• Convergence Security Journal
• /
• v.17 no.3
• /
• pp.41-49
• /
• 2017

According to a research by global IT market research institute IDC, CSIM(Converged Security Information Management) market of Korea was estimated to be 1.7 trillion KRW in 2010, and it has grown approximately 32% every year since. IDC forcasts this size to grow to 12.8 trillion KRW by 2018. Moreover, this case study exemplifies growing importance of CSIM market worldwide. Traditional CSIM solution consists of various security solutions(e.g. firewall, network intrusion detection system, etc.) and devices(e.g. CCTV, Access Control System, etc.). With this traditional solution, the the data collected from these is used to create events, which are then used by the on-site agents to determine and handle the situation. Recent development of IoT industry, however, has come with massive growth of IoT devices, and as these can be used for security command and control, it is expected that the overall amount of event created from these devices will increase as well. While massive amount of events could help determine and handle more situations, this also creates burden of having to process excessive amount of events. Therefore, in this paper, we discuss potential events that can happen in CSIM system and classify them into 3 groups, and present a model that can categorize and process these events effectively to increase overall efficieny of CSIM system.

• The Journal of the Acoustical Society of Korea
• /
• v.24 no.6
• /
• pp.317-324
• /
• 2005

Detection and localization of a quiet target in shallow water environments is a challenging problem because of the complicated acoustic Propagation and the Prevalence of loud surface ship interference. Matched Field Processing (MFP) can help address the concern by using a Propagation model to determine the steering vectors, thus Providing optimal away gain and localization accuracy. However, Performance of MFP have yet realized in practice, for several reasons. The most important limitation is that precise information on the underwater environments is generally not available. To examine the Performance of MFP in the East Sea of Korea, we have accomplished a series of matched acoustic Properties and localization experiment (MAPLE). We analyzed the array data measured from MAPLE which is accomplished using a vertical line array and a towed acoustic source off the east cost of Korea in Oct. 2003. We localized the acoustic source using MFP. It is well known that the temperature structure in the experimental site is affected by the short period fluctuation such as internal wave. In this paper, it is found that the sidelobe level on the MFP ambiguity surface is increased being affected by the short period fluctuation.

• Design & Manufacturing
• /
• v.14 no.1
• /
• pp.8-14
• /
• 2020

In general, auto parts production assembly line is assembled and produced by automatic mounting by an automated robot. In such a production site, quality problems such as misalignment of parts (doors, trunks, roofs, etc.) to be assembled with the vehicle body or collision between assembly robots and components are often caused. In order to solve such a problem, the quality of parts is manually inspected by using mechanical jig devices outside the automated production line. Automotive inspection technology is the most commonly used field of vision, which includes surface inspection such as mounting hole spacing and defect detection, body panel dents and bends. It is used for guiding, providing location information to the robot controller to adjust the robot's path to improve process productivity and manufacturing flexibility. The most difficult weighing and measuring technology is to calibrate the surface analysis and position and characteristics between parts by storing images of the part to be measured that enters the camera's field of view mounted on the side or top of the part. The problem of the machine vision device applied to the automobile production line is that the lighting conditions inside the factory are severely changed due to various weather changes such as morning-evening, rainy days and sunny days through the exterior window of the assembly production plant. In addition, since the material of the vehicle body parts is a steel sheet, the reflection of light is very severe, which causes a problem in that the quality of the captured image is greatly changed even with a small light change. In this study, the distance between the car body and the door part and the door are acquired by the measuring device combining the laser slit light source and the LED pattern light source. The result is transferred to the joint robot for assembling parts at the optimum position between parts, and the assembly is done at the optimal position by changing the angle and step.

• Journal of Trauma and Injury
• /
• v.19 no.1
• /
• pp.54-58
• /
• 2006

Purpose: The committee on trauma of the american college of surgeons, in its manual resources for optimal care of the injured patients involved in falls from less than 20 feet need not be taken to trauma centers. Because triage criteria dictate less urgency for low-level falls, this classification scheme has demerits for early detection and treatment of serious problems in the emergency room. Methods: A prospective analysis was conducted of 182 patients treated for fall-related trauma from June 2003 to March 2004. Falls were classified as group A (<3 m), group B (${\geq}3m$, <6 m), and group C (${\geq}6m$). Collected data included the patient's age, gender, site and height of fall, surface fallen upon, body area of first impact, body regions of injuries, Glasgow Coma Scale (GCS), Revised Trauma Score (RTS), and Injury Severity Score (ISS). Results: The 182 patients were classified as group A (105) 57.7%, group B (61) 33.5%, and group C (16) 8.8%. There was a weak positive correlation between the height of fall and the patients' ISS in the three groups (p<0.001). There were significant differences in GCS (p=0.017), RTS (p=0.034), and ISS (p=0.007) between group A and B. In cases that the head was the initial impact area of the body, the GCS (p<0.001) and the RTS (p=0.002) were lower, but the ISS (p<0.001) was higher than it was for other type of injuries. Hard surfaces as an impact surface type, had an influence on the GCS (p<0.001) and the ISS (p=0.025). Conclusion: To simply categorize patients who fall over 6 meters as severely injured patients doesn't have much meaning, and though patients may have fallen less than 6 meters, they should be categorized by using the dynamics (impact surface type, initial body - impact area) of their fall.

• Journal of Korean Neurosurgical Society
• /
• v.48 no.5
• /
• pp.391-398
• /
• 2010

Objective : This study was designed to validate the cell trafficking efficiency of the in vivo bioluminescence image (BLI) study in the setting of transplantation of the luciferase expressing bone marrow-derived mesenchymal stem cells (BMSC), which were delivered at each different time after transient middle cerebral artery occlusion (MCAO) in a mouse model. Methods : Transplanting donor BMSC were prepared by primary cell culture from transgenic mouse expressing luciferase (LUC). Transient focal infarcts were induced in 4-6-week-old male nude mice. The experiment mice were divided into five groups by the time of MSC transplantation : 1) sham-operation group, 2) 2-h group, 3) 1-day group, 4) 3-day group, and 5) 1-week group. BLI for detection of spatial distribution of transplanted MSC was performed by detecting emitted photons. Migration of the transplanted cells to the infarcted area was confirmed by histological examinations. Differences between groups were evaluated by paired t-test. Results : A focal spot of bioluminescence was observed at the injection site on the next day after transplantation by Signal intensity of bioluminescence. After 4 weeks, the mean signal intensities of 2-h, 1-day, 3-day, and 1-week group were $2.6{\times}10^7{\pm}7.4{\times}10^6$. $6.1{\times}10^6{\pm}1.2{\times}10^6$, $1.7{\times}10^6{\pm}4.4{\times}10^5$, and $8.9{\times}10^6{\pm}9.5{\times}10^5$, respectively. The 2-h group showed significantly higher signal intensity (p<0.01). The engrafted BMSC showed around the infarct border zones on immunohistochemical examination. The counts of LUC-positive cells revealed the highest number in the 2-h group, in agreement with the results of BLI experiments (p<0.01). Conclusion : In this study, the results suggested that the transplanted BMSC migrated to the infarct border zone in BLI study and the higher signal intensity of LUC-positive cells seen in 2 hrs after MSC transplantation in MCAO mouse model. In addition, noninvasive imaging in real time is an ideal method for tracking stem cell transplantation. This method can be widely applied to various research fields of cell transplantation therapy.

• Weed & Turfgrass Science
• /
• v.4 no.4
• /
• pp.368-375
• /
• 2015

Earthworm cast occurred in surface of turfgrass in golf courses which affect turfgrass maintenance and golf play. In this study several survey of seasonal fluctuation of earthworm cast in different golf courses (Anseong, Gapyeong, Gunpo and Yongin in Gyeonggi province, and Geumjeong in Busan) was done. A number of earthworm, soil temperature and moisture of detection site of earthworm cast in each golf course were also done. Cast occurred in different golf courses are found mostly from April to November on turf surface and the cast number varied in different month as well as in golf courses. In the same golf courses, a number of detected cast was difference from individual sites. A number of cast and earthworm was correlated. Also, in higher soil moisture showed the higher cast density in different golf courses. Soil temperature and moisture of detecting cast ranging from $2.1^{\circ}C$ to $33.1^{\circ}C$ and 4.9 to 44.1%, respectively. In case of cast, soil temperature level lies in between $10-15^{\circ}C$ where the highest soil moisture was 25%.

• Journal of KIISE:Databases
• /
• v.28 no.3
• /
• pp.512-527
• /
• 2001

In a client-server spatial database, it is desirable to maintain the cached data in a client side to minimize the communication overhead across a network. This paper deals with the issues of concurrency and consistency of map updates in this environment. A client transaction to update map data is an interactive work and takes a long time to complete it. The map update in a client site may affect the other sites'updates because of dependencies between spatial data stored at different sites. The concurrent updates should be propagated to the other clients as well as the server to keep the consistency of map replicated in a client cache, and also the communication overhead of the update propagation should be minimized not to lose the benefit of caching. The newly proposed cache region locking with CR lock and CX lock controls the update dependency due to spatial relationships. CS lock and COD lock are suggested to use optimistic detection-based approaches for guaranteeing the consistency of cached client data. The cooperative update protocol uses these extended locking primitives and Spatial Relationship-based 2PC (SR-based 2PC). This paper argues that the concurrent updates of cached client spatial data can be achieved by deciding on collaborative updates or independent updates based on spatial relationships.

• Journal of Korean Society of Occupational and Environmental Hygiene
• /
• v.11 no.3
• /
• pp.235-240
• /
• 2001

This study was performed to compare the lead levels of 20 quality control standard samples(KOSHA:18-2000) and 72 field samples in lead-acid battery manufacturing plant between ICP and portable-XRF methods. 1. While the proficiencies of 20 quality control standard samples by ICP were 100%, those of analytic result values by XRF were 75%. 2. The correlation coefficient(r) between the reference values for quality control (REF) and the analytic result values by ICP (ICP) was 1.0(p<0.05), and simple linear regression equation and the coefficient(R2) were REF = -0.0009 + 1.016 ICP and 0.9997, respectively. 3. The correlation coefficient(r) between the analytic result values of quality control standard samples by ICP (ICP) and by XRF (XRF) was 0.975(p<0.05), and simple linear regression equation and the coefficient(R2) were ICP = -0.0003 + 1.002 XRF and 0.950, respectively. 4. The correlation coefficient(r) between the analytic result values for lead samples of a lead-acid battery manufacturing plant by ICP (ICP) and by XRF (XRF) was 0.993(p<0.05), and simple linear regression equation and the coefficient(R2) were ICP = -2.058 + 0.996 XRF and 0.987, respectively. 5. While the frequency distributions of XRF /ICP(Ratio) for each ICP concentration levels in a lead-acid battery manufacturing plant revealed high proportion in ratio range of 0.876-1.125 than in ration range of 1.126-1.375. Also, ICP concentration level in ration range of 0.786-1.125 was increased with increase of frequency distribution of XRF/ICP. 6. The limit of detection of XRF on lead was determined to be $6.11{\mu}g$/filter The data presented in this study indicated that relationship for lead level of quality control samples and field samples in a lead -acid battery manufacturing plant by ICP and portable-XRF methods was proved. The practicing industrial hygienist can use portable-XRF to produce a rapid on-site determination of lead exposure that can immediately becommunicated to workers and help identify appropriate levels of personal protection.

• The Journal of The Korea Institute of Intelligent Transport Systems
• /
• v.11 no.6
• /
• pp.123-132
• /
• 2012

Gas sensors has been used very differently that depending on following purposes; Automotive (exhaust gas, fuel mixture gas, oxygen, particulates), agriculture / food industry (fresh, stored, CO2, humidity, NH3, nitrogen oxide gas, organic gas, toxic gas emitted from pesticides and insecticides), industrial / medical (chemical gas, hydrogen, oxygen and toxic gases), military (chemical weapon), environmental measurements (CO and other air pollution consisting of sulfur and nitrogen gas), residential (LNG, LPG, butane, indoor air, humidity). The types of industrial toxic substances are known about 700 species and many of these exist in gaseous form under normal conditions. he multi-gas detection sensors will be developed for casualties that detect the most important and find easy three kinds of gases in marine plant; carbon dioxide(CO2), carbon(CO), ammonia(NH3). Package block consists of gas sensing device minor ingredient, rf front end, zigbee chip. Develope interworking technology between the sensor and zigbee chip inside a package. Conduct a performance test through test jig about prototype zigbee sensor module with rf output power and unwanted emission test. This research task available early address when poisonous gas leaked from large industrial site and contribution for workers' safety at the enclosed space.

• Journal of Appropriate Technology
• /
• v.6 no.2
• /
• pp.136-145
• /
• 2020

Agriculture is the backbone of the economy of most developing countries. In these countries, agriculture or farming is mostly done manually with little integration of machinery, intelligent systems and data monitoring. Irrigation is an essential process that directly influences crop production. The fluctuating amount of rainfall per year has led to the adoption of irrigation systems in most farms. The absence of smart sensors, monitoring methods and control, has led to low harvests and draining water sources. In this research paper, we introduce a 433 MHz Radio Frequency and 2G based Smart Irrigation Meter System and a water prepayment system for rural areas of Tanzania with no reliable internet coverage. Specifically, Ngurudoto area in Arusha region where it will be used as a case study for data collection. The proposed system is hybrid, comprising of both weather data (evapotranspiration) and soil moisture data. The architecture of the system has on-site weather measurement controllers, soil moisture sensors buried on the ground, water flow sensors, a solenoid valve, and a prepayment system. To achieve high precision in linear and nonlinear regression and to improve classification and prediction, this work cascades a Dynamic Regression Algorithm and Naïve Bayes algorithm.