• KOREAN JOURNAL OF CROP SCIENCE
• /
• v.61 no.1
• /
• pp.64-69
• /
• 2016

This study was conducted to develop a fast and efficient screening method to determine the quantity of fatty acid in peanut oil for high oleate breeding program. A total of 329 peanut samples were used in this study, 227 of which were considered in the calibration equation development and 102 were utilized for validation, using near infrared reflectance spectroscopy (NIRS). The NIRS equations for all the seven fatty acids had low standard error of calibration (SEC) values, while high R2 values of 0.983 and 0.991 were obtained for oleic and linoleic acids, respectively in the calibration equation. Furthermore, the predicted means of the two main fatty acids in the calibration equation were very similar to the means based on gas chromatography (GC) analysis, ranging from 36.7 to 77.1% for oleic acid and 7.1 to 42.7% for linoleic acid. Based on the standard error of prediction (SEP), bias values, and $R^2$ statistics, the NIRS fatty acid equations were accurately predicted the concentrations of oleic and linoleic acids of the validation sample set. These results suggest that NIRS equations of oleic and linoleic acid can be used as a rapid mass screening method for fatty acid content analysis in peanut breeding program.

• Food Science of Animal Resources
• /
• v.21 no.3
• /
• pp.215-226
• /
• 2001

The CLA used to add in diet was chemically synthesized by alkaline isomerization method with corn oil. To investigated the effects of conjugated linoleic acid(CLA) added diet feeding on CLA accumulation and blood characteristics of pork, a total of 64 Landrace was fed both CLA-free and CLA-added(0.3, 0.6 and 0.9%) diet for 1∼4 weeks. Cholesterol compositions in blood and CLA contents and fatty acid compositions of loin, belly, bone and skin were determined at 1, 2, 3 and 4 weeks after CLA added at fed. The HDL content in blood of all treatments was higher(P<0.05) than that of control and that of treatment 3 was higher(P<0.05) than that of other treatments among the CLA feeding periods. Palmitic, stearic and linolenic acids composition of loin and belly was increased but oleic, linoleic and arachidonic acids composition of them was decreased according to increasing the CLA feeding periods. CLA contents of loin and belly were higher than that of control and increased according to increasing the quantity of CLA and CLA feeding periods. CLA contents of bone and skin were higher than that of control, too. CLA content of skin was higher than that of bone. It was suggested that CLA could be accumulated in loin, belly, bone and skin by dietary CLA supplementation, and the CLA concentration and fatty acid composition in muscle could be affected by CLA level in diet and feeding period.

• Journal of the Korea Society for Simulation
• /
• v.23 no.2
• /
• pp.17-24
• /
• 2014

This study attempts to show an example of developing and applying thermal hydraulic simulation model for Aircraft-EHA. The overview of research procedure is as in the following. First, The unit hydraulic simulation model, which reflects physical quantity answering engineer's purpose is developed. Second, The unit hydraulic simulation model is combined, and then branched out to EHA hydraulic model. Third, a simulation model including flow thermal is developed, and then oil temperature rise time according to 'initial temperature and load' is examined. Finally, the master graph that can be used for designing EHA combined with thermal hydraulic analysis results in several cases is compiled, and suggested. AMESim, commercial software, is used through whole procedure.

• Journal of the Society of Cosmetic Scientists of Korea
• /
• v.29 no.2 s.43
• /
• pp.181-191
• /
• 2003

This study described about method that form liquid crystal gel (LCG) by main ingredient with hydrogenated lechin (HL) in OW emulsion system. Result of stability test is as following with most suitable LCG's composition. Composition of LCG is as following. To form liquid crystal, an emulsifier used $4.0\;wt\%$ of cetostearyl alcohol (CA) by $4.0\;wt\%$ of HL as a booster, Moisturizers contained $2\;wt\%$ of glycerin and $3.0\;wt\%$ of 1.3-butylene glycol (1,3-BG). Suitable emollients used $3.0\;wt\%$ of cyclomethicone, $3.0\;wt\%$ of isononyl isononanoate (ININ), $3.0\;wt\%$ of cerpric/carprylic triglycerides (CCTG), $3.0\;wt\%$ of macademia nut oil (MNO) in liquid crystal gel formation. On optimum conditions of LCG formation, the pHs were formed all well under acidity or alkalinity conditions. Considering safety of skin, PH was the most suitable $\pm61.0$ ranges. The stable hardness of LCG formation appeared best in $32\;dyne/cm^2.$ Particle of LCG is forming size of $1{\~}20\;{\mu}m$ um range, and confirmed that the most excellent LCG is formed in $1{\~}6\;{\mu}m$ range. According to result that observe shape of LCG with optical or polarization microscope, LCG could was formed, and confirmed that is forming multi-layer lamellar type structure around the LCG. Moisturizing effect measured clinical test about 20 volunteers. As a result, moisturizing effect of LCG compares to placebo cream was increased $30.6\%$. This could predicted that polyol group is appeared the actual state because is adsorbed much to round liquid crystal droplets to multi-lamellar layer's hydrophilic group. It could predicted that polyol group is vast quantity present phase that appear mixed because is adsorbed to round liquid crystal to multi-lamellar layer's hydrophilic group. This LCG formation theory may contribute greatly in cosmetics and pharmacy industry development.

• Proceedings of the Korean Institute of Navigation and Port Research Conference
• /
• 2005.10a
• /
• pp.175-179
• /
• 2005

Treatment of Emulsion is very important to development of Bilge Separator for new IMO Regulation. It is too difficult to demulsify the emulsion in the bilge waste water, so we use chemical treatment to break emulsion stability. Broken oil particle is treated by flotation. Bilge Separator on the Ship doesn't have enough time to treat Bilge waste water because of small space in the ship. For the solution to this problem, we experiment to find primary factor as coagulator, pH, and amount of coagulator. As the basis of test, we decided coagulator, pH and quantity of coagulator.

• Resources Recycling
• /
• v.9 no.3
• /
• pp.13-21
• /
• 2000

This study describes to analyze the heat transfer characteristics of waste solvent recovery system using a double pipe heat exchanger heating solvent by the hot oil. The solvent recovery system consists of the feeding pump, the double pipe heat exchanger, the vacuum spray chamber, and the condenser. A double pipe heat exchanger consists of the first section to conduct the heating of solvent to the thermal saturated point and the second section to evaporate the saturated solvent. The heat transfer area for vaporization of water, benzene and alkylbenzene was predicted by the heat balance modelling and experimentally measured from the temperature distribution as a function of solvent flow rate and heating temperature. The required heat transfer area for vaporization was increased with increasing solvent flow rates and with decreasing heating temperatures due to decreased quantity of transferred heat per the unit area. Theoretical modelling of the heat transfer area for solvents vaporization in the pipe showed good agreement with experimental results. Results showed to be suitable for the waste solvent recovery using a double pipe heat exchanger.

• Transactions on Electrical and Electronic Materials
• /
• v.11 no.1
• /
• pp.42-47
• /
• 2010

Polymer insulating materials such as cross linked polyethylene (XLPE) are employed in electric cables used for extra high voltage. These materials can degrade due to chemical, mechanical and electric stress, possibly caused by voids, the presence of extrinsic materials and protrusions. Therefore, this study measured discharge patterns, discharge phase angle, quantity and occurrence frequency as well as changes in XLPE under different temperatures and applied voltages. To quantitatively analyze the irregular partial discharge patterns measured, the discharge patterns were examined using a statistical program. A three layer sample was fabricated, wherein the upper and lower layers were composed of non-void XLPE, while the middle layer was composed of an air void and copper particles. After heating to room temperature and $50^{\circ}C$ and $80^{\circ}C$ in silicone oil, partial discharge characteristics were studied by increasing the voltage from the inception voltage to the breakdown voltage. Partial discharge statistical analysis showed that when the K-means clustering was carried out at 9 kV to determine the void discharge characteristics, the amount discharged at low temperatures was small but when the temperature was increased to $80^{\circ}C$, the discharge amount increased to be 5.7 times more than that at room temperature because electric charge injection became easier. An analysis of the kurtosis and the skewness confirmed that positive and negative polarity had counterclockwise and clockwise clustering distribution, respectively. When 5 kV was applied to copper particles, the K-means was conducted as the temperature changed from $50^{\circ}C$ to $80^{\circ}C$. The amount of charge at a positive polarity increased 20.3% and the amount of charge at a negative polarity increased 54.9%. The clustering distribution of a positive polarity and negative polarity showed a straight line in the kurtosis and skewness analyses.

• Korean Journal of Medicinal Crop Science
• /
• v.20 no.6
• /
• pp.415-420
• /
• 2012

In order to evaluate the effect of seed weight on different aspect of safflower (Carthamus tinctorius L.) seed germination and growth characteristics. Quantity of sinapine leaked from seed was greater as the viability of seeds was dropped by the time elapsed of seed aging model and long storage condition in safflower (Carthamus tinctorius L.). The cultivar of safflower was Jin-Sun and the seeds that are separated to three different weights of small, middle, and large were used in this experiment. Large seeds revealed the highest germination percent, coleoptiles fresh weight, coleoptiles dry weight, radicle fresh weight and 1000 seed weights than other seed weight. Seed weight had little effect on yield while seed number exerted a positive influence. Interestingly, yield per plant and its major components, number of capsules and capsule weights, revealed a negligible relationship with oil content.

• Korean Journal of Community Nutrition
• /
• v.4 no.1
• /
• pp.46-56
• /
• 1999

A deep understanding of the dietary patterns and nutrient intake is important for assessment of possilbe nutritional risk and for establishing nutrition improvement strategies. This study was conducted toexamine the dietary characteristics of a nutritionally poor elderly group compared to the middle-and highly-nourished group. Elderly participant was recruited from local elderly centers in Suwon city in 1998. Trained dietitians interviewed 119 elderly(35 males, 84 females) aged 60 years and over for collecting dietary data(24-hour recall) and related variables. Male and female subjects were grouped into high, middle, and low according to the mean nutrient adequancy ratio(MAR) tertiles. An analysisof the percentage of RDA(Recommended Daily Allowances of Korea) for each of the 10 nutrients showed that the male low-MAR group consumed below the RDA in all kinds of nutrients, and the female low-MAR group consumed nutrients below the RDA except vitamin C. An evaluation of nutrient density by Index of Nutritonal Quality(INQ) also showed a similar tendency. Thus, the INQ level of the male low-MAR group was significantly lower than the middle-or high-MAR group, especially in protein, vitamin A, thiamin, riboflavin, and phosphorus(p<0.05). Moreover, INQ level of female low-MAR group was significantly lower than that of the high group(p<0.05) in all nutrients. The female low-MAR group's daily food intake were also lower than those of the high-MARgroup in gains, fish, fruits, oil and beverages. The energy distribution from carbohydrates, fats and proteins showed that the male low-MAR group had significantly higher carbohydrate and lower fat proportions compared to each gender high-MAR group, respectively. The male and female low-MAR group had low scores about eating all side dishes. These findings indicate that a moderate increase of the meat/egg/fishes intake was needed by the male low-MAR group for improving nutrition adequacy, and an overall increase of the food quantity and quality was desired for the female low-MAR group. These data could be used for planning a community elderly nutrition program and establishing strategies for tailored guidelines for the individuals.

• Journal of Digital Convergence
• /
• v.17 no.10
• /
• pp.103-113
• /
• 2019

The purpose of this study is to recognize the importance of sustaining the coal industry in spite of the declaration of new climate change regime. Due to the importance to have the ability to control the supply and demand for energy source, this study will present the ground supporting the need to save some fixed amount of coal to carry out this task. The relative quantity of fossil fuel like coal and oil consumed as an energy source is reduced due to the increasing portion of renewable energy sources. Nevertheless, we can verify the fact that the position as a main energy source in demand for and supply of electric power is still valid. And the optimal amount of coal storage is estimated through the average annual amount of demand derived from preceding studies. In this context, it is very urgent problem to maintain the coal industry as a industrial policy for the sustainable national economic growth through the coal storage policy and to determine the optimal amount of annual storage.