• Electrical & Electronic Materials
• /
• v.9 no.8
• /
• pp.789-798
• /
• 1996

The double nitride layer Metal Nitride Oxide Semiconductor(MNOS) structures were fabricated by variating both gas ratio and nitride thickness, and by duplicating nitride deposited and one nitride layer MNOS structure to improve nonvolatile memory characteristics of MNOS structures by Low Pressure Chemical Vapor Deposition(LPCVD) method. The nonvolatile memory characteristics of write-in, erase, memory retention and degradation of Bias Temperature Stress(BTS) were investigated by the homemade automatic .DELTA. $V_{FB}$ measuring system. In the trap density double nitride layer structures were higher by 0.85*10$^{16}$ $m^{-2}$ than one nitride layer structure, and the AVFB with oxide field was linearly increased. However, one nitride layer structure was linearly increased and saturated above 9.07*10$^{8}$ V/m in oxide field. In the erase behavior, the hole injection from silicon instead of the trapped electron emission was observed, and also it was highly dependent upon the pulse amplitude and the pulse width. In the memory retentivity, double nitrite layer structures were superior to one nitride layer structure, and the decay rate of the trapped electron with increasing temperature was low. At increasing the number on BTS, the variance of AVFB of the double nitride layer structures was smaller than that of one nitride layer structure, and the trapped electron retention rate was high. In this paper, the double nitride layer structures were turned out to be useful in improving the nonvolatile memory characteristics.

• Atmosphere
• /
• v.21 no.2
• /
• pp.151-162
• /
• 2011

One-layer solar radiation(GWNU; Gangneung-Wonju National University) model is developed in order to resolve the lack of vertical observations and fast calculation with high resolution. GWNU model is based on IQBAL(Iqbal, 1983) and NREL(National Renewable Energy Laboratory) methods and corrected by precise multi-layer LBL(Line-by-line) model. Input data were used 42 atmospheric profiles from Garand et al.(2001) for calculation of global radiation by the Multi-layer and one-layer solar radiation models. GWNU model has error of about -0.10% compared with LBL model while IQBAL and NREL models have errors of about -3.92 and -2.57%, respectively. Global solar radiation was calculated by corrected GWNU solar model with satellites(MODIS, OMI and MTSAT-1R), RDPS model prediction data in Korea peninsula in 2009, and the results were compared to surface solar radiation observed by 22 KMA solar sites. All models have correlation($R^2$) of 0.91 with the observed hourly solar radiation, and root mean square errors of IQBAL, NREL and GWNU models are 69.16, 69.74 and $67.53W/m^2$, respectively.

• Journal of Environmental Science International
• /
• v.6 no.5
• /
• pp.425-435
• /
• 1997

One-dimensional thermodynamic mixed layer model to stimulate variations of meteorological variables wish the planetary boundary layer has been developed In this study. This model consists of 2 prognostic equations, which can predict the variations of potential temperature and mixing ratio and several diagnostic equations. Physics within the surface and mixed layers has been considered seperately in the model. For the variations of the model, Its result has been analysed and compared with observated data over Ole Dukyang Bay for one day, July 23, 1992. The simulated height of mixed layer is comparable to the observation and the variations of temperature and mixing ratio in the mixed layer are also reasonably simulated. Those Imply that the model responds appropriately with given boundary conditions In sprite of Its simplilfied assumptions applied to the model and insufficient boundary and Initial conditions.

• Journal of the Korean Operations Research and Management Science Society
• /
• v.31 no.3
• /
• pp.41-51
• /
• 2006

Clustering is to group similar objects into clusters. Until now there are a lot of approaches using Self-Organizing feature Maps (SOFMS) But they have problems with a small output-layer nodes and initial weight. For example, one of them is a one-dimension map of c output-layer nodes, if they want to make c clusters. This approach has problems to classify elaboratively. This Paper suggests one-dimensional output-layer nodes in SOFMs. The number of output-layer nodes is more than those of clusters intended to find and the order of output-layer nodes is ascending in the sum of the output-layer node's weight. We un find input data in SOFMs output node and classify input data in output nodes using Euclidean distance. The proposed algorithm was tested on well-known IRIS data and TSPLIB. The results of this computational study demonstrate the superiority of the proposed algorithm.

• Journal of the Korean Applied Science and Technology
• /
• v.22 no.3
• /
• pp.234-240
• /
• 2005

In this study, we have prepared three kinds of enteric tablet coating formulations for prevention the crack incidence and enhanced process improvement of enteric tablet using aqueous system. we determined the mechanical strength of three formulatons on the enteric film-coating process. The compared experiment of one-layer and two-layer (A), (B) coating treated having placebo tablets without breakline and logo. In result, the breaking force time of two-layer (B) film strength was found to increase 0.8min than two-layer (A). We confirmed the half reduction of working hour and the simplification in the one-layer coating process, and the coating troubles was solved as setting up a dehumidifier in inlet of coater. In result, we recovered that optimum running capacity(g/kg) of dehumidifier is 10g/kg and below.

• International Journal of CAD/CAM
• /
• v.12 no.1
• /
• pp.29-37
• /
• 2012

A new algorithm has been developed to construct surface from the contours having branches and the final smooth surface is obtained by the reversible Catmull-Clark subdivision. In branching, a particular layer has more than one contour that correspond with at least one contour at the adjacent layer. In the next step, three-dimensional composite curve is constructed from contours of a layer having correspondence with at least one contour at the adjacent layer by inserting points between them and joining the contours. The points are inserted in such a way that the geometric center of the contours should merge at the center of the contours at the adjacent layer. This process is repeated for all layers having branching problems. Polyhedra are constructed in the next step with the help of composite curves and the contours at adjacent layer. The required smooth surface is obtained in the proposed work by providing the level of smoothness.

• Journal of the Korean Graphic Arts Communication Society
• /
• v.28 no.2
• /
• pp.57-67
• /
• 2010

The double layer screen plate tensioned with two sheets screen mesh is more thicker than that of one screen sheet. The double layer screen plate piled up with two sheets screen 200# or overlapped with a sheet screen 110# and a sheet screen 305# is more thicker than single layer screen plate with one sheet screen 420#. As the screen plate composed of two sheets screen has more accumulated ink capacity than one sheet of screen, printing printed with it has a good plasticity. And the single layer screen plate that accumulate a small quantity of ink has an excellent representation than the double layer screen plate but lower plasticity.

• International Journal of CAD/CAM
• /
• v.8 no.1
• /
• pp.21-28
• /
• 2009

In the present work, an attempt has been made to construct branching surface from 2-D contours, which are given at different layers and may have branches. If a layer having more than one contour and corresponds to contour at adjacent layers, then it is termed as branching problem and approximated by adding additional points in between the layers. Firstly, the branching problem is converted to single contour case in which there is no branching at any layer and the final branching surface is obtained by skinning. Contours are constructed from the given input points at different layers by energy-based B-Spline approximation. 3-D curves are constructed after adding additional points into the contour points for all the layers having branching problem by using energy-based B-Spline formulation. Final 3-D surface is obtained by skinning 3-D curves and 2-D contours. There are three types of branching problems: (a) One-to-one, (b) One-to-many and (c) Many-to-many. Oneto-one problem has been done by plethora of researchers based on minimizations of twist and curvature and different tiling techniques. One-to-many problem is the one in which at least one plane must have more than one contour and have correspondence with the contour at adjacent layers. Many-to-many problem is stated as m contours at i-th layer and n contours at (i+1)th layer. This problem can be solved by combining one-to-many branching methodology. Branching problem is very important in CAD, medical imaging and geographical information system(GIS).

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.13 no.10
• /
• pp.2227-2234
• /
• 2009

DVB-SSP is a new broadcasting system for hybrid satellite communications, which supports mobile handheld systems and fixed terrestrial systems. An upper layer, including erasure Reed-Solomon error correction combined with cyclic redundancy check. However, a critical factor must be considered in upper layer decoding. If there is only one bit error in an IP packet, the entire IP packet is considered as unreliable bytes, even if it contains correct bytes. If, for example, there is one real byte error, in an IP packet of 512 bytes, 511 correct bytes are erased from the frame. Therefore, this paper proposed upper layer decoding methods; LLR-based decoding. By means of simulation we show that the performance of the proposed decoding algorithm is superior to that of the conventional one.

• Culinary science and hospitality research
• /
• v.7 no.2
• /
• pp.123-132
• /
• 2001

The contents of the pastry margarine were 30, 50, 70, 90 and 110% based on baker's %, and the layers of the dough were 18, 27, 36, 48 and 64 in danish pastry product In order to analyse on the effect of the theoretical one layer thickness of the pastry margarine, the volume, quality and sensory evaluation of the products have been carried out. The results as follows ; 1) Best volume was showed that the thickness of the dough was 5mm and the thickness of one layer was 0.039mm. 2) When the content of the pastry margarine was 30% and the thickness of one layer was 0.014mm(48 layers), when 50%, 0.039mm(27 layers), when 70%, 0.038(36 layers), when 90%, 0.034(48 layers) and when 110%, 0.039(48 layers), best volume was showed. 3) In the case when the content of pastry margarine was 70% and the thickness of one layer was 0.038mm(36 layers), as well as 110%, 0.039mm(48 layers), the taste were showed 5%, better than when 30%, 0.014(27 layers) in the sensory evaluation. Flavor and mouth feel was the same results. 4) For the best quality products, the content of the pastry margarine and the layers of the dough were very important.