• Journal of Electrical Engineering and Technology
• /
• v.10 no.3
• /
• pp.755-765
• /
• 2015

A thermostatically controlled load (TCL) can be one of the most appropriate resources for demand response (DR) in a smart grid environment. DR capability can be effectively implemented in a TCL with various intelligent control methods. However, because traditional on-off control is still a commonly used method in a TCL, it is useful to develop a method for adding DR capability to the TCL with an existing on-off controller. As a specific realization of supervisory control for implementing DR capability in the TCL, two methods are proposed - a method involving the changing of a set point and a method involving the paralleling of an identified system without delay. The proposed methods are analyzed through the simulations with an electric heater for different power consumption levels in the on-state. Considerable cost benefit can be achieved with the proposed methods when compared with the case without DR. In addition, the observations suggest that a medium power consumption level, instead of the maximum power, in the on-state should be used for consistently obtaining the cost benefit without severe temperature deviation from the specified temperature range for DR.

• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 2003.06a
• /
• pp.1012-1017
• /
• 2003

The development of a fast, accurate, and inexpensive position-controlled pneumatic actuator that may be applied to a variety of practical positioning applications with various external loads is described in this paper. A novel modified pulso width modulation (MPWM) valve pulsing algorithm allows on/off solenoid valves to be used in place of costly servo valves. A comparison between the system response of standard PWM technique and that of the novel modified PWM technique shows that the control performance is significantly increased. A state feedback controller with position, velocity and acceleration feedback is successfully implemented as the continuous controller. Switching algorithm of control parameter using learning vector quantization neural network (LVQNN) is newly proposed. which estimates the external loads of the pneumatic actuator. The effectiveness of the proposed control algorithms are demonstrated through experiments with various loads.

• Journal of Industrial Technology
• /
• v.30 no.B
• /
• pp.75-81
• /
• 2010

This paper presents the development of LED street light lamp which is controled by central command system. This system includes a lamp unit controller, data repeater and command repeater as well as the LED lamps. These devices enable the individual power control and partial on/off control of the LED lamps by the control repeater through full duplex communication line. Also, they have the ability to control the brightness and period of on/off timing by detecting the car's existence. As a result of this development, it is founded that the performances of the system have been satisfied to apply for the actual road test.

• Transactions of the Korean Society of Automotive Engineers
• /
• v.5 no.1
• /
• pp.1-13
• /
• 1997

The key point that guarantees the durability of the ceramic monolith filter is to lower peak temperature and temperature gradient inside filter during regeneration. The control of the exhaust gas flow rate into the filter, by the bypass technique of the exhaust gas, enables the gas temperature in filter to be constant for regeneration. A couple of methods, which are the ON/OFF and PID control of the bypass valve, were used for feedback control of the gas temperature. These techniques showed that the ceramic filter was regenerated perfectly under the peak temperature and peak temperature gradient limitations for durability.

• Journal of the Korean Institute of Telematics and Electronics
• /
• v.22 no.3
• /
• pp.31-42
• /
• 1985

Thig paper used two feedback sensors, that is, potentiometer and tachometer in order to control DC motor. Also, the state feedback and kalman regular type in the linear system or the state feedback and on-off relay type in the non-linear system are used as control meth-ods for optimal control values. This compared and analyzed the control estimate of tracking angles by the estimate of three branches of methods of position and speed measured, position and speed by PD and position, speed and covariance by an observer.

• Journal of the Korean Society of Safety
• /
• v.18 no.1
• /
• pp.94-100
• /
• 2003

Generally, cable-stayed bridges are both statically indeterminate structure with a high degree of redundancy and flexible structure. So it is very important to ensure precision control during both fabrication and construction. In precision control of cable-stayed bridges, precision control under multi-objective programming method is needed, because precision control problem of cable-stayed bridges is a multi-objective programming problem in which many objective functions are regard as variables. In previous studies, it was regarded as a single-objective problem, so it had many problems in respect of usefulness and rationalness. In this study, precision control under multi-objective programming method is proposed considering economy, efficiency, and safety at best in precision control of cable-stayed bridges. Precision control problem of cable-stayed bridges is formulated with satisfying trade-off method which is a kind of multi-objective programming method, then it is optimized with min-max method. A computer program is presented including above process.

• Journal of Korean Society of Water and Wastewater
• /
• v.26 no.6
• /
• pp.915-925
• /
• 2012

On-off control performance of target pumping station was experimented by changing measurement methods for storage level or inflow and operating logic for control system setting. Four scenarios with different measurement methods and operational logic were examined in the Matlab/Simulink environment. Controller's on-off control repetition that was frequent before has been reduced and more effective and stable system operation was found to be possible with the scenarios. Moreover, defensive operation enforced prevention of floods by changing measurement methods enabled economic operation that made an utmost use of storage volumes.

• Proceedings of the KIEE Conference
• /
• 2011.07a
• /
• pp.1412-1413
• /
• 2011

Effects of thermal annealing on electrical characteristics of thin film transistors (TFTs) using hydrogenated zinc oxide (ZnO:H) films as active channel were extensively investigated. The ZnO:H films were deposited at room temperature by RF sputtering. The device parameters of the ZnO:H-based TFTs, such as threshold voltage ($V_{th}$), subthreshold swing (S.S.), and on-off current ratio ($I_{on}/I_{off}$), were characterized in terms of the annealing temperature as well as the gas flow ratio of $H_2$/Ar.

• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 1997.04a
• /
• pp.107-111
• /
• 1997

Pressure control is possible by pulse width modulation signal driving a simple ON/OFF 2-way valve of hydraulic servo system. But it indices pressure fluctuation due to repeated on-off action and the pressure varies according to the duty ratio and carrier frequency. So mean pressure and ripple amplitude are arranged by experimental study as the driving signal change which decides the pressure characteristics. As the result selection criteria of the major design parameters may be established and the basic strategy to suppress the unnecessary flucturion may be provided for a hydraulic pressure control system.

• Journal of Ginseng Research
• /
• v.26 no.1
• /
• pp.10-16
• /
• 2002

In replicated field trials, the efficacy of pentachloronitrobenzene (PCNB; quintozene) for control of damping-off of ginseng seedlings was found to be affected by timing of application and formulation. Application at the time of seeding and prior to placement of straw mulch was found to provide the moat consistent level of disease control. However, decline in plant stand during the four-year production cycle resulted in most treatments providing similar levels of plant populations at harvest. Soil residues of pentachloronitrobenzene were generally highest (1 $\mu\textrm{g}$ PCNB/g soil) in those treatments that exhibited the highest levels of disease control in the seedling year. Straw contained high levels of quintozene after application. Beet seed assays with artificially-infested soils indicated that current use rates provide an amount of product suitable for high levels of disease control.