• The Plant Pathology Journal
• /
• v.35 no.3
• /
• pp.219-233
• /
• 2019

Soybean cultivars susceptible to Phytophthora root and stem rot are vulnerable to seed rot and damping-off of seedlings and young plants following an infection by Phytophthora sojae. In this study, the disease responses of Japanese soybean cultivars including currently grown main cultivars during the early growth stages were investigated following infections by multiple P. sojae isolates from Japanese fields. The extent of the resistance to 17 P. sojae isolates after inoculations at 14, 21, and 28 days after seeding varied significantly among 18 Japanese and two US soybean cultivars. Moreover, the disease responses of each cultivar differed significantly depending on the P. sojae isolate and the plant age at inoculation. Additionally, the treatment of 'Nattosyo-ryu' seeds with three fungicidal agrochemicals provided significant protection from P. sojae when plants were inoculated at 14-28 days after seeding. These results indicate that none of the Japanese soybean cultivars are completely resistant to all tested P. sojae isolates during the first month after sowing. However, the severity of the disease was limited when plants were inoculated during the later growth stages. Furthermore, the protective effects of the tested agrochemicals were maintained for at least 28 days after the seed treatment. Japanese soybean cultivars susceptible to Phytophthora root and stem rot that are grown under environmental conditions favorable for P. sojae infections require the implementation of certain practices, such as seed treatments with appropriate agrochemicals, to ensure they are protected from P. sojae during the early part of the soybean growing season.

• Korean Chemical Engineering Research
• /
• v.60 no.4
• /
• pp.506-511
• /
• 2022

In the Chemicals Control Act, a system was implemented to unify off-site risk assessment and risk management plan into the prevention and management system for chemical accidents. Among the hazardous chemicals which have been covered in system, the accident preparation substances are designated as chemical substances that are likely to occur and of which damage scale are likely to be large in the event of chemical accidents. In this study, risks were compared by selecting accident preparation substances with similar regulated quantities. In addition, risk assessment studies were conducted applying the accident scenarios. Four types of materials such as ammonia, hydrogen chloride, carbon disulfide and benzene were selected for the study, and risks were finally analyzed using Safeti 8.0, a quantitative risk assessment program by DNV. As a result, some materials are identified to have high risks comparing to other substances having similar regulated quantities.

• Tuberculosis and Respiratory Diseases
• /
• v.84 no.3
• /
• pp.237-244
• /
• 2021

Background: The emergence of drug-resistant tuberculosis (TB), is a major menace to cast off TB worldwide. Line probe assay (LPA; GenoType MTBDRplus ver. 2) and Xpert MTB/RIF assays are two rapid molecular TB detection/diagnostic tests. To compare the performance of LPA and Xpert MTB/RIF assay for early diagnosis of rifampicin-resistant (RR) TB in acid-fast bacillus (AFB) smear-positive and negative sputum samples. Methods: A total 576 presumptive AFB patients were selected and subjected to AFB microscopy, Xpert MTB/RIF assay and recent version of LPA (GenoType MTBDRplus assay version 2) tests directly on sputum samples. Results were compared with phenotypic culture and drug susceptibility testing (DST). DNA sequencing was performed with rpoB gene for samples with discordant rifampicin susceptibility results. Results: Among culture-positive samples, Xpert MTB/RIF assay detected Mycobacterium tuberculosis (Mtb) in 97.3% (364/374) of AFB smear-positive samples and 76.5% (13/17) among smear-negative samples, and the corresponding values for LPA test (valid results with Mtb control band) were 97.9% (366/374) and 58.8% (10/17), respectively. For detection of RR among Mtb positive molecular results, the sensitivity of Xpert MTB/RIF assay and LPA (after resolving discordant phenotypic DST results with DNA sequencing) were found to be 96% and 99%, respectively. Whereas, specificity of both test for detecting RR were found to be 99%. Conclusion: We conclude that although Xpert MTB/RIF assay is comparatively superior to LPA in detecting Mtb among AFB smear-negative pulmonary TB. However, both tests are equally efficient in early diagnosis of AFB smear-positive presumptive RR-TB patients.

• The Journal of the Korea institute of electronic communication sciences
• /
• v.18 no.4
• /
• pp.641-648
• /
• 2023

Recently, the rapid growth of artificial intelligence among the 4th industrial revolution has progressed based on the performance improvement of semiconductor, and circuit integration. According to transistors, which help operation of internal electronic devices and equipment that have been progressed to be more complicated and miniaturized, the control of heat generation and improvement of heat dissipation efficiency have emerged as new performance indicators. The DUT(Device Under Test) Shell is equipment which detects malfunction transistor by evaluating the durability of transistor through heat dissipation in a state where the power is cut off at an arbitrary heating point applying the rating current to inspect the transistor. Since the DUT shell can test more transistor at the same time according to the heat dissipation structure inside the equipment, the heat dissipation efficiency has a direct relationship with the malfunction transistor detection efficiency. Thus, in this paper, we propose various method for PCB configuration structure to optimize heat dissipation of DUT shell and we also propose various transformation and thermal analysis of optimal DUT shell using computational fluid dynamics.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2022.05a
• /
• pp.101-103
• /
• 2022

CCTV is mainly used as a real-time detection system for critical facilities. In the case of CCTV, although the accuracy is high, the viewing angle is narrow, so it is used in combination with a sensor such as a radar. LiDAR is a technology that acquires distance information by detecting the time it takes to reflect off an object using a high-power pulsed laser. In the case of lidar, there is a problem in that the utilization is not high in terms of cost and technology due to the limitation of the number of simultaneous processing sensors in the server due to the data throughput. The detection method by the optical mesh sensor is also vulnerable to strong winds and extreme cold, and there is a problem of maintenance due to damage to animals. In this paper, by using the 1550nm wavelength band instead of the 905nm wavelength band used in the existing lidar sensor, the effect on the weather environment is strong and we propose to develop a system that can integrate and control multiple sensors.

• Journal of Advanced Navigation Technology
• /
• v.27 no.5
• /
• pp.658-665
• /
• 2023

Take-off weight is a key factor for improving accuracy when estimating an aircraft's carbon emissions and fuel consumption. However, the takeoff weight contains sensitive payload information that can infer the airline's management strategy, making it impossible to leak it outside. Although several models for estimating takeoff weight have been presented in previous studies, the researcher points out that there are limitations of the study caused by variables at the pilot's discretion. In this paper, several variables related to takeoff weight are identified to suggest a way to control these limits. Among them, variables that can improve the accuracy of takeoff weight are selected and an estimation equation is presented by applying them to ADS-B information. The proposed estimation does not estimate the average takeoff weight but has the advantage of being able to estimate all ranges of the takeoff weight.

• Transactions of the Korean hydrogen and new energy society
• /
• v.34 no.5
• /
• pp.456-464
• /
• 2023

In this study, a compact hydrogen liquefaction system was constructed with the aim of creating a data storage and monitoring program for liquid hydrogen production. This program was designed to receive and record signals from diverse control equipment through the LabVIEW software. A range of measurement instruments were devised to collect data, encompassing variables such as flow rate, pressure, temperature, and liquid level. As a result, it was possible to directly check the production of liquid hydrogen by obtaining various data of condensed liquid hydrogen. In addition, it was confirmed that long-term storage of liquid hydrogen is possible by developing automatic ON/OFF through the LabVIEW program.

• The Journal of the Acoustical Society of Korea
• /
• v.28 no.1
• /
• pp.70-76
• /
• 2009

In speech communications in noisy environments, speech intelligibility is seriously degraded due to the masking effect of ambient noise. In this paper, a new method to improve speech intelligibility in noisy environments is proposed. Based on the perception theory that the temporal envelope plays a major role in determining intelligibility, the proposed method uses a novel operation that enhances the fluctuation of band-wise temporal envelope and also contains pitch enhancement for improving speech naturalness. In addition, a new subjective evaluation scheme employing binaural listening is proposed in order to measure more reliable performance. The subjective performance measured with the proposed scheme shows that the proposed method improves both intelligibility and naturalness in various environments, whereas a function parameter can control the performance trade-off between intelligibility and naturalness.

• The Journal of Korean Medicine
• /
• v.29 no.3
• /
• pp.38-49
• /
• 2008

Objectives: Though overt thyroid dysfunction is well recognized to affect serum lipid profiles and obesity, there are conflicting reports on the effect of subclinical hypothyroidism on serum lipid profiles and obesity. In most reports, the definition of the upper normal limit of serum thyroid stimulation hormone (TSH) of 4.0${\sim}$5.0mU/L has been used to diagnose. However, recent studies have suggested a much lower TSH cut off with an upper limit of 2.5mU/L, because >95% of rigorously screened normal euthyroid volunteers had serum TSH values between 0.4 and 2.5mU/L. Therefore we defined subclinical hypothyroidism as a TSH level greater than 2.5mU/L. We sought to evaluate the correlations of subclinical hypothyroidism with obesity index and serum lipid profiles Methods: TSH levels were measured in 6190 men and 4223 women that participated in health examination and free T4, lipid profiles (total-cholesterol, triglyceride, LDL-C), and obesity index (body mass index, body fat, waist circumference, C-reactive protein) were also measured. Results: There were significant differences of triglyceride between subclinical hypothyroidism men and normal control subjects. In women, there were also significant differences of triglyceride and LDL-C between subclinical hypothyroidism and normal control subjects. Subclinical hypothyroidism women showed significant correlations of TSH with total cholesterol, LDL-C, triglyceride, and C-reactive protein. Subclinical hypothyroidism men and women with a TSH level 2.5${\sim}$4.0mU/L had significant differences of triglyceride and body fat. In men, there were significant differences of waist circumference andC-reactive protein. In women, there were significant differences of LDL-C. Conclusions: We have demonstrated correlations of subclinical hypothyroidism with serum lipid profiles and obesity index. These findings suggested that subclinical hypothyroidism people had an increased risk of dyslipidemia and obesity. Subclinical hypothyroidism people with a TSH level 2.5${\sim}$4.0mU/L may be also considered suspect since it may signal a case of evolving thyroid underactivity eligible to be prevented.

• Journal of Bio-Environment Control
• /
• v.19 no.4
• /
• pp.343-350
• /
• 2010

This study was conducted to investigate the effect of harvest seasons on quality and microbial population at different steps of production chain of fresh-cut iceberg lettuce. Iceberg lettuces harvested in May, June, July, October, and December were processed following industrial practices, and stored at $5^{\circ}C$ for 9 days. For microbial measurement, samples were taken from each of the following steps: harvest, transport, pretreatment, cutting, 1st-washing, 2nd-washing, and day 3, 6, and 9 of storage. Iceberg lettuce cultivated in protect house and harvested in May and October showed higher $CO_2$ levels in the packages and electrolyte leakages than lettuce harvested in June, July and December. Microbial population of raw materials harvested in July was highest (6.76 log), and microbial growth rate during storage was highest in samples harvested in May. Lettuce harvested in June had better quality and microbial safety compared to other lettuces. Although lettuce harvested in October and December had less microbial population in either raw materials or processed products, those samples had inferior quality due to off-odor development and severe browning. Therefore, it is required to maintain quality and ensure microbial safety to distribute fresh-cut lettuce with high quality and safety throughout the year.