• 제목/요약/키워드: on-glass antenna

검색결과 27건 처리시간 0.035초

다층 유전체에서 임의의 형상을 갖는 마이크로스트립 안테나의 해석 (Analysis of Arbitrarily-Shaped Microstrip Antenna in Multi-Layered)

  • 김상진;김영식;천창율
    • 대한전기학회:학술대회논문집
    • /
    • 대한전기학회 1998년도 하계학술대회 논문집 E
    • /
    • pp.1821-1823
    • /
    • 1998
  • In this paper, arbitrarily-shaped microstrip patch antenna in multi-layered is analyzed using spatial domain MoM. The triangular patch function is adopted here as the expansion function for planar arbitrarily-shaped microstrip. For example, an edge-fed rectangular patch antenna on a single-layered substrate is analyzed. The results show the agreement between the calculation and measurement.

  • PDF

다중 선로가 로딩된 T-DMB 수신용 차량 글래스 안테나 설계 (Design of a Multi-Stripline Loaded On-Glass Antenna for T-DMB Applications)

  • 강우준;계영철;박슬기;오정훈;추호성
    • 한국전자파학회논문지
    • /
    • 제20권7호
    • /
    • pp.664-672
    • /
    • 2009
  • 본 논문에서는 다중 선로를 로딩시킨 새로운 구조의 글래스 안테나를 설계하였다. 제안된 안테나는 광대역 주파수 특성을 얻기 위하여 중심 선로에 다중 선로를 로딩하였으며, 수직 편파 복사 이득을 개선하기 위하여 이중 중심 선로 구조를 채택하였다. 세부적인 설계 변수는 Pareto 유전자 알고리즘을 이용하여 최적화하였으며, 이러한 설계 변수를 바탕으로 글래스 안테나를 실제 차량 유리에 인쇄한 후 측정하였다. 측정 결과, T-DMB 중심 주파수를 기준으로 49 %의 반전력 대역폭과 -3 dBi 이상의 전면 방향(bore- sight direction) 수직 편파 복사 이득, azimuth 방향에서 평균 -10 dBi 이상의 수직 편파 복사 이득을 보였다.

Horn Antenna를 이용한 콘크리트 보강재의 박리탐사 실험 (Delamination Detection of Retrofitted Concrete Using Horn Antenna)

  • 임홍철;조영식
    • 비파괴검사학회지
    • /
    • 제27권5호
    • /
    • pp.409-416
    • /
    • 2007
  • 최근 탄소섬유, 유리섬유 등 보강재의 사용이 증가함에 따라 내구성저하의 원인이 될 수 있는 콘크리트와 보강재 사이의 박리탐사 필요성이 대두된다. 본 연구에서는 중심주파수가 15 GHz이고, 대역폭이 10 GHz인 horn antenna 를 이용하여, 탄소섬유 및 유리섬유시트 보강 콘크리트 박리를 탐사하는 실험을 실시하였다. 실험에 사용된 시편은 길이 $600\;{\times}$$600\;{\times}$ 두께 100 mm 의 크기를 가지며, 그 표면에 1.5 mm 두께의 탄소섬유 유리섬유를 에폭시로 부착하였다. 또한, 시편의 중앙에 길이 $50\;mm\;{\times}$ 폭 50 mm 크기의 박리를 콘크리트 표면 밑에 각각 두께 2, 4, 6 mm로 만들어 매립하였고, 콘크리트 표면 위에 2 mm 두께로 만들어, 인공박리를 제작하였다. 제작된 시편은 섬유의 종류에 따라 각각 4종류씩 총 8개의 시편이 제작되었다. 실험 결과는 그래프의 면적차이를 이용한 결과처리방법으로 처리하였고, 실험 결과 탄소섬유와 유리섬유시편에 매립된 인공 박리를 찾아내어, 향후 콘크리트/보강재 박리탐사시스템 개발에 도움이 되는 자료를 제공할 것이다.

Common Mode Stub를 이용한 Flexible T-DMB 안테나 구현 (Design Flexible T-DMB Antenna with Common Mode Stub)

  • 이선현;김호진;이상석;이영훈
    • 한국전자파학회논문지
    • /
    • 제22권6호
    • /
    • pp.605-612
    • /
    • 2011
  • 본 논문에서는 차량 앞유리에 탈부착이 가능한 다이폴 형태의 T-DMB 수신용 안테나를 설계하였다. 안테나의 구조는 동박과 급전선의 매우 간단한 구조를 가지며, 운전자의 시야에서 완벽히 벗어날 수 있도록 차량 유리의 테두리 쪽에 존재한다. 차체의 특성과 안테나의 입력 임피던스 특성을 고려하여 제안된 미앤더 형태의 다이폴 안테나는 T-DMB 주파수 대역(174~216 MHz)을 만족한다. Common Mode Stub를 추가한 Flexible 안테나는 차량 앞유리에서 부착되는 위치에 상관없이 안테나의 입력 반사 손실은 -5 dB 이하를 가지는 것이 가장 큰 특징이다.

신호의 투과/반사법을 이용한 복합재료 샌드위치 구조 속으로의 안테나 삽입 (Antenna Integration with Composite Sandwich Structure using Transmission/Reflection Methods of Incident Wave)

  • 유치상;황운봉
    • 한국복합재료학회:학술대회논문집
    • /
    • 한국복합재료학회 2005년도 춘계학술발표대회 논문집
    • /
    • pp.55-58
    • /
    • 2005
  • The present study aims to design electrically and structurally effective antenna structures in order that the structural surface itself could become the antenna. The basic design concept is composite sandwich structure in which microstrip antenna is embedded and this is termed composite smart structure (CSS). The most important outstanding problem is that composite materials of structural function cannot be used without reducing antenna efficiency. Unfortunately, such materials have high electrical loss. This is a significant design problem that needs to be solved in practical applications. Therefore, the effects of composites facesheet on antenna performances are investigated in the first stage and changes in the gain of microstrip antenna due to composites facesheet have been determined. ‘Open condition’ is defined when gain is maximized and is a significant new concept for the design of high-gain antennas considering bandwidth in practical application. The open condition can be made with the outer facesheet by controlling its position. In the design of CSS, glass/epoxy composites and Nomex honeycomb were used with exploiting open condition. Experiments, confirm that the gain is improved and the bandwidth is also as wide as specified in our requirements. With the open condition, wideband antenna can be integrated with mechanical structures without reducing any electrical performances, as confirmed experimentally here.

  • PDF

항공기용 양면 인쇄형 글래스 안테나 설계 (Design of a Double-Faced Window Printed Antenna for Aircraft Applications)

  • 변강일;한원근;추호성
    • 한국전자파학회논문지
    • /
    • 제22권2호
    • /
    • pp.131-139
    • /
    • 2011
  • 본 논문에서는 커플링 급전 구조를 가지는 항공기용 양면 인쇄형 글래스 안테나를 제안하였다. 제안된 안테나는 한 개의 급전 선로와 다중 루프 형상의 방사 소자로 구성되며, 조종석 좌측 창문의 서로 다른 면에 위치하여 제한된 면적을 효율적으로 사용하도록 하였다. 제안된 안테나는 유전자 알고리즘을 이용하여 최적화 하였으며, 최적화된 안테나를 1/10 크기의 KUH-Surion에 장착하여 안테나 성능을 측정하였다. 최적화된 안테나는 해당 대역의 중심 주파수에서 33 %의 반전력 대역폭을 가지며, 평균 -3.49 dBi의 전면 방향 복사 이득을 갖는다. 제안된 글래스 안테나의 수신 성능을 평가하기 위해 반경 200 km에서의 수신 전력을 시뮬레이션 하였으며, 그 결과 현재 항공기용 FM 안테나로 사용 중인 pole 안테나와 비슷한 -60 dBm의 최소 수신 전력을 유지하는 것을 확인하였다.

복합재료를 이용한 통신용 지능구조물 설계 및 제작 (Design and Fabrication of Composite Smart Structures for Communication)

  • 유치상;황운봉
    • 한국소음진동공학회:학술대회논문집
    • /
    • 한국소음진동공학회 2005년도 춘계학술대회논문집
    • /
    • pp.346-349
    • /
    • 2005
  • The present study aims to design electrically and structurally effective antenna structures in order that the structural surface itself could become the antenna. The basic design concept is composite sandwich structure in which microstrip antenna is embedded and this is termed composite smart structure (CSS). The most important outstanding problem is that composite materials of structural function cannot be used without reducing antenna efficiency. Unfortunately, such materials have high electrical loss. This is a significant design problem that needs to be solved in practical applications. Therefore, the effect of composites facesheet on antenna performances is studied in the first stage. Changes in the gain of microstrip antenna due to composites facesheet have been determined. 'Open condition' is defined when gain is maximized and is a significant new concept in the design of high-gain antennas considering bandwidth in practical application. The open condition can be made with any thickness of outer facesheet by controlling its position. In the design of CSS, glass/epoxy composites and Nomex honeycomb were used with exploiting open condition. Experiments, confirm that the gain is improved (over 11 dBi) and the bandwidth is also as wide as specified in our requirements (over 10% at 12.2 GHz). With the open condition, wideband antenna can be integrated with mechanical structures without reducing any electrical performances, as confirmed experimentally here.

  • PDF

유리접지면 최적화를 통한 글래스 안테나의 성능 향상 기법 (The Method of Performance Improvement for On-Glass Antennas by Optimizing the Surface of the Window Ground)

  • 안승범;한원근;추호성
    • 한국전자파학회논문지
    • /
    • 제22권2호
    • /
    • pp.140-147
    • /
    • 2011
  • 본 논문에서는 차량 후면 유리에 여러 주파수 대역의 안테나를 집적화할 수 있는 유리접지를 이용한 안테나 급전 방법을 제안하였다. 유리접지가 가능하도록 동축 선로를 유리접지면에 직접 연결할 수 있는 어댑터를 설계하였으며, 차체 접지 방식과 반사 손실을 비교 분석하였다. Azimuth 방향에서 높은 복사 이득을 얻기 위해 유리 접지의 크기와 위치를 최적화 하였으며, 도출된 유리접지면을 이용하여 삼각 패치 형상의 WiBro 안테나를 상용세단의 후면 유리에 인쇄하고 반사 손실과 복사 패턴 성능을 측정하였다. 제안된 유리접지를 이용한 급전 방식은 차체 접지를 이용한 급전 방식과 유사한 반사 손실을 보이며, 2 dB 높은 azimuth 복사 이득이 나타내었다. 측정 결과, 제안된 유리접지면을 이용한 안테나 급전 방식을 이용하면 여러 주파수에서 동작하는 다양한 형태의 온-글래스 안테나를 후면 유리에 효과적으로 적용할 수 있음을 확인하였다.

Design and Analysis of Microstrip Line Feed Toppled T Shaped Microstrip Patch Antenna using Radial Basis Function Neural Network

  • Aneesh, Mohammad;Kumar, Anil;Singh, Ashish;Kamakshi, Kamakshi;Ansari, J.A.
    • Journal of Electrical Engineering and Technology
    • /
    • 제10권2호
    • /
    • pp.634-640
    • /
    • 2015
  • This paper deals with the design of a microstrip line feed toppled T shaped microstrip patch antenna that gives dualband characteristics at 4 GHz and 6.73 GHz respectively. The simulation of proposed antenna geometry has been performed using method of moment based IE3D simulation software. A radial basis function neural network (RBFNN) is used for the estimation of bandwidth for dualband at 4 GHz and 6.73 GHz respectively. In RBFNN model, antenna parameters such as dielectric constant, height of substrate, and width are used as input and bandwidth of first and second band is considered as output of the network. To validate the RBFNN output, an antenna has been physically fabricated on glass epoxy substrate. The fabricated antenna can be utilized in S and C bands applications. RBFNN results are found in close agreement with simulated and experimental results.

Design of a Flexible Planar RFID Tag Antenna with Low Performance Degradation from Nearby Target Objects

  • Choo, Jae-Yul;Ryoo, Jeong-Ki;Choo, Ho-Sung
    • Journal of electromagnetic engineering and science
    • /
    • 제11권1호
    • /
    • pp.1-4
    • /
    • 2011
  • In this letter, we propose a novel tag antenna that has low performance degradation with nearby dielectric material. We obtained a stable reading performance and a broad matching bandwidth on nearby dielectric materials by employing a T-matching network with thick line width and capacitively slot-loaded arms. We then built the proposed antenna and measured the tag sensitivity to examine the reading characteristics with nearby dielectric materials. The measured results clearly demonstrate stable tag sensitivity with various nearby dielectric materials, such as foam, acrylic-plastic, glass, and ceramic plates. To more closely observe the antenna characteristics with nearby dielectric materials, we also examined the impedance variation and surface current distribution with respect to the dielectric constant of nearby target objects, which ranged from $1{\times}{\varepsilon}_0$ to $16{\times}{\varepsilon}_0$.