• Structural Engineering and Mechanics
• /
• v.46 no.3
• /
• pp.387-402
• /
• 2013

A dynamic load protocol has been used to experimentally simulate fatigue behavior in cold-formed metal panels with screwed connections under wind loading. The specific protocol adopted is an adaptation of SIDGERS, originally developed for non-metallic membranes, which is composed of levels each under increasing load values. A total of 19 tests were performed on 3.35 m long by 0.91 m wide panels, identified as Type B-wide rib and Type E, both with screw connections at the edge and at the center, thus conforming two-span specimens. In some configurations the panels were fixed at the valleys, whereas crest-fixed connections were also investigated. Reinforcing the connections by means of washers was also investigated to evaluate their efficiency in improving fatigue capacity. The experimental results show maximum load capacities in improved connections with washers of approximately twice of those with classical connections.

• Ocean and Polar Research
• /
• v.27 no.1
• /
• pp.35-44
• /
• 2005

The bathymetric and gravity data were obtained in 2001 and 2003 during a survey of seamounts in the northwest of the Marshall Islands, western Pacific. The study areas are located in the Pigafetta Basin which is the oldest part of the Pacific plate and in the Ogasawara Fracture Zone which formed from the spreading ridge between the Izanagi and Pacific plates in the Jurassic. The densities of seamounts and the elastic thickness values of the lithosphere are calculated by using three-dimensional flexure modeling considering the constant sediment layer in the infinite plate model. Very low elastic thickness values (5km), relatively young seamounts, and old lithosphere in the east study area suggest the possibility of the rejuvenation of lithosphere by widespread volcanisms, whereas the elastic thickness values (15km), relatively old seamounts, and young lithosphere of the west study area are suitable for a simple cooling plate model of $300-600^{\circ}C$ isotherm. The gravity residuals of OSM6-1 and OSM6-2 suggest the possibility of different load density or elastic thickness. Relatively older OSM6-2 formed on the younger lithosphere with relatively thin elastic thickness, while younger OSM6-1 on the older lithosphere with relatively thick elastic thickness.

• Korean Journal of Veterinary Service
• /
• v.20 no.1
• /
• pp.55-67
• /
• 1997

The morphological development of lungs in fetuses of 60, 90 and 120 days of gestation and neonates of Korean native goats was investigated by light, scanning and transmission electron mictroscope. The results were summarized as follows ; 1. Gross findings ; In the 60-days-old fetus, the lung was developed and differentiated into six lobes. 2. Light microscopic findings : The gland-like bronchioles were formed in loose mesenchyme at 60 days of gestation and the bronchial wall contained smooth muscles. The loose mesenchyme had been replaced by compact parenchymal tissue at 90 days of gestation and the cartilage plates appeared in bronchial wall which contained blood vessels, submucosal glands and smooth muscles. The lung parenchyma consisted of a fine network of alveoli at 120 days of gestation and the bronchial wall contained well-developed blood vessels, submucosal glands, cartilage plates and smooth muscles. In neonates, the lung tissue was similar to the mature lung tissue and the bronchial wall contained well developed cartilage plates. 3. Scanning electron microscopic findings : The epithelial cells lining the tubules were composed of cuboidal or columnar at 60 days of gestation and the epithelial cells lining the large airways were often ciliated : some were covered with stubby microvilli. The epithelial cells lining the canals were cuboidal at 90 days of gestation and the epithelial cells lining the bronchioles were ciliated cells or nonciliated(clara) cells, The clara cells contained row microvilli. The alvealor development of this stage was rapidly progressed ; the subdivision of canals by alveolar crests and assosiated wall attenuation resulted alveoli at 120 days of gestation and the respiratory bronchioles were lined by ciliated or nonciliated epithelial cells. In neonates, the epithelial cells lining the alveolar walls were mainly covered with pneumocyte type I ; Some were covered with pneu-mocyte type II. 4. Transmission electron microscopic findings : The epithelial cells lining the tubules were adhered with tight junction at apical borders of the adjacent cells at 60 days of gestation, which contained few organells and glycogen. The epithelial cells lining the canals were composed mostly of cuboidal cell at 90 days of gestation and the epithelial cells lining of the bronchioles were ciliated of nonciliated cell, which contained few organelles and abundant glycogen. The epithelial cells lining the alveolar walls were composed of pneumocyte type I and a few pneumocyte type II at 120 days of gestation. The epithelial cells lining of the bronchioles were ciliated or nonciliated cells. In neonates, pneumocyte type I was observed as flat and thin cytoplasmic extension in shape. Otherwise, pneumocyte type II was observed as cuboidal type with apical microvilli and contained osmiophillic lamellar inclusion bodies. Putting these various experiment results together, the lung development was slowly progressed at early stage, which was rapidly progressed in the late stage of gestation.

• The korean journal of orthodontics
• /
• v.26 no.2 s.55
• /
• pp.153-162
• /
• 1996

Rapid maxillary expansion is widely used for the correction of anteroposterior discrepancies, constriction of the maxillary arch, etc. This experiment was undertaken to examine the serial changes in the osteogenesis as well as the collagen fiber bundles in the intermaxillary suture during the rapid maxillary expansion treatment. Four young female dogs aged 6 to 8 months old and not showing menarche yet were used for the experiment. The maxillary impression of dogs were taken, expansion device cast and Hyrax screw soldered at the midline in the 1st premolar area. RME device was delivered to the dogs and the activation of 0.25 mm per quarter-turn was done 2 times per day for 10 days until 5 mm separation was made. Separation of the maxilla was confirmed by X-ray. The animals were sacrificed on 0, 15, 30, 60 days from the finish of maxillary separation and preparations for light microscopy and surface electron microscopy were made. The sutures were cut into frontal serial sections for examination of the histological reactions. The following results were obtained and the conclusions made. 1. The edges of the two palatal plates bordering the midpalatal suture which at the beginning of the retention period were mainly composed of compact bone, underwent extensive resorption followed by new bone formation and gradually became spongy bone rich in bone marrow which in the 60 day retention animal became the compact bone with short intermaxillary suture space. During this transformation, newly formed trabecular bone tissues were added to the original margin. 2. Throughout the expansion period, the collagen fibers underwent successive changes such as stretching, loss of polarity, and finally fibrillogenesis. Towards the end of the expansion procedure, sharpey's fiber formation in newly formed bones were observed. 3. Bony spicules were found in the initial stage of retention on occlusal topographic X-rays, which later were confirmed to have ossified. 4. Judging from the histological changes occuring during the experimental expansion, excessive expansion will cause an excessive bleeding, and retard the remodeling of intermaxillary suture. According to the above results, the bone remodeling after rapid maxillary expansion was preceded by the migration of migratory cells into the intermaxillary suture area. The bone remodeling phenomena were on-going during the 2 months retention sample.