• Journal of Nutrition and Health
• /
• v.48 no.4
• /
• pp.319-326
• /
• 2015

Purpose: Borage oil (BO) and safflower oil (SO) are efficacious in reversing epidermal hyperproliferation, which is caused by the disruption of epidermal barrier. In this study, we compared the antiproliferative effect of dietary BO and SO. Altered metabolism of ceramide (Cer), the major lipid of epidermal barrier, was further determined by measurement of epidermal levels of individual Cer, glucosylceramide (GlcCer), and sphingomyelin (SM) species, and protein expression of Cer metabolizing enzymes. Methods: Epidermal hyperproliferation was induced in guinea pigs by a hydrogenated coconut diet (HCO) for 8 weeks. Subsequently, animals were fed diets of either BO (group HCO + BO) or SO (group HCO + SO) for 2 weeks. As controls, animals were fed BO (group BO) or HCO (group HCO) diets for 10 weeks. Results: Epidermal hyperproliferation was reversed in groups HCO + BO (67.6% of group HCO) and HCO + SO (84.5% of group HCO). Epidermal levels of Cer1/2, GlcCer-A/B, and ${\beta}$-glucocerebrosidase (GCase), an enzyme of GlcCer hydrolysis for Cer generation, were higher in group HCO + BO than in group HCO, and increased to levels similar to those of group BO. In addition, epidermal levels of SM1, serine palmitoyltransferase (SPT), and acidic sphingomyelinase (aSMase), enzymes of de novo Cer synthesis and SM hydrolysis for Cer generation, but not of Cer3-7, were higher in group HCO + BO than in group HCO. Despite an increase of SPT and aSMase in group HCO + SO to levels higher than in group HCO, epidermal levels of Cer1-7, GlcCer-A/B, and GCase were similar in these two groups. Notably, acidic ceramidase, an enzyme of Cer degradation, was highly expressed in group HCO + SO. Epidermal levels of GlcCer-C/D and SM-2/3 did not differ among groups. Conclusion: Dietary BO was more prominent for reversing epidermal hyperproliferation by enhancing Cer metabolism with increased levels of Cer1/2, GlcCer-A/B, and SM1 species, and of GCase proteins.

• Journal of Korea Technical Association of The Pulp and Paper Industry
• /
• v.48 no.2
• /
• pp.34-45
• /
• 2016

Global warming and climate change have been caused by combustion of fossil fuels. The greenhouse gases contributed to the rise of temperature between $0.6^{\circ}C$ and $0.9^{\circ}C$ over the past century. Presently, fossil fuels account for about 88% of the commercial energy sources used. In developing countries, fossil fuels are a very attractive energy source because they are available and relatively inexpensive. The environmental problems with fossil fuels have been aggravating stress from already existing factors including acid deposition, urban air pollution, and climate change. In order to control greenhouse gas emissions, particularly CO2, fossil fuels must be replaced by eco-friendly fuels such as biomass. The use of renewable energy sources is becoming increasingly necessary. The biomass resources are the most common form of renewable energy. The conversion of biomass into energy can be achieved in a number of ways. The most common form of converted biomass is pellet fuels as biofuels made from compressed organic matter or biomass. Pellets from lignocellulosic biomass has compared to conventional fuels with a relatively low bulk and energy density and a low degree of homogeneity. Thermal pretreatment technology like torrefaction is applied to improve fuel efficiency of lignocellulosic biomass, i.e., less moisture and oxygen in the product, preferrable grinding properties, storage properties, etc.. During torrefacton, lignocelluosic biomass such as palm kernell shell (PKS) and empty fruit bunch (EFB) was roasted under an oxygen-depleted enviroment at temperature between 200 and $300^{\circ}C$. Low degree of thermal treatment led to the removal of moisture and low molecular volatile matters with low O/C and H/C elemental ratios. The mechanical characteristics of torrefied biomass have also been altered to a brittle and partly hydrophobic materials. Unfortunately, it was much harder to form pellets from torrefied PKS and EFB due to thermal degradation of lignin as a natural binder during torrefaction compared to non-torrefied ones. For easy pelletization of biomass with torrefaction, pellets from PKS and EFB were manufactured before torrefaction, and thereafter they were torrefied at different temperature. Even after torrefaction of pellets from PKS and EFB, their appearance was well preserved with better fuel efficiency than non-torrefied ones. The physical properties of the torrefied pellets largely depended on the torrefaction condition such as reaction time and reaction temperature. Temperature over $250^{\circ}C$ during torrefaction gave a significant impact on the fuel properties of the pellets. In particular, torrefied EFB pellets displayed much faster development of the fuel properties than did torrefied PKS pellets. During torrefaction, extensive carbonization with the increase of fixed carbons, the behavior of thermal degradation of torrefied biomass became significantly different according to the increase of torrefaction temperature. In conclusion, pelletization of PKS and EFB before torrefaction made it much easier to proceed with torrefaction of pellets from PKS and EFB, leading to excellent eco-friendly fuels.

• Korean Journal of Microbiology
• /
• v.39 no.4
• /
• pp.267-271
• /
• 2003

Burkholderia sp. D5, a polyaromatic hydrocarbons(PAHs)-degrading bacterium, was isolated from oil-contaminated soil. The bacterium could utilize phenanthrene (Phe) as a sole carbon source but could not use pyrene (Pyr). However, the strain could degrade Pyr when a cosubstrate such as yeast extract (YE) was supplemented. The PAH degradation rate of the bacterium was enhanced by the addition of other organic materials such as YE, peptone and glucose. YE was a particularly effective additive in stimulating cell growth as well as PAH degradation. When 1 g-YE/L was supplemented into the basal salt medium (BSM) with 215 mg-Phe/L, the specific growth rate (0.28 h-1) and Phe-degrading rate (29.30 μmol/L/h) were enhanced approximately ten and two times more than those obtained in the BSM with 215 mg-Phe/L, respectively. Through kinetic analysis, the maximum specific growth rate (μmax) and PAH degrading rate (Vmax) for Phe were obtained as 0.34/h and 289 ${\mu}mol$/L/h, respectively. Also, μmax and Vmax for Pyr were 0.27 h-1 and 50 ${\mu}mol$/L/h, respectively. The degradation rates for each Phe (2.20 μmol/L/h) and Pyr (2.18 μmol/L/h) were lower in mixture substrates than in a single substrate (29.30 ${\mu}mol$/L/h and 9.58 ${\mu}mol$/L/h, respectively). Burkholderia sp. D5 can degrade Phe and Pyr contained in soil, and the PAH degradation rates in soil were 20.03 ${\mu}mol$/L/h for Phe and 1.09 ${\mu}mol$/L/h for Pyr.

• Korean Journal of Food Science and Technology
• /
• v.39 no.2
• /
• pp.133-137
• /
• 2007

The 2,2-diphenyl picrylhydrazyl (DPPH) method, which can be used to predict the oxidative stability of edible oils, was previously reported by our research group. Not only free radical scavenging antioxidants but also radicals from oxidized oils are capable of reacting with DPPH radicals, thereby reducing the absorbance of DPPH. In this study, the optimum sample size of edible oils for the DPPH method was determined, and the oxidation of the edible oils was monitored via DPPH, coupled with other conventional methods. The optimum sample size was determined as 1.5 g using soybean oil. Soybean, corn, virgin olive, and refined olive oils were thermally oxidized for 3 hr at $180^{\circ}C$ and analyzed via DPPH, conjugated dienoic acid (CDA) value, and p-anisidine value (p-AV) protocols. Soybean and corn oils were found to be more sensitive to thermal oxidation than virgin and refined olive oils, on the basis of the CDA value and p-AV measurements. The DPPH method can indicate the inherent radical scavenging activity of unoxidized samples, the time required for the depletion of antioxidants, and the rate of degradation of the antioxidants. The soybean and corn oils evidenced higher levels of free radical scavenging compounds, required more time for the consumption of inherent antioxidants, and also manifested steeper antioxidant degradation rates than olive oils, based on the results of DPPH analysis. The DPPH method, accompanied by other conventional methods, may prove useful in predicting the degree of oxidation of vegetable oils.

• Journal of Conservation Science
• /
• v.36 no.3
• /
• pp.187-196
• /
• 2020

In this study, we tried to reproduce some of the cosmetics from the Joseon period based on the previous analysis of the cosmetics excavated from the tomb of Princess Hwahyup. The two cosmetic powders, the white powder consisting of lead(II) carbonate and talc and the cinnabar-based red powder, were reproduced according to the records from the 6th to the 19th centuries. We also studied the degradation profiles of these reproduced samples by comparison of XRD patterns. Basic lead carbonate of the reproduced white powder turned into lead(II) carbonate, while the reproduced red powder showed different crystalline structure from the excavated cosmetics even after the degradation. Results of the evaluation tests showed that these reproduced cosmetics fell short of the standards set for the modern-day cosmetics, but based on their mixing ratio, the spreadability and oil absorption capacity of some samples of the reproduced white powder were found to be similar to those of the modern cosmetics.

• Journal of Korean Society of Forest Science
• /
• v.95 no.1
• /
• pp.60-72
• /
• 2006

The aim of this paper is to identify and evaluate relations for forest greening and the firewood substitution for home use after 1945 Liberation of Korea. Korea faced serious forest degradation by the early 1960s due to the enormous firewood consumption, which was about ten million cubic meters annually, for home use. If the trend of firewood consumption was maintained until 1955's, the total forest area in Korea could be thoroughly degraded within 10 years. The firewood substitution for home use had to be solved as soon as possible. For this purpose, energy sector by the Ministry of Commerce and Industry carried out the substitution policy for home using the briquettes which was the only natural resources for energy produced in Korea. Firewood was prohibited being carried in the major cities by forestry sector, the Ministry of Agriculture and Forestry, from 1958. Only 5.2% of household in the cities used the forest products consumed as a fuel in 1970 because these inter-sectoral substitution measures of firewood for home use turned out a success gradually. After the 1970s, firewood consumption for home use was naturally decreased due to rural people's explosive move to cities, who were major consumers of firewood for home use at that time. Firewood for cooking was substituted by LPG gas after 1985 and firewood for house heating was substituted by coal and oil after 1980. Finally, on the basis of the firewood substitution for home use, the forest degradation that lasted over one hundred years was put a period.

• Microbiology and Biotechnology Letters
• /
• v.34 no.3
• /
• pp.185-195
• /
• 2006

Phytoremediation is an economical and environmentally friendly bioremediation technique using plants which can increase the microbial population in soil. Unlike other pollutants such as heavy metals, poly-chlorinated biphenyl, trichloroethylene, perchloroethylene and so on, petroleum hydrocarbons are relatively easily degradable by soil microbes. For successful phytoremediation of soil contaminated with petroleum hydrocarbons, it is important to select plants with high removal efficiency through microbial degradation. In this study, we clarified the roles of plants and rhizobacteria and identified their species effective on phytore-mediation by reviewing the papers previously reported. Plants and rhizobacteria can degrade and remove the petroleum hydrocarbons directly and indirectly by stimulating each other's degradation activity. The preferred plant species are alfalfa, ryegrass, tall fescue, poplar, corn, etc. The microorganisms with a potential to degrade hydrocarbons mostly belong to Pseudomonas spp., Bacillus spp., and Alcaligenes spp. It has been reported that the elimination efficiency of hydrocarbons by soil microorganisms can be improved when plants were simultaneously applied. For more efficient restoration, it's necessary to understand the plant-rhizobacteria interaction and to select the suitable plant and microorganism species.

• Journal of Life Science
• /
• v.23 no.10
• /
• pp.1273-1279
• /
• 2013

Aromatic hydrocarbons, such as phenol, have been detected frequently in wastewater, soil, and groundwater because of the extensive use of oil products. Bacterial strains (56 isolates) that degraded phenol were isolated from soil and industrial wastewater contaminated with hydrocarbons. GN13, which showed the best cell growth and phenol degradation, was selected for further analysis. The GN13 isolate was identified as Neisseria sp. based on the results of morphological, physiological, and biochemical taxonomic analyses and designated as Neisseria sp. GN13. The optimum temperature and pH for phenol removal of Neisseria sp. GN13 was $32^{\circ}C$ and 7.0, respectively. The highest cell growth occurred after cultivation for 30 hours in a jar fermentor using optimized medium containing 1,000 mg/l of phenol as the sole carbon source. Phenol was not detected after 27 hours of cultivation. Based on the analysis of catechol dioxygenase, it seemed that catechol was degraded through the meta- and ortho-cleavage pathway. Analysis of the biodegradation of phenol by Neisseria sp. GN13 in artificial wastewater containing phenol showed that the removal rate of phenol was 97% during incubation of 30 hours. The removal rate of total organic carbon (TOC) by Neisseria sp. GN13 and activated sludge was 83% and 78%, respectively. The COD removal rate by Neisseria sp. GN13 from petrochemical wastewater was about 1.3 times higher than that of a control containing only activated sludge.

• Tribology and Lubricants
• /
• v.39 no.2
• /
• pp.49-55
• /
• 2023

Currently, the demand for green technologies toward a sustainable future is rapidly increasing due to growing concern over environmental issues. Methanol is biodegradable and can provide clean combustion to reduce sulfur oxide and nitrogen oxide emissions, and therefore it is a candidate fuel for marine engines. However, the effect of methanol on tribological characteristic degradation should be addressed for methanol-fueled engines. In this study, the methanol addition effects on tribological characteristic degradation is experimentally assessed using a pin-on-disk tribo-tester. Ni-based alloy is used as a target material due to its broad applicability as an engine component material. For a lubricant, engine oil with and without methanol are used. The tests are conducted for up to 10,000 cycles under boundary lubrication while the change in friction force is monitored. Additionally, the wear rate is determined based on laser scanning confocal microscope data. An additional test in which methanol is added at regular intervals is performed with an aim to directly observe its effect on friction. Overall, the friction coefficient increases slightly with increasing methanol concentration. Furthermore, the wear rate of the pin and disk increase significantly with methanol addition. The results also indicate that the friction increases instantaneously with methanol addition at the contacting interface. These findings may be useful for better understanding the methanol effect on the tribological characteristics of Ni-based alloys for methanol-fueled engines with improved performance.

• Journal of Life Science
• /
• v.19 no.5
• /
• pp.659-663
• /
• 2009

Bacterial stain 3Y was isolated from a site that was contaminated with diesel for more than 15 years. The strain could grow on various petroleum using hydrocarbons as the sole carbon source. The strain grew not only on aliphatic hydrocarbons but also on aromatic hydrocarbons. 3Y grew on aliphatic petroleum hydrocarbons hexane or hexadecane, and aromatic petroleum hydrocarbons BTEX, phenol, biphenyl, or phenanthrene. The strain showed aromatic ring dioxygenase and meta-cleavage dioxygenase activities as determined by tests using indole and catechol. Aromatic ring dioxygenase is involved in the initial step of biodegradation of aromatic hydrocarbons while meta-cleavage dioxygenase catalyzes the cleavage of the benzene ring. Based on a nucleotide sequence analysis of its 16S rRNA gene, 3Y belongs to the genus Sphingomonas. A phylogenetic tress was constructed based on the nucleotide sequences of closest relatives of 3Y and petroleum hydrocarbon degrading sphingomonads. 3Y was in a cluster that was different from the cluster that contained well-known sphingomonads. The results of this study suggest that 3Y has the potential to cleanup oil-contaminated sites. Further investigation is warranted to optimize conditions to degrade petroleum hydrocarbons by the strain to develop a better bioremediation strategy.