• 전기의세계
• /
• 제17권2호
• /
• pp.6-10
• /
• 1968

The conversive limitation of electric energy for the thyristor inverter is analysed under the boundary conditions which the term of a negative inverse voltage is longer than that of the turn off time of the thyristor under commutation. It is clear that the maximum electric energy conversion is affected by the turn off time of the thyristor, the reactance of a commutation reactor, the capacity of a commutation condenser and the voltage of Direct current source. It is useful for design the thyrister invertor and the motor speed control to apply the above conclusion.

• 한국인터넷방송통신학회논문지
• /
• 제14권3호
• /
• pp.1-6
• /
• 2014

최근 네트워크회선 사용비용의 안정화로 인해 IP방송과 통신장비가 확대 보급되고 있으나, TV, DID와 같은 멀티미디어에는 고가의 네트워크 시스템을 이용한 통합관리 시스템을 사용하고 있지 않다. 제안된 멀티미디어 통합 TCU(terminal control unit)는 Wake-on-Lan을 셋탑박스에 탑재한 후에 기존 네트워크의 IP통신망을 사용하여 TV전원의 On/Off의 상태 확인 및 원격제어, 전원 제어 예약 기능(관제실 소프트웨어 지원), TV채널 변경, 다양한 인터페이스 입출력 AC전원 & Lan포트, RS-232C, IR등을 지원하는 제어기기로 기존에 저가의 제어기기로 사용되던 RF방식과는 다르게 24시간 감시 및 제어할 수 있다. 높은 가격과 확장성이 전무한 기존 제어장비에서 24시간 모니터링 기능과 자동제어 시스템 지원과 저가격인 TCU(Termial Control Unit)의 개발은 폭넓은 사용처를 확보할 것으로 예상된다.

• 전기학회논문지
• /
• 제57권8호
• /
• pp.1356-1361
• /
• 2008

A switched reluctance generator(SRG) has simple magnetic structure, and needs simple power electronic driving circuit. But, a SRG are no windings or permanent magnets on the rotor, and there are concentrated windings placed around each salient pole on the stator. Because of the characteristics of time-sharing excitation, the control of SRG is very flexible. And there are several parameters for controlling SRG, such as switch turn-on angle, switch turn-off angle, and exciting voltage and controlling mode, all these will affect the generation greatly. A SRG has positive torque at increasing inductance region and negative torque at decreasing inductance region. In this paper, we studied characteristics about the switch turn-on and off angles according to switch method for constant output voltage of the fixed speed SRG. It is the acoustic noise and torque ripple characteristics. Characteristics for a switch angle and method are presented by experiment using a 50W SRG with 12/8 poles.

• Journal of Biosystems Engineering
• /
• 제30권6호통권113호
• /
• pp.327-332
• /
• 2005

In this study, the electronic power steering control system was developed and it was carried out to investigate experimentally the effect of the steering force for the on-road and off-road. The electronic power steering control system was engineered new trend system of power steering control system for tractor. It was composed of the electronic controller, detector, motor and mechanism mounted on tractor chassis. It was tested at the field in condition of tractor traveling speed 0 km/h, 3 km/h, 8 km/h, 11 km/h, 15 km/h, 18 km/h, 22 km/h, 25 km/h for measuring a maximum steering force. As a speed of tractor increased, a steering force decreased regardless of on-road or off-road. In addition, it is sufficiently a possibility of application of the steering system of tractor.

• Journal of Power Electronics
• /
• 제16권6호
• /
• pp.2327-2337
• /
• 2016

The mode-switching control of transient process is important to grid-connected 400 Hz solid-state power supply systems. Therefore, this paper analyzes the principle of on-grid and islanding operation of the system with or without local loads in the grid-connected process and provides a theoretical study of the effect of different switching sequences on the mode-switching transient process. The conclusion is that the mode switch (MS) must be turned on before the solid-state switch (STS) in the on-grid process and that STS must be turned off before the MS in the off-grid process. A strategy of mode-switching smooth control for transient process of the system is proposed, including its concrete steps. The strategy utilizes the average distribution of peak currents and the smooth adjustment of peak currents and phases to achieve a no-shock grid connection. The simulation and experimental results show that the theoretical analysis is correct and that the method is effective.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2003년도 하계학술대회 논문집 A
• /
• pp.399-402
• /
• 2003

In this paper, the on line volt/var control algorithms of the food Load Tap Changer (LTC) transformer and Shunt Capacitor(SC) are proposed for distribution volt/var regulation. In the existing volt/var control of the distribution substation, the voltage of feeders and var of distribution systems is mainly controlled by the LTC transformer tap position and on/off status of the shunt capacitor. The LTC and shunt capacitor bank has discrete operation characteristics and therefore it is very difficult to control volt/var at the distribution networks within the satisfactory levels. Also there is limitation of the operation times of the LTC and shunt capacitor bank because it is affects on their functional lifetime. The proposed volt/var control algorithm determine an optimal tap position of LTC and on/off status of shunt capacitors at a distribution network with the multiple feeders. The mathematical equations of the proposed method are introduced. Simple case study was performed to verify the effectiveness of the proposed method.

• 한국추진공학회:학술대회논문집
• /
• 한국추진공학회 2006년도 제27회 추계학술대회논문집
• /
• pp.113-115
• /
• 2006

Stout & Snell[1]이 수행했던 설계 과정을 기초로 하여 우주발사체 추진제 가압시스템 설계에 대한 기본적인 내용을 정리한다. 발사체 설계 초기 결정되어야 하는 가압시스템 요구 조건과 전반적인 시스템에 대한 물리적인 모델에 대한 내용을 소개하고, 온/오프 솔레노이드 밸브를 이용하는 가압 제어 시스템 설계에 대한 기본적인 내용 간략히 정리한다.

• 한국공작기계학회:학술대회논문집
• /
• 한국공작기계학회 2000년도 춘계학술대회논문집 - 한국공작기계학회
• /
• pp.153-158
• /
• 2000

This paper addresses an intelligent robot control system using an off-line programming to teach a precise assembly task of electronic components in a flexible way. The investigated task consists of three job: heat caulking test, soldering on a circuit board, and checking of soldering defects on the back cover of a camera. This study investigates the remodelling of the most complicated cell in terms of the accuracy and fault rate among the twelve cells in a camera back-cover assembly line. We have attempted to enhance back-cover assembly line. We have attempted to enhance soldering quality, to add task flexibility, to reduce failure rate, and to increase product reliability. This study modifies the cell structure, and improves the soldering condition. The developed all system implements the real-time control of assembly with vision data, and realized an easier task teaching on off-line programming.

• KSII Transactions on Internet and Information Systems (TIIS)
• /
• 제11권10호
• /
• pp.5149-5167
• /
• 2017

Reducing energy consumption in a wireless video sensor network (WVSN) is a crucial problem because of the high video data volume and severe energy constraints of battery-powered WVSN nodes. In this paper, we present an adaptive dynamic resizing approach for a SRAM communication buffer in a WVSN node in order to reduce the energy consumption and thereby, to maximize the lifetime of the WVSN nodes. To reduce the power consumption of the communication part, which is typically the most energy-consuming component in the WVSN nodes, the radio needs to remain turned off during the data buffer-filling period as well as idle period. As the radio ON/OFF transition incurs extra energy consumption, we need to reduce the ON/OFF transition frequency, which requires a large-sized buffer. However, a large-sized SRAM buffer results in more energy consumption because SRAM power consumption is proportional to the memory size. We can dynamically adjust any active buffer memory size by utilizing a power-gating technique to reflect the optimal control on the buffer size. This paper aims at finding the optimal buffer size, based on the trade-off between the respective energy consumption ratios of the communication buffer and the radio part, respectively. We derive a formula showing the relationship between control variables, including active buffer size and total energy consumption, to mathematically determine the optimal buffer size for any given conditions to minimize total energy consumption. Simulation results show that the overall energy reduction, using our approach, is up to 40.48% (26.96% on average) compared to the conventional wireless communication scheme. In addition, the lifetime of the WVSN node has been extended by 22.17% on average, compared to the existing approaches.

• 한국정보통신학회:학술대회논문집
• /
• 한국정보통신학회 2016년도 추계학술대회
• /
• pp.602-604
• /
• 2016

본 논문에서는 블루투스를 기반으로 실내의 조명, LED 그리고 알람시계를 제어할 수 있는 것을 제안한다. 제안된 블루투스 기반 LED 알람 무드등(Bluetooth based LED Alarm Lamp)은 블루투스 모듈을 이용하여 ON/OFF를 할 수 있으며, 조도센서 및 전압을 변압시켜 ON/OFF 및 빛 밝기를 조정할 수 있도록 설계하였다. 또한 7-segment를 이용하여 시계를 표시하였고 피에조 부조를 이용하여 시간에 맞춰 알람을 울리게 할 수 있도록 설계하였다. 그리고 터치센서를 이용하여 전압을 낮춰 빛 밝기를 조절할 수 있다. 또한 알람을 맞출 수 있는 기능을 추가하였다. 본 작품(블루투스 기반 LED 알람 무드등)은 환경이 어두울 때 전압이 유지되고 있다면 자동으로 ON되는 시스템으로 거주자의 방에 안락한 내부 환경을 제공할 수 있다. 그리고 약한 불빛으로 인한 수면 시간의 질을 향상시킬 수 있는 것에 중점을 두어 설계하였다.