• Journal of Hydrogen and New Energy
• /
• v.26 no.6
• /
• pp.609-628
• /
• 2015

Thie study presents the biomass-derived jet (bio-jet) fuel production technologies for greenhouse gas (GHG) reduction in aviation sector. The aviation sector is responsible for the 2% of the world anthropogenic $CO_2$ emissions and the 10% of the fuel consumption: airlines' costs for fuel reach 30% of operating costs. In addition, the aviation traffic is expected to double within 15 years from 2012, while fuel consumption and $CO_2$ emissions should double in 25 years. Biojet fuels have been claimed to be one of the most promising and strategic solutions to mitigate aviation emissions. This jet fuel, additionally, must meet ASTM International specifications and potentially be a100% drop-in replacement for current petroleum jet fuel. In this study, the current technologies for producing renewable jet fuels, categorized by alcohols-to-jet, oil-to-jet, syngas-to-jet, and sugar-to-jet pathways are reviewed for process, economic analysis and life cycle assessment (LCA) on conversion pathways to bio-jet fuel.

• Proceedings of the KIEE Conference
• /
• 2004.11c
• /
• pp.532-534
• /
• 2004

The advancement of electronics and telecommunication technologies has forced the risk management system for underground metallic structures to evolve into the remote monitoring and control system. Especially, facilities such as gas pipelines, oil pipelines and water distribution lines might make hazardous effect on human safety without continuous monitoring and control. As a result, pipeline engineers have applied cathodic protection system to prevent the degradation of their facilities by corrosion and carried out a periodic monitoring of the pipe-to-soil (P/S) potentials at numberous test boxes along their pipelines. The latter action on a road in downtowns, however, is so much dangerous that the inspectors should be ready to suffer the threatening of their lives and maintenance. In order to minimize these social costs and hazards, a stand-alone type corrosion monitoring equipment which can be installed in test box, store the P/S data for given Belied and send the data by wired/wireless telecommunications is under development. In order to obtain the exact P/S data, however, a reference electrode should be located as close to the pipeline as possible. Actually, the measured potential by a conventional portable reference electrode contain inevitably an IR drop portion caused by the current flow from the cathodic protection rectifier or the subway railroad. To minimize this error, it is recommended that the reference electrode should be buried within 10 cm from the pipeline. In this paper, we describe the design parameters for fabricating the permanent type reference electrode and the characteristics of the developed reference electrode.

• Development and Reproduction
• /
• v.17 no.3
• /
• pp.241-246
• /
• 2013

To effects of sex maturation in olive flounder by regulating long photoperiod, gonadal development and GTH mRNA expression in the pituitary were investigated. Photoperiod was treated natural photoperiod and long photoperiod (15L:9D) conditions from September 2011 to March 2012. The results showed that natural photoperiodic group showed a higher gonadosomatic index (GSI) than long photoperiodic group during the spawning season (March 2012). The histological analysis of ovarian tissue showed that natural photoperiod group of ovaries contained vitellogenic oocytes, but long photoperiod group of ovaries mainly contained perinucleolus staged oocyte and oil-drop staged oocytes. The FSH mRNA of olive flounder, under natural photoperiod group, showed a significantly higher expression but no significant difference under long photoperiod group. The $LH{\beta}$ mRNA showed a significantly higher expression only under natural photoperiod group. These results may suggest that long photoperiodic information regulates secretion of pituitary FSH and LH and maintain early growing stage of gonadal development in this species.

• The Korean Journal of Pesticide Science
• /
• v.13 no.4
• /
• pp.203-208
• /
• 2009

In order to elucidate the effect of spreader-stickers on the rainfastness of dithianon and chlorothalonil wettable powders, and to estimate the possibility of suggesting good new formulations, the fungicide residues on the leaf surface of hot pepper was assessed and compared after the drop-wise applications of fungicide suspensions containing spreader-sticker on leaf surface followed by artificial raining. Three commercial spreader-stickers, which were Cover, Reitron and Silwet, not only made the rainfastness of dithianon wettable powders worse on hot pepper leaf, but increasing their concentrations also accelerated it further. On the other hand, to chlorothalonil wettable powder, Reitron showed the 3-fold improvement of rainfastness. But, for the rest, there was no improvement as well. The effect of N-octylpyrrolidone (NOP) on rainfastness of both fungicides was excellent. Soybean oil formulations containing leaf-penetrable nonionic surfactant, which was either polyoxyethylene monotridecyl ether or polyoxyethylene monolauryl ether, improved dithianon rainfastness, but the ones containing conventional emulsifiers did not.

• Journal of the Korean Society of Marine Environment & Safety
• /
• v.12 no.4 s.27
• /
• pp.267-272
• /
• 2006

Butterfly valves have been used for shut-off and throttling-control application in many industrial fields. Recently, they are frequently used for cooling water, oil system and ballast piping system of many larger vessels. They are especially suited for flow throttling control of heat exchangers in engine room. Measurement by the PIV(Particle Image Velocimetry) was conducted to investigate the flow characteristics of butterfly valve inserted within circular pipe. Flow behaviors such as instantaneous and time-mean velocity vectors are investigated. Furthermore, to reveal systematic performance of the butterfly valve, wall pressure was measured at 6 points along the pipe by digital manometer. As the valve position moves to the closed side, flow separation increases and persists its tendency downstream until smoothly uniform flow developed. The pressure loss is found to be about zero for the disk open angles less than 45 degrees, but is substantially increased for those larger than 60 degrees.

• Polymer(Korea)
• /
• v.29 no.4
• /
• pp.399-402
• /
• 2005

In this study, ethyl cellulose (EC)/montmorilloniote(MMT) nanocomposite films plasticized with environmental-friendly plasticizer (BET, EBN, ESO) were prepared by melt process using Hakke mixer. The $T_g$ of plasticized EC films decreased from 122 to $71^{circ}C$ with the increase in the BET content up to 30 $wt\%$. The addition of 10 $wt\%$ epoxidized soybean oil (ESO) as the second plasticizer cause the further drop of $T_g$ from 81 to $61^{circ}C$. The plasticizer-effect of BET was better than that of EBN. When the plasticizer was added into the EC films, the mechanical properties of EC films was decreased, however the addition of monotmorillonite (MMT) into the EC films or the ring opening reaction of ESO plasticizer cause enhancement of mechanical properties.

• Applied Chemistry for Engineering
• /
• v.21 no.3
• /
• pp.333-336
• /
• 2010

Fe/$Al_2O_3$ granules with various compositions were prepared by combining sol-gel with oil drop method for Fishcer-Tropsh reaction to produce light olefin from synthesis gas. The granules was characterized and employed as a catalyst in the reaction. The surface area of granules was decreased with increasing Fe concentration. Especially, granule with 1.5 of Al/Fe ratios showed the highest CO conversion. However, the olefin selectivity was hardly affected by Al/Fe ratio. K concentration of granule gave a significant effect on catalytic performance. Initial CO conversion and olefin selectivity were increased with K concentration. However, the catalyst with higher K concentration was deactivated rapidly.

• Korean Journal of Air-Conditioning and Refrigeration Engineering
• /
• v.20 no.9
• /
• pp.590-598
• /
• 2008

In this study, performance of R170/R290 mixtures is measured on a heat pump bench tester in an attempt to substitute R22. The bench tester is equipped with a commercial hermetic rotary compressor providing a nominal capacity of 3.5kW. All tests are conducted under the summer cooling and winter heating conditions of $7/45^{\circ}C$ and $-7/41^{\circ}C$ in the evaporator and condenser respectively. During the tests, the composition of R170 is varied from 0 to 10% with an interval of 2%. Test results show that the coefficient of performance (COP) and capacity of R290 are up to 15.4% higher and 7.5% lower than those of R22 for both conditions respectively. For R170/R290 mixture, the COP decreases and the capacity increases with an increase in the amount of R170. The mixture of 4%R170/96%R290 shows the similar capacity and COP as those of R22. For the mixture, the compressor discharge temperature is $16{\sim}30^{\circ}C$ lower than that of R22. There is no problem with mineral oil since the mixture is mainly composed of hydrocarbons. The amount of charge is reduced up to 58% as compared to R22. Overall, R170/R290 mixture is a good long term 'drop-in' candidate to replace R22 in residential air-conditioners and heat pumps.

• Asian Oncology Nursing
• /
• v.10 no.2
• /
• pp.180-190
• /
• 2010

Purpose: The purpose of this study was to compare the improvement and maintenance effects of foot reflexology (FR) on sensations after breast cancer surgery with those of lavender foot bath (LFB). Methods: Using a single-blind design, both 18 women to receive 20-min FR by trained experts and 14 women to soak feet in $40^{\circ}C$ foot tub water with 5 drop lavender essential oil, 15-min were intervened every two days. Repeated measures were taken pre 1st-(baseline-4th op. day), pre 3rd-(2nd data), and pre 5th-intervention (3rd data) with following up at 1-week after 5th intervention (4th data). The reliable translated Korean version of Baron's Breast Sensation Assessment Scale was used to assess sensations after breast cancer surgery (SABCS) characterized by prevalence, frequency, severity, and distress. Results: A significant difference between baseline and the 3rd, and a decrease tendency from baseline to the 3rd were observed for the severity and distress in FR and for the prevalence and severity in LFB. A significant or important decrease tendency between the 3rd and the 4th were observed for the severity and distress in FR and for the severity in LFB. Conclusion: Iterative FR has the improvement and maintenance effects on the severity and distress while LFB has only those on the severity.

• The Korean Journal of Pain
• /
• v.33 no.3
• /
• pp.216-225
• /
• 2020

Background: Garlic oil is a rich source of organosulfur compounds including diallyl disulfide and diallyl trisulfide. There have been studies showing the neuroprotective actions of these organosulfur compounds. However, the potential of these organosulfur compounds in neuropathic pain has not been explored. The present study was aimed at investigating the pain attenuating potential of diallyl disulfide and diallyl trisulfide in chronic constriction injury (CCI)-induced neuropathic pain in rats. The study also explored their pain-attenuating mechanisms through modulation of H₂S, brain-derived neurotrophin factor (BDNF) and nuclear factor erythroid 2-related factor 2 (Nrf2). Methods: The rats were subjected to CCI injury by ligating the sciatic nerve in four places. The development of neuropathic pain was measured by assessing mechanical hyperalgesia (Randall-Selittotest), mechanical allodynia (Von Frey test), and cold allodynia (acetone drop test) on 14th day after surgery. Results: Administration of diallyl disulfide (25 and 50 mg/kg) and diallyl trisulfide (20 and 40 mg/kg) for 14 days led to a significant reduction in pain in CCI-subjected rats. Moreover, treatment with these organosulfur compounds led to the restoration of H₂S, BDNF and Nrf2 levels in the sciatic nerve and dorsal root ganglia. Co-administration of ANA-12 (BDNF blocker) abolished pain attenuating actions as well as BDNF and the Nrf2 restorative actions of diallyl disulfide and diallyl trisulfide, without modulating H₂S levels. Conclusions: Diallyl disulfide and diallyl trisulfide have the potential to attenuate neuropathic pain in CCI-subjected rats possibly through activation of H₂S-BDNF-Nrf2 signaling pathway.