• The Sea:JOURNAL OF THE KOREAN SOCIETY OF OCEANOGRAPHY
• /
• v.9 no.4
• /
• pp.204-211
• /
• 2004

Autonomous profiling CTD floats are a useful tool for observing the oceans. We, however, cannot perform post-deployment calibration of the CTD's attached to the floats, and the assessment of the accuracy and stability of the profile data from the floats is one of the important issues in the delayed mode quality control of the profiles. Variations in salinity in the intermediate level of East Sea is comparable to the accuracy of salinity data required by the international Argo Program, which is 0.01. Therefore, we can assess the credibility of salinity data from the floats deployed in the East Sea using three independent methods while considering the East Sea as a salinity calibration bath. The methods utilized here are 1) comparison of high quality CTD data and float data obtained at similar locations at similar time, 2) comparison of float data obtained at similar locations at similar time, and 3) investigation of long term stability and accuracy of salinity data from parking depths. All three methods show that without any calibration, the salinity data satisfy the accuracy criterion by the Argo Program. While assuming that the intermediate level temperature in the East Sea is as homogeneous as the salinity, we have applied the three methods to temperature data. We found that the accuracy of temperature reading is 0.01$^{\circ}C$, which is about twice larger than the requirement by the Argo Program, 0.005$^{\circ}C$. This does not mean that the temperature readings are inaccurate, because the intermediate level temperature does vary spacially and temporally more than the accuracy interval required by the Argo Program. If we take into account the variation in the intermediate level temperature, the accuracy of temperature data from the floats is not significantly different from that proposed by the Argo Program. Therefore, one could use both temperature and salinity profiles from the floats assessed in this study without calibration.

• The Journal of Korean Academy of Prosthodontics
• /
• v.25 no.1
• /
• pp.137-154
• /
• 1987

The purpose of this investigation was to determine the surface characteristics and the fittness of the resilienct denture lines. Firstly, 50 samples ($2.0{\times}4.0{\times}0.3cm$) of 4 resilient lining materials (Molloplast B, Coe Super Soft, Mollosil, Coe Soft) and one conventional acrylic resin (K-33) were processed according to manufacture's direction and examined the surface characteristics by use of surface profilometer and scanning electron microscopy. Secondly, 50 identical maxillary casts were made and 50 denture bases were pro cessed of 4 resilient liners and one conventional acrylic resin and they were stored in the room temperature water bath of 1 day, 1 week, 2 weeks, 3 weeks, 4 weeks and 6 weeks after processing. The original casts were cut away 1 cm from the posterior border, the dentures were seated, and the existing space was measured at seven regions according to the storage time by use of the modified thickness guage. The results were as follows. 1. Surface roughness (Rz) were $4.00{\pm}1.60{\mu}m$ in Mollosil, $4.47{\pm}2.21{\mu}m$ in Molloplast B, $7.46{\pm}1.70{\mu}m$ in Coe Super Soft, $12.70{\pm}2.39{\mu}m$ in Coe Soft and $13.03{\pm}2.74{\mu}m$ in K-33. 2. The generation of porosity was far more active in cold-cured resilient liners (Coe Soft and Mollosil) than in heat cured resilient liners (Molloplast B, and Coe Super Soft) and conventional heat cured resin (K-33). 3. Denture bases showed the greatest discrepancy at the central portion of the posterior palatal border and the intimate contact in the buccal flange regardless of denture base materials. 4. When the denture bases were stored in the water for 1 day and 6 weeks after processing, the sum of average discrepancies in the seven regions of the denture base was the greatest in K-33 followed by Molloplast B, Mollosil, Coe Soft and Coe Super Soft but followed by Coe Soft, Molloplast B, Mollosil, Coe Super Soft in that order respectively. 5. There was not a significant difference (p>0.05) in Coe Super Soft, K-33 but there was a significant difference (P<0.01) in Molloplast B, Mollosil, Coe Soft at the amount of dimensional changes according to the storage time.

• Journal of Korean Academy of Nursing
• /
• v.29 no.4
• /
• pp.743-754
• /
• 1999

The purpose of this descriptive study was to identify the homecare needs of patients with cancer and to provide a basis of interventions. One hundred and two patients at one general hospital in Gyeongnam responded to a questionnaire developed on the basis of care needs perceived by nurses caring for hospitalized patients with cancer. The questionnaire was a Likert type 5 point scale with 56 items on five need categories ; 1) informational 2) physical care : 3) emotional care 4) socioeconomic care and 5) special care needs. Internal consistency of this questionnaire was Cronbach's $\alpha$＝.9101 for total items. The data was collected from March 1st to May 31th, 1998, by two graduate nurses. In the data analysis, mean & standard deviation were calculated to identify the degree of care need of each item, and the t-test & ANOVA were done to determine the effects of patients' demographic background on their care needs. The findings are summarized as follows ; 1) The mean score of total of need items was 3.048. Of the four need categories the highest score was informational at 3.4, followed by emotional care, 3.063, physical care, 2.623, and socioeconomic care, 2.599. 2) In the informational need category there were four subcategories with 19 items. Medication and pain control had the highest score, 3.755 ; second was diet and exercise, 3.613 ; third was disease and treatment process, 3.337 ; and last was personal hygiene and infection prevention at 2.687. 3) In the physical care need category there was nine items, IV infusion for nutrition and management of treatment complication was above 3.2 points and the remaining items were in the 2.847-2.070 score ranges. 4) In the emotional care need category there were seven items. The highest need was in support for relationships with health personnel, 3.673. The need for support of religions beliefs and support for having a religion were low at about 2 points. 5) In the socioeconomic care need category there were six items. Support for medical insurance expansion and financial support were above 3 points. Legal support and support for caring of children were low in the care needs. 6) In the special care need category the there were 15 items. Informational need about immunization and informational need about effects of disease on growth and development were high, above 4.1 points. Need for decubitus care and prevention, sitz bath and incontinence care were low, below 2 points. 7) There were significant differences in degree of care need according to admission rate, education level, marital status, religion and caregiver's religion. In conclusion, homecare needs perceived by hospitalized patient's with cancer was moderate, but informational need was higher than direct care need, leading to the conclusion that the provision of sufficient information to patients with cancer at discharge is needed. Nursing interventions should be developed considering the patient's background.

• The Korean Journal of Physiology
• /
• v.15 no.2
• /
• pp.91-96
• /
• 1981

The wormwood is one of the plants which occur widely throughout the world. Though the precise data on the entire chemical composition of mugwort leaves are not available, the major principles which have been found so far include inulin, alkaloid, thujon, sesquiterpene and several vitamins. Santonin, a parasiticide, is one of the glucosides extracted from the limited species of wormwood. It has long been known in herb medicine that the plants of this family has not only strong hemostatic, analgesic and parasiticidal actions but also therapeutic effects for diarrhea, stomachache and asthma. In recent pharmaceutical botany the wormwood is introduced to have antipyretic and astringent actions also. The mugwort(Artemisia asiatica Nakai) is the most common species of wormwood that occurs in Korea. The usage of this edible leaves of mugwort is rather various. It is used not only for wormwood bath but also as forage, moxa and medicinal agents. Recently Kim et al reported from their study on the effect of mugwort on the motility of isolated intestine of rabbits that tonus and motility were markedly enhanced by mugwort but this effect of mugwort on intestinal motility was almost completely blocked by atropine suggesting that activity of mugwort was exerted through its cholinergic effect. It was the findings of Kim et al that prompted the authors to do the present experiment. The present study was undertaken to investigate effects of mugwort(Artemisia asiatica Nakai) juice on the respiration and blood pressure in cats. And also studied was the mechanism of depressor action of Artemisia asiatica Nakai Juice (AAJ). The results obtained are as follows; 1) It was observed that mean arterial blood pressure and heart rate were decreased markedly by AAJ. Following administration of 0.15 ml/kg and 0.3 ml/kg AAJ into cats the maximum depressor responses observed were $77.5{\pm}2.2\;mmHg$ and $94.0{\pm}3.7\;mmHg$ respectively. 2) Depressor responses to AAJ were blocked markedly by atropine whereas the responses were not affected by propranolol and dibenamine. Therefore it is strongly inferred that depressor action of AAJ results mainly from its cholinergic effect. This inference was further substantiated by the fact that heart rate change which invariably accompanies depressor responses to AAJ was almost completely abolished by atropinization. 3) After administration of AAJ into cats frequency of respiration was markedly increased while depth of respiration decreased during first 2-3 seconds.

• The Journal of Korean Academy of Prosthodontics
• /
• v.50 no.1
• /
• pp.29-35
• /
• 2012

Purpose: The purpose of this study was to analyze temperature change along the implant-bone interface induced by grinding the occlusal surface of implant gold prosthesis and to compare the temperature generated by grinding of prosthesis with different cooling methods. Materials and methods: The experimental gold prostheses were fabricated with dental gold alloy and castable abutment. The prostheses had 3 cylindrical protrusions on the occlusal surface with 1mm in height. Temperature was measured using 16 thermocouple wires attached to the implant fixture surface and the fixture was embedded in an acrylic resin block inside the $37^{\circ}C$ water bath. Cylinders were grinded for a period of 30 second with a low-speed handpiece with green stone point. One cylindrical protrusion was grinded without cooling, the second one was grinded with air blow, and the third one was grinded with water-spray. Results: The mean maximum temperature was measured more than $47^{\circ}C$ of the implant and the maximum temperature was measured at the cervical portion of the implant in the group without cooling. There was statistically significant difference between the group without cooling and the groups with cooling (P<.05). However, there was no significant difference at all portion of implant in the groups with cooling (P>.05). Conclusion: The results of this study support that the grinding of implant gold prosthesis without cooling may damage the peri-implant tissue. The continuous use of air blow and water-spray adjacent to prosthesis during the grinding of implant gold prosthesis may prove to be beneficial for cooling of the implant.

• The Journal of Korean Society for School & Community Health Education
• /
• v.3
• /
• pp.79-110
• /
• 2002

The purpose of this study was to provide basic data necessary for creating a more successful health enhancement program, health education and health policy which can enhance health management abilities and enable a healthy school life by examining relations between high school students' health perception, who are in early adolescence, and their health promotion behavior. The subjects in this study were 813 students from 8 high schools on Jeju Island. The collected data were analyzed with t-test and one-way ANOVA through questionnaires by researcher on the basis of advance research. The findings of this study were as belows : 1. When general characteristics were considered, health perception was more significantly affected by those who were boys, whose family income was on a higher level, who scored better in school, whose parents were more concerned about their children's health, and who had experiences of being hospitalized. Especially, the more parents were concerned about their children's health, the higher the child's self-confidence on health(p<.05), anxiety on health(p<.05), practicality on disease prevention(p<.05), self-confidence on future health(p<.01), health care ability(p<.01), and family roles on health(p<.05). The less parents were concerned about their children's health, the higher the child's anxiety on disease(p<.01) and uncertainty on future health(p<.01). 2. When students' health promotion behavior was concerned, in the area of Eating Habits, having regular meals(72.9%), moderate consumption of meat(89.7%) and a balanced diet(64%) were common, whereas having a regular breakfast(37.4%) and eating vegetables and fruits(43.6%) were rare. In the area of Exercise, all subareas such as exercising 3 or 4 times a week(76.7%), more than one hour of exercise at a time(74.9%), a short distance walk(51.8%), exercise within one hour after meals(87%), and whether wanning up or not(88.6%) were above average. In the area of Personal Hygiene, all subareas such as drinking boiled water(57.3%), washing hands after using the bathroom(71%), brushing teeth after eating(42.4%), washing up after going out(50.3%), and washing hair and taking a frequent bath(77.2%) were rare. In the area of Control of Personal Relations, consulting personal problems with family(78.7%) had a positive response, whereas meeting someone new(59.8%), maintaining sound relations with the opposite sex(47.3%), having respect for one's opinion(51.5%), and maintaining peaceful relations with people(58.4%) had rare negative results. In the area of Stress Management, not being competitive(69.4%), releasing problems(62.4%) and sleeping soundly(66.2%) were common, whereas having your own ways to relieve stress(46.8%) and having your own dreams and hopes(58.5%) were rare. 3. When general characteristics were considered, as far as relations of health promotion behavior were concerned, the boys were significantly different in the area of Eating Habits(p<0.01) and Exercise(p<0.01), and the girls were in the area of Personal Hygiene. As family economic status was high and parents were concerned about their children's health, the entire areas of health promotion behavior were significantly different. Whether or not they were hospitalized made no significant difference in statistics. 4. When their regions were considered, it comparing city to town, there was no statistically significant difference in health perception and relations of health promotion behavior according to general characteristics. As seen in the results above, high school students' level of health perception and level of practicing health promotion behavior were generally low. In conclusion, by enhancing health perception, a plan for activating health education, which can implement positive health promotion behavior, should be made.

• Korean Chemical Engineering Research
• /
• v.40 no.6
• /
• pp.769-777
• /
• 2002

Using four components - nonionic surfactants, water, hydrocarbon oil and an alcohol as cosurfactant, 12 types of cleaning agents were prepared, and their physical properties such as surface tension, viscosity, electroconductivity and phase stability were measured. As the formulated cleaning agents have low surface tensions(30.5-31.1 dyne/cm) and low viscosities (1.6-7.2 c.p.), they are satisfied with the general physical properties of water-in-oil(W/O) microemulsions for their industrial use. They showed a tendency that their temperature range for stable one-phase microemulsion decreased in accordance with the increase of alcohol/surfactant(A/S) ratio in the formulations. However, the temperature range of one-phase microemulsion was much more affected by hydrophilic lipophillic balance(HLB) value of the nonionic surfactant which increased its temperature range and it increased in accordance with the higher HLB value in the formulations. And the maximum content of water which can keep stable one-phase W/O microemulsion was measured at each sample. In addition, their temperature range for stable one-phase microemulsion was also measured. It was confirmed that the selection of surfactant type was very important for formulating a cleaning agent, since the W/O microemulsion system with the nonionic surfactant of the lower HLB value showed better cleaning efficacy that of the higher HLB value for abietic acid as a soil, which was used for preparing a rosin-type flux. In the formulated cleaning agents with the increase of A/S ratio in the formulations, however, there was no significant difference in cleaning efficacy. It was investigated that the differences of their cleaning efficacy was affected by the change of the condition of temperature and sonicating frequency as important factors in the industrial cleaning. That is, the higher, their cleaning temperature and the lower, their sonicating frequency, the more increased, their cleaning efficacy. Furthermore, using optical instruments like UV/Visable Spectrophotometer and FT-IR Spectrometer, their cleaning efficacy for abietic acid was measured. The removal of soil from the contaminated rinse water was measured by gravity separation method in the rinse bath. As a result, the cleaning agent system having the nonionic surfactant of HLB value 6.4 showed over 85% water-oil separation efficacy at over $25^{\circ}C$. Therefore, it was demonstrated in this work that the formulating cleaning agents were very effective for cleaning and economical in the possible introduction of water recycling system.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.20 no.4
• /
• pp.93-99
• /
• 2019

The purpose of this study was to investigate the bond strength between PEKK(Polyetherketoneketone) and Sinfony(3M ESPE, Seefeld, Germany) the dental composite resin by proposing the three representative surface treatment methods and evaluate to see if they affect the bond strength between two materials. A total of 30 PEKK($Pekkton^{(R)}$ Ivory, $Cendres+M{\acute{e}}taux$, Bienne, Switzerland) specimens were prepared, embedded in acrylic resin, polished(P 1200 grid) to surface, and each group was divided into 10 specimens. After then, by the surface treatment method, it classified into three groups(n=10) such as Air abrasion group(PN), applying Single Bond Universal(3M ESPE) after Air abrasion(PB), applying OPAQUE(3M ESPE) after Air abrasion(PO). Then, veneering was performed by using Sinfony(3M ESPE, Seefeld, Germany). All completed specimens were allowed to rest in a $37^{\circ}C$ water bath for 24 hours. Shear bond strength of each group was measured and fracture patterns were classified. Statistic analysis was performed with One-way ANOVA followed by post hoc Scheffe tast (p<.05). Statistical analysis was performed using the SPSSWIN 21.0 program. As a result of one-way ANOVA, the average value of PB group was $27.67{\pm}4,18MPa$ and it was shown as the highest bond strength, PN and PO were $20.43{\pm}1.70$ and $19.8{\pm}4.77MPa$ each, and these were relatively low(F=18.4, P<.001), and as the post-test the Scheffe test was conducted and verified (p<.05). After examining the scheffe test, it was showed significant differences as PB>PO, PB>PN(p<.001). Through this study, in order to enhance the bonding force between PEKK and the composite resin, perform the Air abrasion and surface treatment by using Single Bond Universal(3M ESPE) is recommended, and as coMPared with other studies. And it is assumed that the increase of the application time of the Air abrasion affects the increase of the shear bond strength. Thus, further research is required.

• Korean Journal of Animal Reproduction
• /
• v.24 no.1
• /
• pp.89-95
• /
• 2000

This study was to establish an effective dilution technique in a vitrification of bovine blastocysts for the field trial. For vitrification, blastocysts were exposed in glycerol (G) and ethylene glycol (EG) mixture in m-DPBS supplemented with 10% FBS. Blastocysts were first exposed to 10% (v/v) G for 5 min, and subsequently were transferred to 10% G plus 20% EG (v/v) for 5 min. Finally, embryos were transferred to 25% G plus 25% EG (v/v) for 30 see and were placed in nitrogen vapor for 3 min, and then were plunged into L$N_2$. At thawing, the straw containing blastocysts was placed in air for 10 sec, and then plunged into a water bath at $25^{\circ}C$ until all ice had disappeared. They were placed in $25^{\circ}C$ and 36$^{\circ}C$ water according to treatment group for different time. Also, in vitro survival was assessed by the re-expansion and hatched rates at 24 hand 48 h postwarming, respectively. The results obtained in these experiments were summarized as follows; 1) In the survival rates of vitrified bovine blastocysts according to different dilution time at thawing, the data of 1 min group (86.6, 56.6%) were higher than those of other treatment groups (2 min; 93.5, 35.4%, 2.5 min; 76.9, 30.7%, 3 min; 88.8, 36.1% and 3.5 min; 83.7, 8.1%). 2) When the in vitro survival of vitrified groups according to different developmental stage was examined at 48 h after thawing using 1 min dilution method, the hatching rates of fast developed embryos (expanded blastocyst: 81.3%: early hatching blastocyst: 86.2%) were higher than that of delayed developed one (early blastocyst: 46.6%). 3) In addition, when the in vitro survival of vitrified groups according to different embryo age was compared, the hatched rates at 48 h after thawing of Day 7 (66.6%) and Day 8 embryos (60.0%) were significantly higher than that of Day 9 embryos (22.7%) (P＜0.05). These results demonstrate that vitrified bovine IVM/IVF/IVC blastocysts can be successfully survived in vitro using one-step dilution (1 min) method.

• Asian-Australasian Journal of Animal Sciences
• /
• v.18 no.1
• /
• pp.66-74
• /
• 2005

Three experiments were conducted to study the property of xylanase and the effects of xylanase in wheat-based diets on growth performance of broilers, respectively. Experiment 1 was performed in vitro to evaluate the effect of different pH and temperature on xylanase activity, and to evaluate the enzymic stability under different conditions. The results indicated that the optimum temperature and pH for xylanase activity were $50^{\circ}C$ and 4.5, respectively. The activity of enzyme solution was reduced rapidly after the treatment of water bath above $60^{\circ}C$ for 10 min. The enzyme was relatively stable at pH 3.5 to 8.0 and deteriorated when incubated at pH below 3.5. In Experiment 2, a total of 378 d-old male Arbor Acres broilers were randomly distributed to 7 different treatments with 6 replicates (9 birds) in each treatment. The treatments were as follows: (1) corn based diet (CS), (2) wheat based diet (WS), (3) WS+ 0.05% xylanase, (4) WS+0.15% xylanase, (5) WS+0.25% xylanase, (6) WS+0.35% xylanase, (7) WS+0.45% xylanase. The results showed that the body weight and feed/gain ratio of the broilers fed wheat-based diets have been significantly improved (p<0.05) compared to that fed corn-based diet in the first 3 wk. With regard to the wheat-based diets, the xylanase supplementation had a tendency to improve the growth performance in first 3 wk. After 3 wk, no significant difference (p>0.05) was found among all these different treatments. The supplementation of xylanase and the type of diets did not affect the feed intake but increased the concentration of triglyceride in serum. In Experiment 3, a total of 360 d-old male Arbor Acres broilers were assigned to 30 groups with 12 birds in each group randomly. These groups were then randomly distributed to 5 different treatments with 6 replicates within each treatment. The broilers of each treatment were fed one of the diets as follows: (1) Corn based diet, (2) White wheat based diet (WW) (3) White wheat based diet+0.25% xylanase, (4) Red wheat based diet, (5) Red wheat based diet+0.25% xylanase. The results showed that the body weight and feed/gain ratio had been significantly improved (p<0.05) by xylanase supplementation in the first 2 or 3 wk. The effect of xylanase in red wheat diet is a little higher than that used in white wheat diet. From the results of the present experiments, it can be concluded that the supplementation of Aspergillar xylanase can improve the performance of the broilers fed the wheat-based diet.