• Korean Journal of Food Science and Technology
• /
• v.35 no.3
• /
• pp.373-378
• /
• 2003

This research was conducted to investigate the possibilities of usage of rose (Rosa hybrida L. cv. Mary Devor) by examining th antioxidative and antimicrobial activities of extracts with various levels of ethanol concentrates. Proximate composition, dietary fiber, and flavonoids contents were analyzed, and total antioxidant status and yield ratios of extraction of rose were measured. The rose extracts were extracted in different level of ethanol concentrates (0, 75, 85, 95%), and peroxide value, acid value, and TBA value were investigated in different level of concentrates of extracts added and time duration of storage. The results were as follows; derivation period from measuring peroxide value showed that the rose (Petal & Calyces) extract-added group showed longer derivation period than the control group, tocopherol-added, or BHT-added groups, and it proved to be a highly effective antioxidant as a result. It showed the longest derivation period especially when 85% ethanol extract was added with concentration of 0.05%. For the acid values and TBA values of the extract added oil, the rose extract-added group and BHT-added group showed lower values than the control group and tocopherol-added group as th length of time for storage becomes longer. In fact, the rose extracts suggested the possibility to be used as a natural antioxidants as it showed high antioxidative effect similar to BHT. Overall, the rose extracts from each solvent showed high antimicrobial effects against Escherichia coli, Salmonella typhimurium, Staphylococcus aureus than control group. Especially, 85% ethanol extract showed significantly high antimicrobial effect against Escherichia coli.

• Nuclear Engineering and Technology
• /
• v.5 no.1
• /
• pp.55-64
• /
• 1973

The effect of compression in the strain ageing of Ferrovac E iron has been examined with compressive testing following the prestrain in compression. Both prestraining and testing were preformed at room temperature with the strain rate of 1.9$\times$10$^{-4}$ se $c^{-1}$ and that of 0.95$\times$10$^{-4}$ se $c^{-1}$ , respectively. Ageing was carried out at several temperatures below 8$0^{\circ}C$ using thermostatically controlled oil baths with a temperature control within$\pm$1$^{\circ}C$. It was found that the rate of strain ageing obeyed the $t^{2}$3/ law up to about five hours ageing at 6$0^{\circ}C$. The rate was slower than theses reported in case of the tensile prestrained iron. Activation energy for strain ageing has been estimated as 21.5 Kcal/mole at tile first stage of the aging process. At the second stage of ageing where the $t^{2}$3/ law is still valid, however, the activation energy was somewhat decreased. The activation energy at the first stage of ageing was about 10% larger than published results on the tensile-prestraining. This difference between the activation energies is explained in terms of the residual stress field in lattice.

• Journal of the Society of Naval Architects of Korea
• /
• v.28 no.1
• /
• pp.150-168
• /
• 1991

A practical procedure for the ultimate compressive strength-based safety and reliability assessment of the double skin upper deck structure is described. The external compressive stress acting on the upper deck structure which is due to the still water and wave-induced sagging moment is approximately estimated by using the existing rule of classification society. The ultimate compressive stress of double skin structure under the action of sagging moment is analyzed by using idealized structural unit method. Here an idealized plate element subjected to uniaxial load is formulated by idealizing the nonlinear behaviour of the actual element taking account of the initial imperfections in the form of initial deflection and welding residual stress. The interaction effect between the local and global failure in the structure is also taken into consideration. The accuracy of the present method is verified comparing with the present solution and the existing numerical and experimental results for unit member and welded box columns. The safety of the structure is evaluated using the concept of conventional central safety factor and the reliability assessment is made by using Cornel's MVFOSM method. The present procedure is then applied to upper deck structure of double skin product oil carrier. The influence of the initial imperfections and the yield stress of the material on the safety and reliability of the structure is investigated.

• Korean Journal of Plant Resources
• /
• v.17 no.2
• /
• pp.213-218
• /
• 2004

This study was conducted to examine the variations in 42 local perilla collected in Kangwon province of Korea and to provide basic informations which can be utilize in perilla breeding programs. The results obtained were summarized as the follows. Maturing period was widely distributed from 109 to 140 days. The maturing periods of most collections were 116 to 130 days(95.2％). and that 4.8％ of collections shown maturing period of below 115 days and above 131 days. Three varieties 109 day of maturing period were selected among local perilla collected from Yanggu gun. Stem length was ranged from 80 to 140 cm. The stem length of 111 to 130 cm, below 111 cm, and above 131 cm were 54.8％, 38.6％, and 16.7％, respectively. The number of cluster per plant was distributed 23 to 120. The distribution of cluster numbers were 40 to 70, under 40, and above 100 was 57.2％, 16.7％, and 11.9％, respectively. The number of seed capsules was distributed 20 to 40 and the collections ranged from at of 30 to 35 was 38.1 ％. Seed cluster length was distributed from 5.1 to 9.0 cm and that ranged from 6.1 to 8.0 cm was 64.3％, 1,000 grain weight ranged from 1.7 to 3.8 g. The distribution of 1,000 grain weight is 2.4 to 2.6 g, 3.0 to 3.2 g, and below 2.9 g was 35.7％, 19.1％, respectively. The 1,000 grain most weight 3.8 g was selected among local perilla collected in Hwacheon gun.

• Clean Technology
• /
• v.11 no.4
• /
• pp.195-204
• /
• 2005

A new condensation process for manufacturing N-acyl taurates which generates less pollutant and produces more than 60 % yield in comparison with the conventional process has been developed in this work. Its optimum process conditions are at $210{\sim}230^{\circ}C$ of reaction temperature and 6 ~ 9 hour of reaction time when Parasol 123 of petroleum refired oil is employed as process solvent and mixed catalysts of sulfonic acid and phosphoric acid are utilized as process catalyst. And the qualities of N-acyl taurates produced by this new process are similar to or better than those of imported product judging from their acid value, amine value and color. Thus, it can be said that the newly developed process for manufacturing N-acyl taurates in this work is better than the conventional process. The physical properties of N-acyl taurates produced in this work such as surface tension, foaming power, foaming stability, hard water stability, and emulsifying power etc. were compared with those of commercially available anionic surfactants. And the experimental results show that N-acyl taurates shows good physical properties and that they can be alternative to conventional anionic surfactants.

• Journal of the Korean Applied Science and Technology
• /
• v.33 no.1
• /
• pp.51-57
• /
• 2016

In this study, we synthesized reactive surfactant which have functional radical group for effective chemical reaction. Reactive surfactant have been synthesized using synthesis of polyoxyethylene lauryl ether(POE 23) which is nonionic surfactant and methacrylic acid, acrylic acid. benzene was used as the solvent, p-TsOH was used as the catalyst. synthesized surfactant was confirmed by FT-IR, $^1H$-NMR spectra, and elemental analysis. Evaluation of physical properties was measured HLB, cloud point, surface tension, the critical micelle concentration, emulsifying power. HLB number was evaluated 11.62 to 12.09 range. The Critical Micelle Concentration(cmc) values evaluated was $1{\times}10^{-4}{\sim}5{\times}10^{-4}mol/L$ by surface tension method. The cloud point was $35^{\circ}C$, $39^{\circ}C$ each. The emulsifymvcqa ing properties of the synthesized surfactants was lower than polyoxyethylene lauryl ether. In addition, soybean oil was better than benzene. The experimental results confirmed the ester bond, the yield of 93.27%, 94.49% was found.

• Korean Journal of Plant Resources
• /
• v.25 no.1
• /
• pp.24-30
• /
• 2012

Naehanyuchae and Youngsanyuchae were originated from the cross between "Erra(female)" and "Tower(male)". The cultivars were made at Bioenergy Crop Research Center, National Institute of crop science, Rural Development Administration, Korea in order to develop the high cold tolerant and yielding rapeseed variety with non-erucic acid and non-glucosinolate as good seed quality indicator. The superiorities of these varieties have been shown through the regional performance trials and demonstration farmers fields. Naehanyuchae and Youngsanyuchae had good agronomic characteristics related to yield potential such as many valuable branches and pods, and long pod length. The seeds of these new varieties composed of the 80% of oleic acid and linoleic acid without erucic acid, and glucosinolate was not extracted in the oil cake. The average grain yields increased by the from 16% to 22% according to the regional performance trials compared to check variety.

• Korean Journal of Food Science and Technology
• /
• v.36 no.2
• /
• pp.276-282
• /
• 2004

Barley flakes were developed by extrusion cooking using broken kernels, by-products of the barley pearling process. Broken kernels from both non-waxy and waxy barley broken kernels were sufficiently gelatinized at the barrel temperature of over $100^{\circ}C$ and the moisture content of broken kernels of over 35%. Cutting and flaking roll separating properties of pellets prepared from non-waxy barley broken kernels were better than those of waxy barley broken kernels. Characteristics of pellets prepared by extrusion cooking in different mixing ratios of non-waxy and waxy barley broken kernels were investigated. As the mixing ratio of waxy barley broken kernels increased, RVA peak viscosity, apparent viscosity, and yield stress of prepared pellets decreased, while flow behavior index increased. As the mixing ratio of waxy barley broken kernels increased, compressive strength and bulk density of deep-fat fried flakes drastically decreased, and the size of air cells on cross-section increased, and thickness of cell-constituting bodies decreased. Sensory evaluation results showed that acceptability for texture and taste of flakes inclosed as the mixing ratio of waxy barley broken kernels increased, and optimum mixing level of waxy barley broken kernels appeared to be 30-40%.

• The Korean Journal of Pesticide Science
• /
• v.5 no.2
• /
• pp.62-66
• /
• 2001

The thirteen commercial insecticides to Lycoriella mali were investigated on their insecticidal activities and mycelial growth of two Letinula edodes strains. For the adults, insecticides showing over 95% insecticidal activity were chlorpyrifos-methyl, fenthion, fenitrothion, benfuracarb, furathiocarb and deltamethrin. For tile larvae, diflubenzuron and cyromazine showed over 90% insecticidal activity. Fenthion, benfuracarb, furathiocarb, deltamethrin, diflubenzuron and cyromazine did not affect the mycelial growth of L. edodes strain, in Imhyup 1 variety. And deltamethrin, diflubenzuron and cyromazine did not affect that in Sanlim-5. Insecticides showing over 80% residual effect for 14 days were benfuracarb to the adults and diflubenzuron and cyromazine to the larvae. Control effect of furathiocarb, fenthion, benfuracarb, deltamethrin, diflubenzuron and cyromazine against larvae of Lycoriella mali showed 90% ten days after application under sawdust cultivation. Among them, benfuracarb, fenthion and furathiocarb revealed excellent control effect against adults. These results indicate that benfuracarb, fenthion, and furathiocarb can be used for the control of Lycoriella mali in the field. However, further studies are needed on the effect of insecticides treatment oil fruit-body yield and chemical residue in the mushroom tissues.

• Journal of the Korean Society of Groundwater Environment
• /
• v.6 no.3
• /
• pp.152-157
• /
• 1999

Oil leaked from underwound storage tanks and leachate from sanitary landfills have been known as contaminant sources of the high-quality groundwater resources. The mobility of contaminants in the aquifer largely depends on the groundwater flow and the determination of associated hydraulic parameters is essential for a proper remediation of contaminated grnundwater. This study aimed at determining an optimum set of hydraulic parameters for an unconfined sandy aquifer of a laboratory scale through comparison of various methods. Results showed that the specific yield obtained from gravity drainage experiment was an average of 0.20 with minor variations in aquifer depths. and the permeabilities obtained from Dupuit approximation and slug test gave similar values of 5.33 cm/min and 5.85 cm/min but the constant head method gave 0.17 cm/min, which is much ion than the other methods. This experimental evidence reveals that the permeability of the unconfined sandy aquifer could be accurately determined by Dupuit assumption or slug tut rather than by constant head method conducted for a disturbed separate soil column.