• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2003년도 하계학술대회 논문집 C
• /
• pp.1559-1561
• /
• 2003

In northeast Asia, there will be several important HVDC transmission lines to be established in Korea and China for perspective electric network market. 5500V 4-inches High voltage thyristor can be used in the DC transmission and distribution of electric power system. In this application, many thyristors are connected in series for each thyristor valves. Therefore, the required low reverse-recovery charge QRR and low on-state voltage drop $V_{TM}$ for such thyristor is necessary to this application. In our work, the on-state and off-state voltage performance was simulated by commercial simulation software.

• 전기학회논문지P
• /
• 제53권2호
• /
• pp.82-88
• /
• 2004

In this study, an intelligent solenoid valve controller has been developed for efficient maintaining of filters in a dust collecting system. This controller has automatic controllability of solenoid valves' ON/OFF time depending on the clogging status of filters, and then it can extend the filters' lifetimes, decrease the power consumption, and make effective operation of the system possible. This controllability has been executed by the fuzzy theory that utilizes the workers' experimental knowledges, the control expert's knowledges and the differential pressures between the inlets and outlets measured by the sensors. The system's operation is under the continuous surveillance by using a current transformer, which warns the operators and lets them take necessary actions in case of abnormal operation.

• 설비공학논문집
• /
• 제15권11호
• /
• pp.937-942
• /
• 2003

In the present study, low-temperature low-pressure refrigerant storage method is proposed to achieve higher cooling capacity during a short period of time than that of a compressor in steady operation. Experimental apparatus was designed and set up to analyze the performance of the new-conceptual cooling system. Two reservoirs for sequential storage of refrigerant were used in the cooling system. Several on/off solenoid valves were installed for control of refrigerant flow. From the experimental results, the initial rapid cooling by low temperature low-pressure refrigerant storage method was ascertained for successful operation. This rapid cooling methodology shall be useful for other low-capacity refrigeration system.

• 한국수자원학회논문집
• /
• 제40권6호
• /
• pp.495-502
• /
• 2007

상수관망에서 다양한 제수밸브 분포간의 우열성 평가는 상수관망의 신뢰성 확보를 위해 필수적이다. 기존 상수관망에 새로운 제수밸브를 추가할 경우나 새로운 상수관망을 건설할 경우, 본 연구에서는 서로 다른 제수밸브 분포간의 우열성을 평가하여 좀 더 효율적인 제수밸브 분포를 선택할 수 있는 방법을 제안하고자 한다. 제안된 방법은 상수관 및 제수밸브의 파괴 모의를 바탕으로 하며 제수밸브 분포간의 우열성은 상수관망의 신뢰도를 기준으로 하였다. 상수관망의 신뢰도는 상수관 파괴당 평균적인 단수인구로 나타내지며 충분한 횟수의 상수관 및 제수밸브 파괴모의를 통해서 산정하였다. 제안된 방법의 적용성을 평가하기 위하여 실제 상수관망을 대상으로 새로운 제수밸브를 추가할 경우 두가지 다른 밸브분포를 결정한 후 우열성을 판별하였다. 또한 다양한 제수밸브 신뢰도에 따른 관파괴당 평균단수인구를 산정하여 제수밸브 신뢰도가 상수관망의 신뢰도 향상에 미치는 영향을 검증하였다.

• 제어로봇시스템학회:학술대회논문집
• /
• 제어로봇시스템학회 1992년도 한국자동제어학술회의논문집(국내학술편); KOEX, Seoul; 19-21 Oct. 1992
• /
• pp.303-308
• /
• 1992

In this study, we propose a shared storage system which is more efficient policy than MIS(Mixed Intermediate Storage) policy for relatively rare storage system and can be called CIS(Common Intermediate Storage) policy. Using this strategy, we develop a new completion time algorithm and apply it to two kinds of optimal or near optimal scheduling method; combinatorial search and simulated annealing method. We also extend this strategy to other storage policy, for example MIS policy, with PLC(Programmable Logic Controller) logic and on/off action of electronic valves. It thus can be accepted as a basic form of FMS(Flexible Manufacturing System) for operating various storage policies. Finally we suggest the interlocking block to compansate for the shortcoming of CIS policy, i.e, complication of operation and safety, resulting in a basic batch process automation mode.

• 한국지열·수열에너지학회논문집
• /
• 제12권4호
• /
• pp.21-26
• /
• 2016

In this study, the control strategies of indoor air temperature in floor radiant heating system were researched by computer simulation. The temperature difference based time control method using the difference of indoor set temperature and indoor temperature is compared with the existing On-Off control one for heating control performances. As a result, the temperature difference based time control method shows better thermal environmental characteristics in case of selected operational conditions in comparison with existing control one.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2000년도 하계학술대회 논문집 D
• /
• pp.2605-2607
• /
• 2000

This paper represents the construction of a PLC simulator for the level control of water and the speed control of the water cask. The level and speed processes are automatically operated by the PLC. The simulator system consists of PLC, program loader and control penal. The digital input and output units make the valves of the water cask the On or Off state. The analog input and output units control the level of water and the speed of the water cask. A LD program is used in the control language of PLC.

• 한국철도학회논문집
• /
• 제20권5호
• /
• pp.569-576
• /
• 2017

전동차의 공기 작동식 출입문을 작동하기 위한 공기를 공급 또는 차단의 역할을 하는 전자변은 고장발생시 승객의 안전은 물론 정상운행을 불가능하게 하는 중요한 부품이므로 높은 신뢰도가 요구되지만 누기로 인한 고장 비율이 높은 편이다. 국내 도시철도 운영기관들은 고정주기와 임의 여유기간을 적용한 전동차 중정비 주기로 전자변을 정비한다. 현행 중정비 주기 방식의 대안으로 고장 신뢰도를 고려한 정비주기를 제시하고자 지하철 6호선 전동차 전자변 고장 통계자료에 상용 통계프로그램(MINITAB)을 적용하여 신뢰도 함수(Reliability Function)와 임무신뢰도(Mission Reliability)를 계산하고 적정 정비주기를 도출하였다. 도출된 정비 주기는 현 4년 주기의 정비의 부품신뢰도를 68%에서 95%로 향상시키는 것이므로 전자변의 신뢰도를 획기적으로 향상시킬 수 있을 것이다.

• 한국자동차공학회논문집
• /
• 제10권3호
• /
• pp.192-200
• /
• 2002

Semi-active suspension systems are greatly expected to be in the mainstream of future controlled suspensions for passenger cars. In this study, a continuous variable damper for a passenger car suspension is developed, which is controlled actively and exhibits high performance with light weight, low cost, and low energy consumption. To get fast response of the damper, reverse damping mechanism is adapted, and to get small pressure change rate after blow-off, a pilot controlled proportional valve is designed and analyzed. The reverse continuous variable damper is designed as a HS-SH damper that offers good body control with reduced transferred input force from tire, compared with any other type of suspension system. The damper structure is designed, so that rebound and compression damping force can be tuned independently, of which variable valve is placed externally. The rate of pressure change with respect to the flow rate after blow-off becomes smooth when the fixed orifice size increases, which means that the blow-off slope is controllable using the fixed orifice size. The damping force variance is wide and continuous, and is controlled by the spool opening, of which scheme is usually adapted in proportional valves. The reverse continuous variable damper developed in this study is expected to be utilized in the semi-active suspension systems in passenger cars after its performance and simplicity of the design is confirmed through real car test.

• 비파괴검사학회지
• /
• 제19권6호
• /
• pp.426-432
• /
• 1999

발전설비를 구성하는 주요 기기중 펌프, 발브, 배관 등의 용접부에 발생할 수 있는 균열 등의 결함을 검출하기 위한 plus-point 와전류검사탐촉자를 설계하여 결함을 검출하고 그 크기를 측정할 수 있는 검사기법을 연구하였다. 차동형 모드로 운전되는 plus-point 와전류탐촉자는 2개의 "I"자형 코일 이 십자형태로 교차되어 있으며, 탐촉자와 시험체 표면사이의 lift-off 변화에 의한 영향이 재래식 표면 탐촉자에 비해서 작게 발생하는 특징이 있다. 결함에 대한 탐촉자 반응을 평가하기 위해서 304 스텐 인레스강 용접부에 인공결함인 균열성 노치를 방전가공하여 시험편을 제작하였으며, 이를 활용하여 plus-point 와전류탐촉자의 결함 검출, 종류 판별 및 크기를 측정 할 수 있는 기법을 연구하였다.