• Bulletin of the Korean Chemical Society
• /
• v.33 no.12
• /
• pp.3950-3956
• /
• 2012

In order to improve the bioactivity and mechanical properties of hydroxyapatite (HAp), chitosan (Chi) was in situ combined into HAp to fabricate a composite scaffold by a sublimation-assisted compression method. A highly porous film with sufficient mechanical strength was prepared and the bioactivity was investigated by examining the apatite formed on the scaffolds incubated in simulated body fluid. In addition, the cytotoxicity of the HAp/Chi composite was studied by evaluating the viability of murine fibroblasts (L-929 cells) exposed to diluted extracts of the composite films. The apatite layer was assessed using scanning electronic microscopy, inductively coupled plasma-optical emission spectrometry and weight measurement. Composite analysis showed that a layer of micro-sized, needle-like crystals was formed on the surface of the composite film. Additionally, the WST-8 assay after L-929 cells were exposed to diluted extracts of the composite indicated that the HAp/Chi scaffold has good in vitro cytocompatibility. The results indicated that HAp/Chi composites with porous structure are promising scaffolding materials for bone-patch engineering because their porous morphology can provide an environment conductive to attachment and growth of osteoblasts and osteogenic cells.

• Journal of the Society of Naval Architects of Korea
• /
• v.30 no.2
• /
• pp.43-53
• /
• 1993

There exist two difficulties in the nonlinear wave-body problems. First is the abrupt behavior near the intersection point between the body and the free surface, and second is the far field treatment. In this paper, the far field treatment is considered. The main idea is the Taylor series expansion of free-surface geometry and the application of F.F.T. algorithm. The numerical step is as follows. The velocity potential is expressed by the Green's theorem. and the solution is obtained by iteration method. In the iteration stage, the expressions by the Green's theorem are transformed to the convolution forts with the expansion of free surface by the wave slope. Here F.F.T. is applied, so the computing time can be of O(Nlog N) where N is the number of unknowns. The numerical analysis is carried out and the results are compared with other results in linear floating body problem and nonlinear moving pressure patch problem, and good agreements are obtained. Finally nonlinear floating body radiation problem is carried out with computing time of O(Nlog N).

• Journal of Biomedical Engineering Research
• /
• v.38 no.5
• /
• pp.264-270
• /
• 2017

A Doppler radar sensor was applied to detect respirations and heartbeats of persons who were lying on a bed. This study is preliminary study aiming at non-contact and non-intrusive respiration and heart rate monitoring during sleep in daily life. For the experiments, 10GHz Doppler radar with patch-type antenna was used and installed on the upper right and the distance between the body and the antenna was 1 m. The results show that each signal of respiration and heartbeat is observed in each frequency band however the frequency band and the waveform vary according to the subjects and the posture. The results show that the heartbeats can be detected with the peak detection in some frequency band. This study shows the feasibility of applying the Doppler radar to detection of heartbeat and respiration during sleep and further studies about heartbeat detection algorithm are required.

• Proceedings of the KSR Conference
• /
• 2007.11a
• /
• pp.35-50
• /
• 2007

A contact patch between the wheel and the rail supports the train body and a traction power comes from it when rolling stocks run on the railroad. Friction force between the wheel and rail makes the train move on the rail. Whenever the train runs on the rail, the wheels and rails wear down by frictions inevitably. So it must be shaped by the lathe or changed for the safety train operation and the comfortable ride. Until now, many measures were carried out in order to prevent a wear and tear of the wheels. For example loop line railway in Kun Ja depot and Ji Chuk depot. This document reports the wheel changing data taken by maintenances department for the period before and after 1996 in the 1.2.3.4 lines in Seoul metro.

• Journal of Navigation and Port Research
• /
• v.38 no.6
• /
• pp.623-627
• /
• 2014

In recent years, wireless communication technologies in human body have received an increasing attention and the research on an antenna that can be worn also has been actively conducted. In this paper, an wearable antenna that can receive GPS signal frequency is proposed. The antenna was manufactured by using a copper polyester fabric with thickness of 0.08mm as a radiator and a ground plate, and a goatskin with thickness of 0.7mm as dielectric substrate. Cutting edges placed in diagonal direction of square patch in order to obtain a circular polarization characteristic, and the conductive cloth and leather was laminated by using a conductive epoxy. First, goatskin dielectric constant was obtained through the simulation and measurement of resonance frequency of the three square patch antennas with different size. On the basis of the results, an antenna operating in the GPS band was designed and the performance of the antenna was validated by making the experiment. The change of the characteristic of the antenna that is located on the shoulder parts of the clothing and wearing person were measured. And it was confirmed that the reception sensitivity has a similar level as compared to the commercially produced ceramic GPS antenna.

• Journal of Electrical Engineering and Technology
• /
• v.12 no.1
• /
• pp.317-328
• /
• 2017

This paper presents design and specific absorption rate analysis of a 2.4 GHz wearable patch antenna on a conventional and electromagnetic bandgap (EBG) ground planes, under normal and bent conditions. Wearable materials are used in the design of the antenna and EBG surfaces. A woven fabric (Zelt) is used as a conductive material and a 3 mm thicker Wash Cotton is used as a substrate. The dielectric constant and tangent loss of the substrate are 1.51 and 0.02 respectively. The volume of the proposed antenna is $113{\times}96.4{\times}3mm^3$. The metamaterial surface is used as a high impedance surface which shields the body from the hazards of electromagnetic radiations to reduce the Specific Absorption Rate (SAR). For on-body analysis a three layer model (containing skin, fats and muscles) of human arm is used. Antenna employing the EBG ground plane gives safe value of SAR (i.e. 1.77W/kg<2W/kg), when worn on human arm. This value is obtained using the safe limit of 2 W/kg, averaged over 10g of tissue, specified by the International Commission of Non Ionization Radiation Protection (ICNIRP). The SAR is reduced by 83.82 % as compare to the conventional antenna (8.16 W/kg>2W/kg). The efficiency of the EBG based antenna is improved from 52 to 74 %, relative to the conventional counterpart. The proposed antenna can be used in wearable electronics and smart clothing.

• Journal of information and communication convergence engineering
• /
• v.6 no.2
• /
• pp.172-176
• /
• 2008

This paper presents a novel feeding structure of the triple-band internal antenna which covers CELLVLAR/DCS/US-PCS bands. The proposed antenna consists of a U-slot patch radiator with a shorting post connected with ground plane and symmetric feeding lines with respective a feeding and shorting posts on both faces of the fixed FR-4 substrate. Through the simulation and experimental results, the proposed antenna is confirmed to have the features of less interference with a human head/body, broad bandwidth, desirable radiation patterns and efficiency for triple-band applications.

• Proceedings of the KIEE Conference
• /
• 2002.07d
• /
• pp.2710-2711
• /
• 2002

Conventional direct moxibustion remedy for cancer medical treatment has used a number of moxa lump for a surgical operation of patient However such a remedy has troubles in operating the moxibustion and causes the risk of burn. In order to get rid of the problems we have suggested the multiple heating pad with the Artemisia patch.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.22 no.9
• /
• pp.904-911
• /
• 2011

This paper deals with transmission characteristics of a new dual resonant structure for designing waveguide band-pass filter. The structure which has a pass-band between two adjacent stop-bands in a single body consists of circular ridged aperture and four armed conducting patch. The dual resonant behavior of the structure can be represented by a combination of LC series and parallel resonant circuits. Also these resonant properties can be easily controlled by varying the geometry of the aperture and four armed conducting patch. Actually, the structure is fabricated on the microstrip substrate by use of etching technique so that it is formed an iris type resonator which can be easily put into the transverse plane of the waveguide. We use WR-90 standard waveguide, adapters, and VNA(vector network analyzer) to measure the resonant characteristics of the structure. It is very useful to design and to improve the cutoff skirts characteristics in the waveguide band-pass filter design area.

• Journal of Chest Surgery
• /
• v.33 no.6
• /
• pp.476-486
• /
• 2000

Background: Pulmonary atresia with intact ventricular septum(PA/IVS) is an anatomically heterogenous anomaly with a variety of surgical strategies possible. The purpose of the study is to evaluate the influence of right ventricular size on the early and midterm results of surgical repair of PA/IVS. Material and method: Medical records of 20 consecutive patients with PA/IVS operated on between January 1993 and August 1999 were retrospectively reviewed. There were 12 boys and 8 girls whose ages ranged from 2 days to 14.5 months (median 6 days). Their body weight ranged from 2.52kg to 9.35 kg(median 3.18kg). The preoperative Z-value of the diameter of the tricuspid valve(T-valve) was less than or -4 in 5 patients, between -4 and -2 in 1, between -2 and 0 in 7, between 0 and 2 in 6, and greater than or 2 in 1. All patients who had z-value of tricuspid valve greater than -2.05 were attempted biventricular repair(n=15) and all patients who had it smaller than -4.4 underwent systemic-pulmonary shunt operation only(n=3) or bidirectinal cavopulmonary shunt with right ventricular reconstruction(n=2). Result: Two early deaths(2/20, 10%) occurred. Both were infants who underwent transannular patch with shunt. One of these two had huge right ventricle(Z-value of tricuspid valve = 5). There were 2 late non-cardiac deaths 3 and 7 months after operations respectively. Follow-up was completed in all children at a mean of 35.3 months(range, 5 to 54 months). 10 of 11 survivors who underwent transannular patch or valvotomy with or without shunt procedure were in NYHA functional class I even though some of them had small interatrial communication or patent shunt. All three patients who had shunt procedure only at initial palliation completed Fontan procedures with no death. Two patients who underwent right ventricular outflow reconstruction with bidirectional cavopulmonary shunt were also in good condition. Conclusion: The transanular RVOT patch or valvotomy with or without systemic-pumonary shunt as an initial palliative procedure to achieve biventricular repair for the patients who had neither too small nor too large right ventricle(-2.05$\leq$Z-value of T-value of T-valve$\leq$2) could be performed at low operative risk(1/14 7.1%). Systemic-pulmonary shunt procedure and bidirectional cavopulmonary shunt procedure for the patients who had small right ventricle(Z-value of T-valve$\leq$4.4) could be also performed with low risk. But a patient with huge right atrium and ventricle(Z-value of t-valve=5) had poor operative result.