Journal of the Korean Society of Food Science and Nutrition
/
v.35
no.3
/
pp.373-377
/
2006
The effect of chlorella addition on the quality characteristics of processed cheese was investigated. Chlorella processed cheese was prepared in the different ratio of chlorella (0.5% (w/w) and 1.0% (w/w)). Chlorella processed cheese was stored at $10{\pm}1^{\circ}C$ and evaluated for the quality characteristics including general composition, pH, the number of microorganisms, oiling off, meltability, rheological properties, color, and sensory evaluation. Contents of moisture, protein, fat, fat in dry matter, and pH values were not different from those of control cheese. Microorganisms were not detected. The degree of oiling off showed no significant difference, but meltability decreased significantly (p<0.05). Hardness and springiness gradually increased significantly (p<0.05), while cohesiveness gradually decreased significantly (p<0.05). The L (lightness) values and the a (redness) values decreased with increasing chlorella contents, but the b (yellowness) values increased with increasing chlorella contents, so color expressed yellowish green. Compared to control cheese made by conventional way, QDA scores of color and mouthfeel of chlorella processed cheese were significantly higher (p<0.05) and the most favorite quality characteristics were shown in the processed cheese with 0.5% (w/w) chlorella (CPC1). These results suggested that health-oriented chlorella processed cheese would be made by the addition of the chlorella.
This paper describes the design and construction aspects of time-dependent deformation test apparatus for slut.oiling rocks and presents the test results obtained using these apparatus. These tests are modified semi-confined swell test, swell test under uniaxial tension and swell test under biaxial stress. These apparatus measure the time.dependent deformations in three orthogonal directions of the test specimen under simplified field stress conditions. The test results obtained from these test apparatus for the last several years show that these apparatus have performed satisfactorily. The test results show that the time-dependent deformation behaviour of the Queenston shale is cross-anisotropic with higher swelling in the vertical direction (normal to bedding plane) than in horizontal direction (parallel to bedding plane) under free swell condition. The applied stress in one direction suppresses the swelling deformation in that direction as well as that in the orthogonal directions.
An experimental approach was applied to test the effects of stranded oils and dispersant cleanup on marine gastropods, Nodilittorina exigua, littorina brevicula and Purpura clavigera. They were exposed to Labuan crude, Dubai crude and Bunker C fuel oil. Direct oil contact caused death of gastropods within 96 hours. N. exigua and L. brevicula were more sensitive than P. clavigera at the exposure of Bunker C fuel oil. Toxic effects of Bunker C oil was slower than crude oils. direct contact to concentrated dispersant killed gastropods, while clean-up with diluted dispersant still gave severe damage. P. clavigera could escape from dispersed crude oil below 250 ppm. Oiling and dispersant clean-up may have severe effects on marine gastropods by rendering them washed out to sea.
Proceedings of the Korean Society of Tribologists and Lubrication Engineers Conference
/
2004.11a
/
pp.249-254
/
2004
The pressing of car body parts is one of the most important sheet metal drawing processes. The corrosion protection oil applied by the steel mills plays a part in every sheet metal forming operation and also makes up the largest proportion of lubricants used. The idea to combine the corrosion protection properties of a corrosion preventive oil with the lubricity of a drawing oil lead to the development of the Anticorit prelubes. Applied at the finishing lines of the steel mills, they finally serve as lubricant in the press shops. A prerequisite for the suitability of a prelube-type oil is the absolute compatibility with all single processes from the coil to the Body in White. The use of prelubes in steel mills reduces the number and quantity of spot lubricants for additional press shop oiling dramatically. But their true benefits can only be fully achieved if the compatibility principle is applied throughout the manufacturing chain. Therefore, modem prelubes systems are modular, even different viscosities can be part of the same concept. This results in a far-reaching multifunctionality of the Anticorit prelube system for all applications.
The effects of homogenization conditions and $\beta$-cyclodextrin ($\beta$-CD) on cholesterol removal of Mozzarella cheese were examined. The homogenization pressure influenced markedly on the cholesterol removal in milk and, 75.64% of cholesterol, the highest rate, was removed at $70.0kg/cm^2$. In addition, an increase in temperature resulted in an increase of cholesterol removal in the range of 71.75 to 78.22%. Among different concentrations of $\beta$-CD addition, 1.0% showed 78.21% of cholesterol removal. Therefore, cholesterol-reduced Mozzarella cheese was made by cheese milk treated with 70 $70.0kg/cm^2$ homogenization at $70^{\circ}C$ and 1% $\beta$-CD addition for a subsequent study. The cholesterol reduction of cholesterol-reduced Mozzarella cheese was 63.92%. Meltability, stretchability and oiling-off in cholesterol-reduced cheese were significantly lower than those in control. Hardness, gumminess and chewiness were significantly reduced, while cohesiveness and elasticity increased. Appearance and flavor of the cheese were superior, but texture inferior to the control.
Journal of the Korean Society of Food Science and Nutrition
/
v.33
no.3
/
pp.587-592
/
2004
This research was aimed to manufacture the cholesterol free Mozzarella cheese with corn oil that contains high unsaturated fatty acid helping the reduction of serum cholesterol. Cheese stored at 1$0^{\circ}C$ was evaluated with general analysis, volatile free fatty acid, cholesterol, meltability, stretchability, color, rheological properties, and sensory evaluation. Moisture contents decreased during cheese storage period, whereas protein contents and pH value increased significantly (P < 0.05), but fat contents did not show any significant change. Linoleic acid was tile main volatile free fatty acid in a fat of cheese, and cholesterol contents were measured 4.34$\pm$ 0.04 mg/100 g in cheese. The meltability of cheese gradually increased during ripening, while the stretchability decreased. The color of cheese showed translucent yellow. Hardness, springiness, and cohesiveness increased significantly up to 21 days of storage. Compared to control cheese made by conventional way, QDA scores of shiny, oiling off, and melting of cholesterol free cheese were significantly different. These results suggested that health-oriented cholesterol free Mozzarella cheese would be made by addition of the corn oil.
Journal of Fisheries and Marine Sciences Education
/
v.24
no.5
/
pp.712-720
/
2012
Recently, many problems related on shoreline response to spill oil were exposed again on a occasion of M/T Hebei spirit accident even though the weakness on the shoreline response system has been brought up since M/T Sea Prince oil spill accident. Therefore the establishment of shoreline response system that best suits our country is needed through considering the response system of well-developed country. The socioeconomic conflict between the persons concerned on the clean-up endpoints can be sharpened in Korea because the frequency of coastal use of our country is too high compared to other countries. Thus procedural justification, that is, how the clean-up endpoints be established is more important than what type of clean-up endpoints be used. In the present paper, we attempted to suggest a new manner on the decision making system for clean-up endpoints that best suits our country. The decision making system for clean-up endpoints need to be divided into two steps, that is, set-up step of clean-up endpoints criteria and decision step of clean-up endpoints. The decision making organization of local governments play a key role in case of set-up step of clean-up endpoints criteria, while the response command headquarters under Korean coast guard and decision making organization of local governments codecide whether the clean-up endpoints criteria is fits or not.
Journal of Applied Tourism Food and Beverage Management and Research
/
v.13
no.1
/
pp.1-27
/
2002
The present study was designed to examine the effects of different homogenization pressure, homogenization temperature and $\beta$-cyclodextrin concentration on cholesterol decrease rate of Cheddar cheese, and to optimize the factors of cheese manufacture Process. Il. The hardness(control 5.46kg/$cm^2$), gumminess(control 5.24kg), chewiness(control 4.87kg/cm) reduced to 2.03kg/$cm^2$, 2.18kg, 2.24kg/cm, respectively. In the result of sensory analysis, treatment of homogenization for cholesterol removed Cheddar cheese improved appearance and flavor, however texture fell. In addition, the resent result of the study indicated that about 75.27% of cholesterol in Cheddar cheese could be removed, and the possibility of development of cholesterol decreased Cheddar cheese was observed.
The study was conducted to evaluate the feasibility of Mozzarella cheese analogue generation by using a mixture of soy milk and raw milk and to compare the quality of the resultant cheese with that of Mozzarella cheese manufactured using the traditional method. The mixtures showed increase in protein and decrease in lactose and SNF in a dose-dependent manner with the addition of soy milk. The Mozzarella cheese analogue had lower total solids content than the control cheese product, while the fat content was similar between both. The analogue cheese had lower ash content than the traditionally prepared cheese; the content was proportional to the amount of soy milk in the mixture. Higher soy milk quantities within mixtures also resulted in proportionally higher levels of fat content within analogue cheese. Water-soluble nitrogen content was lower in the analogue cheese than in the control cheese. While the WSN level increased in the control cheese, it was almost constant in the analogue cheese. The control cheese had much higher actual and predicted yield than the analogue cheese, while the analogue cheese had a higher stability level. The control cheese had a higher transfer rate than the analogue cheese, with the exception of lactose. Electrophoresis analysis showed bands for Mozzarella cheese analogues that were present in addition to the normal ${\alpha}$-casein and ${\beta}$-casein bands. Physical characteristic analysis showed that hardness was affected by the addition of soy milk to cheese, while cohesiveness and brittleness were affected by the addition of raw milk, and elasticity was barely affected by milk composition. The meltability of the control cheese was higher than that of the analogue cheese and increased during 30 days of storage at $4^{\circ}C$. Browning, oiling-off, and stretching characteristics were almost identical between the 2 types of cheeses. Sensory evaluation findings showed that the control cheese had much better body texture, appearance, and flavor than the analogue cheese.
The purpose of this study was to develop Mozzarella cheese analogues by using dairy products in the form of WPC 34, WPC 80, whey protein, demineralized whey powder, and lactose powder along with soy milk. Soy milk was separately blended with 5% WPC 34 (A), WPC 80 (B), DWP (C), WP (D), and LP (E) and also with 10% WPC 34 (F), WPC 80 (G), DWP (H), WP (I), and LP (J). Blending of soy milk and whey products showed that increase in the proportions of whey products (WPC 34, WPC 80, DWP, WP, and LP) led to increase in the protein, lactose, and SNF levels of the admixture. A decrease in fat content was observed for all cheeses prepared from mixtures, relative to those for the control cheese. The nitrogen content within analogue samples was higher than that in the control cheese and increased with increase in the proportions of whey products within soy milk. Higher water soluble nitrogen levels were observed in cheese prepared from whey-product-blended soy milk than in the control cheese. The non-protein nitrogen level within the control Mozzarella cheese was significantly lower than that in the Mozzarella analogues, and, in the case of cheese analogues, it increased with increase in the proportion of whey products in soy milk. With regard to the physicochemical and sensory qualities of the Mozzarella cheese analogues and control cheese, the pH of all analogue samples, with the exception of the cheese prepared from group G, was lower than that of the control Mozzarella cheese. Rheological studies showed that the hardness of Mozzarella cheese analogues was lower than that of the control Mozzarella, while the elasticity, cohesiveness, and brittleness of the analogues was higher. The control sample had a higher meltability level than any of the Mozzarella analogues. Mozzarella cheese prepared with the traditional method had higher browning and stretching levels than all the cheese analogues, but a lower oiling-off level.
본 웹사이트에 게시된 이메일 주소가 전자우편 수집 프로그램이나
그 밖의 기술적 장치를 이용하여 무단으로 수집되는 것을 거부하며,
이를 위반시 정보통신망법에 의해 형사 처벌됨을 유념하시기 바랍니다.
[게시일 2004년 10월 1일]
이용약관
제 1 장 총칙
제 1 조 (목적)
이 이용약관은 KoreaScience 홈페이지(이하 “당 사이트”)에서 제공하는 인터넷 서비스(이하 '서비스')의 가입조건 및 이용에 관한 제반 사항과 기타 필요한 사항을 구체적으로 규정함을 목적으로 합니다.
제 2 조 (용어의 정의)
① "이용자"라 함은 당 사이트에 접속하여 이 약관에 따라 당 사이트가 제공하는 서비스를 받는 회원 및 비회원을
말합니다.
② "회원"이라 함은 서비스를 이용하기 위하여 당 사이트에 개인정보를 제공하여 아이디(ID)와 비밀번호를 부여
받은 자를 말합니다.
③ "회원 아이디(ID)"라 함은 회원의 식별 및 서비스 이용을 위하여 자신이 선정한 문자 및 숫자의 조합을
말합니다.
④ "비밀번호(패스워드)"라 함은 회원이 자신의 비밀보호를 위하여 선정한 문자 및 숫자의 조합을 말합니다.
제 3 조 (이용약관의 효력 및 변경)
① 이 약관은 당 사이트에 게시하거나 기타의 방법으로 회원에게 공지함으로써 효력이 발생합니다.
② 당 사이트는 이 약관을 개정할 경우에 적용일자 및 개정사유를 명시하여 현행 약관과 함께 당 사이트의
초기화면에 그 적용일자 7일 이전부터 적용일자 전일까지 공지합니다. 다만, 회원에게 불리하게 약관내용을
변경하는 경우에는 최소한 30일 이상의 사전 유예기간을 두고 공지합니다. 이 경우 당 사이트는 개정 전
내용과 개정 후 내용을 명확하게 비교하여 이용자가 알기 쉽도록 표시합니다.
제 4 조(약관 외 준칙)
① 이 약관은 당 사이트가 제공하는 서비스에 관한 이용안내와 함께 적용됩니다.
② 이 약관에 명시되지 아니한 사항은 관계법령의 규정이 적용됩니다.
제 2 장 이용계약의 체결
제 5 조 (이용계약의 성립 등)
① 이용계약은 이용고객이 당 사이트가 정한 약관에 「동의합니다」를 선택하고, 당 사이트가 정한
온라인신청양식을 작성하여 서비스 이용을 신청한 후, 당 사이트가 이를 승낙함으로써 성립합니다.
② 제1항의 승낙은 당 사이트가 제공하는 과학기술정보검색, 맞춤정보, 서지정보 등 다른 서비스의 이용승낙을
포함합니다.
제 6 조 (회원가입)
서비스를 이용하고자 하는 고객은 당 사이트에서 정한 회원가입양식에 개인정보를 기재하여 가입을 하여야 합니다.
제 7 조 (개인정보의 보호 및 사용)
당 사이트는 관계법령이 정하는 바에 따라 회원 등록정보를 포함한 회원의 개인정보를 보호하기 위해 노력합니다. 회원 개인정보의 보호 및 사용에 대해서는 관련법령 및 당 사이트의 개인정보 보호정책이 적용됩니다.
제 8 조 (이용 신청의 승낙과 제한)
① 당 사이트는 제6조의 규정에 의한 이용신청고객에 대하여 서비스 이용을 승낙합니다.
② 당 사이트는 아래사항에 해당하는 경우에 대해서 승낙하지 아니 합니다.
- 이용계약 신청서의 내용을 허위로 기재한 경우
- 기타 규정한 제반사항을 위반하며 신청하는 경우
제 9 조 (회원 ID 부여 및 변경 등)
① 당 사이트는 이용고객에 대하여 약관에 정하는 바에 따라 자신이 선정한 회원 ID를 부여합니다.
② 회원 ID는 원칙적으로 변경이 불가하며 부득이한 사유로 인하여 변경 하고자 하는 경우에는 해당 ID를
해지하고 재가입해야 합니다.
③ 기타 회원 개인정보 관리 및 변경 등에 관한 사항은 서비스별 안내에 정하는 바에 의합니다.
제 3 장 계약 당사자의 의무
제 10 조 (KISTI의 의무)
① 당 사이트는 이용고객이 희망한 서비스 제공 개시일에 특별한 사정이 없는 한 서비스를 이용할 수 있도록
하여야 합니다.
② 당 사이트는 개인정보 보호를 위해 보안시스템을 구축하며 개인정보 보호정책을 공시하고 준수합니다.
③ 당 사이트는 회원으로부터 제기되는 의견이나 불만이 정당하다고 객관적으로 인정될 경우에는 적절한 절차를
거쳐 즉시 처리하여야 합니다. 다만, 즉시 처리가 곤란한 경우는 회원에게 그 사유와 처리일정을 통보하여야
합니다.
제 11 조 (회원의 의무)
① 이용자는 회원가입 신청 또는 회원정보 변경 시 실명으로 모든 사항을 사실에 근거하여 작성하여야 하며,
허위 또는 타인의 정보를 등록할 경우 일체의 권리를 주장할 수 없습니다.
② 당 사이트가 관계법령 및 개인정보 보호정책에 의거하여 그 책임을 지는 경우를 제외하고 회원에게 부여된
ID의 비밀번호 관리소홀, 부정사용에 의하여 발생하는 모든 결과에 대한 책임은 회원에게 있습니다.
③ 회원은 당 사이트 및 제 3자의 지적 재산권을 침해해서는 안 됩니다.
제 4 장 서비스의 이용
제 12 조 (서비스 이용 시간)
① 서비스 이용은 당 사이트의 업무상 또는 기술상 특별한 지장이 없는 한 연중무휴, 1일 24시간 운영을
원칙으로 합니다. 단, 당 사이트는 시스템 정기점검, 증설 및 교체를 위해 당 사이트가 정한 날이나 시간에
서비스를 일시 중단할 수 있으며, 예정되어 있는 작업으로 인한 서비스 일시중단은 당 사이트 홈페이지를
통해 사전에 공지합니다.
② 당 사이트는 서비스를 특정범위로 분할하여 각 범위별로 이용가능시간을 별도로 지정할 수 있습니다. 다만
이 경우 그 내용을 공지합니다.
제 13 조 (홈페이지 저작권)
① NDSL에서 제공하는 모든 저작물의 저작권은 원저작자에게 있으며, KISTI는 복제/배포/전송권을 확보하고
있습니다.
② NDSL에서 제공하는 콘텐츠를 상업적 및 기타 영리목적으로 복제/배포/전송할 경우 사전에 KISTI의 허락을
받아야 합니다.
③ NDSL에서 제공하는 콘텐츠를 보도, 비평, 교육, 연구 등을 위하여 정당한 범위 안에서 공정한 관행에
합치되게 인용할 수 있습니다.
④ NDSL에서 제공하는 콘텐츠를 무단 복제, 전송, 배포 기타 저작권법에 위반되는 방법으로 이용할 경우
저작권법 제136조에 따라 5년 이하의 징역 또는 5천만 원 이하의 벌금에 처해질 수 있습니다.
제 14 조 (유료서비스)
① 당 사이트 및 협력기관이 정한 유료서비스(원문복사 등)는 별도로 정해진 바에 따르며, 변경사항은 시행 전에
당 사이트 홈페이지를 통하여 회원에게 공지합니다.
② 유료서비스를 이용하려는 회원은 정해진 요금체계에 따라 요금을 납부해야 합니다.
제 5 장 계약 해지 및 이용 제한
제 15 조 (계약 해지)
회원이 이용계약을 해지하고자 하는 때에는 [가입해지] 메뉴를 이용해 직접 해지해야 합니다.
제 16 조 (서비스 이용제한)
① 당 사이트는 회원이 서비스 이용내용에 있어서 본 약관 제 11조 내용을 위반하거나, 다음 각 호에 해당하는
경우 서비스 이용을 제한할 수 있습니다.
- 2년 이상 서비스를 이용한 적이 없는 경우
- 기타 정상적인 서비스 운영에 방해가 될 경우
② 상기 이용제한 규정에 따라 서비스를 이용하는 회원에게 서비스 이용에 대하여 별도 공지 없이 서비스 이용의
일시정지, 이용계약 해지 할 수 있습니다.
제 17 조 (전자우편주소 수집 금지)
회원은 전자우편주소 추출기 등을 이용하여 전자우편주소를 수집 또는 제3자에게 제공할 수 없습니다.
제 6 장 손해배상 및 기타사항
제 18 조 (손해배상)
당 사이트는 무료로 제공되는 서비스와 관련하여 회원에게 어떠한 손해가 발생하더라도 당 사이트가 고의 또는 과실로 인한 손해발생을 제외하고는 이에 대하여 책임을 부담하지 아니합니다.
제 19 조 (관할 법원)
서비스 이용으로 발생한 분쟁에 대해 소송이 제기되는 경우 민사 소송법상의 관할 법원에 제기합니다.
[부 칙]
1. (시행일) 이 약관은 2016년 9월 5일부터 적용되며, 종전 약관은 본 약관으로 대체되며, 개정된 약관의 적용일 이전 가입자도 개정된 약관의 적용을 받습니다.