• KSII Transactions on Internet and Information Systems (TIIS)
• /
• 제10권7호
• /
• pp.3131-3149
• /
• 2016

In-band Full-duplex (IBFD) wireless communication allows improved throughput for wireless networks. The current Half-duplex (HD) medium access mechanism Request to Send/Clear to Send (RTS/CTS) has been directly applied to IBFD wireless networks. However, this is only able to support a symmetric dual link, and does not provide the full advantages of IBFD. To increase network throughput in a superior way to the HD mechanism, a novel three-way handshaking access mechanism RTS/SRTS (Second Request to Send)/CTS is proposed for point to multipoint (PMP) IBFD wireless networks, which can support both symmetric dual link and asymmetric dual link communication. In this approach, IBFD wireless communication only requires one channel access for two-way simultaneous packet transmissions. We first describe the RTS/SRTS/CTS mechanism and the symmetric/asymmetric dual link transmission procedure and then provide a theoretical analysis of network throughput and delay using a Markov model. Using simulations, we demonstrate that the RTS/SRTS/CTS access mechanism shows improved performance relative to that of the RTS/CTS HD access mechanism.

• 한국정보과학회논문지:정보통신
• /
• 제32권3호
• /
• pp.415-426
• /
• 2005

사회적으로 큰 관심의 대상이 되고 있는 무선 인터넷은 유선 인터넷과 달리 기술 환경과 그 특성상 여러 가지 제약점들을 가지고 있다. 대역폭이 낮고, 접속이 빈번하게 끊기며, 단말기내의 컴퓨팅 파워가 낮고 화면이 작다. 또한 사용자의 이동성 문제와 네트워크 프로토콜, 보안등에서 아직 기술적으로 부족한 부분을 보이고 있다 그리고 급속도로 증가하는 수요에 따라 무선 인터넷 서버는 대용량 트래픽을 처리할 수 있는 확장성이 요구되어지고 있다. 이에 본 논문에서는 무선 인터넷 프록시 서버 클러스터를 사용하여 앞에서 언급된 무선 인터넷의 문제와 요구들을 캐싱(Caching), 압축(Distillation) 및 클러스터 (Clustering)를 통하여 해결하려고 한다. TranSend는 클러스터링 기반의 무선 인터넷 프록시 서버로 제안된 것이나 시스템적인(Systematic) 방법으로 확장성을 보장하지 못하고 불필요한 모듈간의 통신구조로 인해 복잡하다는 단점을 가진다. 기존 연구에서 시스템적인 방법으로 확장성을 보장하는 All-in-one 이라는 구조를 제안하였으나 이 역시 모듈간의 통신 구조가 복잡하고 캐시간 협동성이 없는 단점을 가진다. 이에 본 논문에서는 모듈간의 단순한 통신 구조와 캐시간 헙동성을 가지는 클러스터링 기반의 무선 인터넷 프록시 서버를 제안한다. 16대의 컴퓨터를 사용하여 실험을 수행하였고 실험 결과 TranSend 시스템과 All-in-one 시스템에 비해 각각 54.86$\%$, 4.70$\%$의 성능 향상을 보였다. 캐시서버간 데이타를 공유할 수 있기 때문에 제안된 구조에서는 캐시서버 수에 무관하게 캐시 메모리 전체 크기를 일정하게 할 수 장점을 가진다. 반면에 All-in-one에서는 각 캐시서버가 모든 캐시 데이타를 가져야 하므로 캐시 메모리 전체 크기가 캐시 서버 수에 비례하여 증가한다.

• 전기학회논문지
• /
• 제63권11호
• /
• pp.1571-1574
• /
• 2014

In this paper, we propose a unidirectional transmission of critical information obtained by keyboard hacking or kernel and keyboard driver hacking even though the computer is not connected to the external network. We show the hacking can be attempted in the proposed method to show the way preventing such attempts in advance. Firewalls and other various methods are used to prevent the hacking from the external network but the hacking is also attempted in various ways to detour the firewall. One of the most effective way preventing from the hacking attack is physically disconnect the internal intranet systems from the external internet and most of the government systems, military systems and big corporate systems are using this way as on one of the protection method. In this paper, we show the feasibility of transmission of security codes, etc via the short message to the external network on the assumption that a hacking program such as Trojan Horse is installed on the computer systems separated from the external network. Previous studies showed that the letters on the monitor can be hijacked by electromagnetic analysis on the computer to obtain the information even though the system is not connected ti the network. Other studies showed that the security code hint can obtained by analyzing the power consumption distribution of CPU. In this paper, the power consumption distribution of externally accessible power line is analyzed to obtain the information and the information can be transmitted to the external network. Software controlling the CPU and GPU usage is designed to control the power supply of computer. The sensors such as the Rogowski coils can be used on the external power line to collect the data of power consumption change rates. To transmit the user password by short message, due to the capacitive components and the obstacle from other power supply, A very slow protocol are used.

• 디지털산업정보학회논문지
• /
• 제13권3호
• /
• pp.53-64
• /
• 2017

Korean Identification card or driver license is usually used to verify one's identity in Korea. These are also used as an adult certification. Since the form of these ID card is an analog and it needs to be checked with naked eyes, it might be used maliciously. Someone who's got someone else's ID card can do other things. Therefore, it must be reported rapidly when ID card is lost or stolen. The most serious problem might be occurred when they do not recognize and report the loss. They might suffer from pecuniary or mental damage such as opening a mobile phone service, providing loan or credit card, opening a personal checking account, etc. Thus, this study suggests and compares the ways of avoiding these problems. First, the most effective way is to send the authorization code via mobile phones in consideration of build-up period and cost. The person in charge of business processing department using ID card sends the authorization code via registered mobile phone. The owners submits it to the person and their identifications are confirmed. Next effective way is that the person in charge of business processing department using ID card sends text messages via registered mobile phone. Lastly, the most ineffective way is to introduce and implement the electronic ID card ultimately even though it is expensive and takes a long time to build up the system.

• Journal of Information Processing Systems
• /
• 제7권1호
• /
• pp.29-42
• /
• 2011

Wireless sensor networks are composed of a large number of sensor nodes with limited energy resources. One critical issue in wireless sensor networks is how to gather sensed information in an energy efficient way, since their energy is limited. The clustering algorithm is a technique used to reduce energy consumption. It can improve the scalability and lifetime of wireless sensor networks. In this paper, we introduce a clustering protocol with mode selection (CPMS) for wireless sensor networks. Our scheme improves the performance of BCDCP (Base Station Controlled Dynamic Clustering Protocol) and BIDRP (Base Station Initiated Dynamic Routing Protocol) routing protocol. In CPMS, the base station constructs clusters and makes the head node with the highest residual energy send data to the base station. Furthermore, we can save the energy of head nodes by using the modes selection method. The simulation results show that CPMS achieves longer lifetime and more data message transmissions than current important clustering protocols in wireless sensor networks.

• 한국정보통신학회논문지
• /
• 제24권6호
• /
• pp.751-758
• /
• 2020

사물인터넷을 비롯한 다양한 형태의 통신을 활용한 응용분야가 생겨남에 따라 통신의 형태가 다양해지고 있다. 어떠한 응용은 빠른 피드백을 요구하기도 하고, 다른 응용은 수신여부와는 상관없이 데이터를 계속 보내기도 한다. 한 방향으로 데이터를 전송하는 것은 반대 방향 응답에 의해 확인될 수 있다. 이러한 정보 교환은 양방향 통신을 형성한다. 송신자는 수신자의 응답에 따라 다음 동작을 결정하므로 빠른 응답을 제공하는 것이 중요하다. 본 논문에서는 셀룰러 네트워크에서 양방향 통신의 전송지연 성능을 향상시키기 위한 기지국 협력 전송 기법을 제안한다. 양방향 트래픽뿐만 아니라 동일한 방향의 트래픽을 가진 협력 기지국을 활용하는 양방향 통신 기법을 고안하였다. 제안한 방식을 통하여 지연 시간 성능이 향상됨을 확인하였다.

• 대한임베디드공학회논문지
• /
• 제5권3호
• /
• pp.118-127
• /
• 2010

Inter-vehicle communication is one of the most important parts in Intelligent Vehicle System. Through this communication, drivers can recognize what is happening out of their sights, such as the freezing condition of the street, traffic accidents, and so on. Each car in IVS gives various services to the drivers after analyzing those received information from cars or a base station. If the message is, however, exchanged from car to car directly, the computation cost which is needed for all the car to authenticate the transmitted message between nearby cars is tremendously high. Therefore, one can naturally think that the message communication between cars is performed with the help of the base station to reduce the computation cost. In this case where the base station collects all the information transmitted from cars and broadcasts them nearby, there should be an efficient way both for the base station to authenticate the car message within its communication range and for the car to authenticate the information received from the base station. In this paper, we present a two-way authentication protocol using a hash chain to efficiently exchange GPS information between a car and a base station. This information can be used to provide a driver with the navigation which displays all the moving cars around him in real time. When a car goes into an area of a base station, the car authenticates itself to the base station using its private key of PKI, sends a commitment of a hash chain, then starts to send a message with the hash value for authentication. The message includes GPS information, driver's status and so on. The base station also authenticates itself to the nearby cars using its private key, transmits the commitment of the hash chain, and sends all the messages gathered from cars with authentication information.

• KSII Transactions on Internet and Information Systems (TIIS)
• /
• 제8권7호
• /
• pp.2365-2382
• /
• 2014

While single-user spatial multiplexing multiple-input multiple-output (SU-MIMO) allows spatially multiplexed data streams to be transmitted to one node at a time, multi-user spatial multiplexing MIMO (MU-MIMO) enables the simultaneous transmission to multiple nodes. However, if the transmission time required to send packets to each node varies considerably, MU-MIMO may fail to utilize the available MIMO capacity to its full potential. The transmission time typically depends upon two factors: the link quality of the selected channel and the data length (packet size). To utilize the cumulative capacity of multiple channels in MIMO applications, the assignment of channels to each node should be controlled according to the measured channel quality or the transmission queue status of the node.A MAC protocol design that can switch between MU-MIMO and multiple SU-MIMO transmissions by considering the channel quality and queue status information prior to the actual data transmission (i.e., by exchanging control packets between transmitter and receiver pairs) could address such issues in a simple but in attractive way. In this study, we propose a new MAC protocol that is capable of performing such switching and thereby improve the system performance of very high throughput WLANs. The detailed performance analysis demonstrates that greater benefits can be obtained using the proposed scheme, as compared to conventional MU-MIMO transmission schemes.

• 한국통신학회논문지
• /
• 제22권4호
• /
• pp.618-636
• /
• 1997

DQDB(Distributed Queue Dual Bus) protocol, the IEEE 802.6 standard protocol for metropolitan area networks, does not fully take advantage of the capabilities of dual bus architecture. Although fairness in bandwidth distribution among nodes is improved when using so called the bandwidth balancing mechanism, the protocol requires a considerable amount of time to adjust to changes in the network load. Additionally, the bandwidth balancing mechanism leaves a portion of the available bandwidth unused. In a high-speed backbone network, each node may act as a bridge/ router which connects several LANs as well as hosts. However, Because the existence of high speed LANs becomes commonplace, the congestionmay occur on a node because of the limitation on access rate to the backbone network and on available buffer spaces. to release the congestion, it is desirable to install some congestion control algorithm in the node. In this paper, we propose an efficient congestion control mechanism and fair and waster-free MAC protocol for dual bus network. In this protocol, all the buffers in the network can be shared in such a way that the transmission rate of each node can be set proportional to its load. In other words, a heavily loaded node obtains a larger bandwidth to send the sements so tht the congestion can be avoided while the uncongested nodes slow down their transmission rate and store the incoming segments into thier buffers. this implies that the buffers on the network can be shared dynamically. Simulation results show that the proposed probotol significantly reduces the segment queueing delay of a heavily loaded node and segment loss rate when compared with original DQDB. And it enables an attractive high throughput in the backbone network. Because in the proposed protocol, each node does not send a requet by the segment but send a request one time in the meaning of having segments, the frequency of sending requests is very low in the proposed protocol. so the proposed protocol signigificantly reduces the segment queuing dely. and In the proposed protocol, each node uses bandwidth in proportion to its load. so In case of limitation of available buffer spaces, the proposed protocol reduces segment loss rate of a heavily loaded node. Bandwidth balancing DQDB requires the wastage of bandwidth to be fair bandwidth allocation. But the proposed DQDB MAC protocol enables fair bandwidth without wasting bandwidth by using bandwidth one after another among active nodes.

• 산업경영시스템학회지
• /
• 제37권4호
• /
• pp.12-23
• /
• 2014

The O&M (Operation and Maintenance) phase of offshore plants with a long life cycle requires heavy charges and more efforts than the construction phase, and the occurrence of an accident of an offshore plant causes catastrophic damage. So previous studies have focused on the development of advanced maintenance system to avoid unexpected failures. Nowadays due to the emerging ICTs (Information Communication Technologies) and sensor technologies, it is possible to gather the status data of equipment and send health monitoring data to administrator of an offshore plant in a real time way, which leads to having much concern on the condition based maintenance policy. In this study, we have reviewed previous studies associated with CBM (Condition-Based Maintenance) of offshore plants, and introduced an algorithm predicting the next failure time of the compressor which is one of essential mechanical devices in LNG FPSO (Liquefied Natural Gas Floating Production Storage and Offloading vessel). To develop the algorithm, continuous time Markov model is applied based on gathered vibration data.