to expanded blastocysts(100 and 90.0%). However, when the exposure time was extended to 10 and 20 min, these development rates dropped dramatically in 10 ruin. (75.0%) and 20 ruin. (4.5%), respectively. When the compacted morulae were vitrified in EFS solution after equilibration for 2 and 5 min, the embryos have developed to normal blastocyst following thawing, washing and culture processes was 89.3 and 89.6%. However, when the exposure time was expanded to 10 ruin, this survival rate dropped to 68.8%. When the blastocyst were vitrified in EFS solution after equilibration for 2, 5 and 10 minutes, the survival rate of embryos which developed to normal blastocyst following thawing and culture processing were 58.5, 46.7 and 22.4%, respectively. The optimal time of equilibration of mouse morula and blastocysts in EFS solution seemed o be 2 and 5 ruin.

• Journal of Embryo Transfer
• /
• v.25 no.4
• /
• pp.259-262
• /
• 2010

Optimization of the preimplantation mammalian embryo culture condition was widely focused on refining medium composition under the name of chemically defined media. However, recent research revealed that the alteration of physical environment can be a crucial factor to a successful embryo development. In this study, under the same embryo density, a novel culture device named oil-free micro tube culture (MTC) system was evaluated using porcine parthenogenetic embryos. The activated oocytes were placed into the 0.2 ml thin-wall flat cap PCR tube and cultured to the blastocyst stage. As a preliminary step, embryo density and culture medium volume were optimized under a standard drop culture system. The optimal embryo density range for in vitro culture was 0.5 embryos per ${\mu}l$ in $20\;{\mu}l$ drop (20.5%) and 1.0 embryos per ${\mu}l$ in $10\;{\mu}l$ drop (20.6%). Based on these results, we compared drop culture system and 'MTC' system in terms of the developmental rate to the blastocyst stage. In $20\;{\mu}l$ medium volume, the 'MTC' system showed similar blastocyst formation rate when compared with drop culture system (20.2% versus 20.5%, respectively) while the 'MTC' system showed lower blastocyst formation rate than drop culture system in $10\;{\mu}l$ one (12.7% versus 20.0%, respectively). Therefore the $20\;{\mu}l$ MTC system may be an alternative incubation system for short-distance embryo transport without carrying the $CO_2$ incubator and this provides novel embryo culture device to clinical veterinary embryologists.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.19 no.4
• /
• pp.691-700
• /
• 1994

A power line in not so good in characteristics for communication, because it is a media to transfer the commercial electrical power, and its load noise and high frequency noise are so much. Thus, a simple method to transfer a remote control signal on the power line is studied. The already-existing method is that two signals with upper part eliminated is transmitted every N step. But the method is investigated which the transmitter sends a period signal eliminated in arbitrary phase. Thus the transmission power loss due to elimination of signal can be reduced to the minimum. To implement it, a timer calculating the time from zero-crossing point to the phase is required. The micro-controller, 87C51, precisely calculates the phase using one of two built-in timers. As a result, a remote control signal tramsmitter and receiver using a partially eliminated signal, which is better than the conventional technique using half-eliminated signal in a efficiency of power transmission, is realized, and its characteristics are analyzed.