• 한국항해항만학회지
• /
• 제46권4호
• /
• pp.385-391
• /
• 2022

본 연구에서는 수요 및 공급요인 외 해상운임에 영향을 주는 다양한 변수들을 발굴하고자 다변량 시계열분석을 수행해 보았다. 우선 종속변수에는 해상운임을 대용할 변수로 Shipping Intelligence에서 제공하고 있는 종합운임지수(ClarkSea Index), 벌크선운임(Clarksons Average Bulker Earnings), 탱커선운임(Clarksons Average Tanker Earnings) 등을 활용하였다. 선행연구를 통해 해상운임에 영향을 미칠 것으로 예상되는 세계 해상물동량(World Seaborne Trade), 세계 선복량(World Fleet), 유가(Brent Crude Oil Price), 세계 GDP성장률(GDP World), OECD 산업생산성장률(Industrial Production OECD), 금리(US$ LIBOR 6 Months), OECD 인플레이션(CPI OECD) 등을 독립변수로 설정하여 회귀분석을 수행해 보았다. 데이터는 시계열자료로 1992년부터 2020년까지의 연데이터로 구성하였다. 분석결과 종합운임지수에는 해상물동량과 유가가, 벌크선운임에는 해상물동량만이, 탱커선운임에는 해상물동량, 유가, 산업생산성장률, 인플레이션 등이 통계적으로 유의미한 영향을 미치는 것으로 나타났다.

• Environmental Engineering Research
• /
• 제24권2호
• /
• pp.202-210
• /
• 2019

In order to maximize the utilization of sewage sludge, a waste from wastewater treatment facility, the residual sewage sludge generated after lipid and carbohydrate extraction for biodiesel and bioethanol production was used to produce bio-oil by pyrolysis. Thermogravimetric analysis showed that sludge pyrolysis mainly occurred between 200 and $550^{\circ}C$ (with peaks formed around 337.0 and $379.3^{\circ}C$) with the decomposition of the main components (carbohydrate, lipid, and protein). Bio-oil was produced using a micro-tubing reactor, and its yield (wt%, g-bio-oil/g-residual sewage sludge) increased with an increase in the reaction temperature and time. The maximum bio-oil yield of 33.3% was obtained after pyrolysis at $390^{\circ}C$ for 5 min, where the largest amount of energy was introduced into the reactor to break the bonds of organic compounds in the sludge. The main components of bio-oil were found to be trans-2-pentenoic acid and 2-methyl-2-pentenoic acid with the highest selectivity of 28.4% and 12.3%, respectively. The kinetic rate constants indicated that the predominant reaction pathway was sewage sludge to bio-oil ($0.1054min^{-1}$), and subsequently to gas ($0.0541min^{-1}$), rather than the direct conversion of sewage sludge to gas ($0.0318min^{-1}$).

• 환경위생공학
• /
• 제23권4호
• /
• pp.23-29
• /
• 2008

This study was performed to develop mutant strain using a combination of UV irradiation procedures with protoplast mutagenesis in order to achieve an effective kasugamycin production from Streptomyceskasugaensis. Whenlessthan 1.0g/lof Linoleic acid was used, the cell growth was not inhibited. On the other hand, the cell growth was greatly inhibited when more than 1.6 g/l of linoleic acid was used. Among the various mutant strains, SK-12 was obtained in medium containing 1.6g/l of linoleic acid, showing the highest rate of both cell growth and kasugamycin production. In order to compare kasugamycin production with the SK-12 and the parent strain using soybean oil, cultures were performed in a flask. The production of kasugamycin was increased with the increase time. The maximum kasugamycin concentration was 1.2g/l after 6 days of culture. The product yield from soybean oil was 0.05g/l/g consumed carbon source, which was roughly 5.0 fold higher than the parent strain. These results show that it was effective method for obtaining a mutant resistant to linoleic acid for the effective production of kasugamycin from soybean oil.

• 청정기술
• /
• 제24권4호
• /
• pp.365-370
• /
• 2018

Oil shale은 kerogen을 함유한 퇴적암으로 대표적인 비재래 에너지자원으로 알려져 있다. 열분해 공정을 통하여 oil shale이 분해되면 oil, gas 및 coke를 생성하게 된다. 본 연구에서는 oil shale의 청정 전환기술을 개발하기 위하여 oil shale의 TGA 및 연속 열분해 연구를 수행하였다. Oil shale의 열분해 전환율에 대한 반응 온도 및 체류시간의 영향을 살펴보고 oil의 생성율을 살펴보았다. Oil shale의 열분해 전환율은 온도와 체류시간에 따라 증가하였으며 $450{\sim}500^{\circ}C$, 체류시간 30 min의 조건에서 최대 oil 생산 수율을 나타내었다.

• 한국조리학회지
• /
• 제24권2호
• /
• pp.79-86
• /
• 2018

The purpose of current study was to evaluate the oxidative stability of soybean oil after frying according to storage temperature. The soybean oil after 10 times deep fat frying with potato sticks (10% w/w of oil) were stored during 10 days at 30, 60 and $90^{\circ}C$ and chemical properties were determined. The acid value and peroxide value were the highest and the iodine value were the lowest when the oil stored at $90^{\circ}C$. Expecially, the production rate of peroxide was fast at over $60^{\circ}C$. According to the results, frying oil should not be stored for more than 6 days at $30^{\circ}C$ after use. Since the oil used had already produced unstable peroxides, oxidation could proceed relatively quickly even at low temperatures. Therefore, it is desirable to keep the used oil at a temperature as low as possible.

• 한국자동차공학회논문집
• /
• 제19권4호
• /
• pp.91-98
• /
• 2011

Minimizing the cylinder wear and the consumption rate of cylinder oil in a large two-stroke diesel engine is of great economic importance. A motor-driven cylinder lubricator for Sulzer RT-flex large two-stroke diesel engines developed by authors is in need of mounting a quill system to lubricate cylinder parts for smoother operation. In order to apply the common-rail lubricating system to the developed cylinder lubricator as the second research stage, the quill system with a progressively quantitative distributor is improved in the electronically controlled quill system with an accumulating distributor. In this study, the effects of lubricator motor speed, plunger stroke and cylinder back pressure on oil feed rate, maximum discharge and delivery pressures are experimentally investigated by using the electronically controlled quill system with an accumulating distributor in the developed cylinder lubricator. It is found that the oil feed rate of the electronically controlled quill system with an accumulating distributor is larger than that of the quill system with a progressively quantitative distributor because of the increase of delivery speed and volume by changing the location of accumulator in the same experimental condition.

• Geomechanics and Engineering
• /
• 제38권2호
• /
• pp.107-123
• /
• 2024

The drilling angle of the well is an important factor that can affect the sand production process and make its destructive effects more severe or weaker. This study investigated the effect of different well angles on sand production for the Asmari Formation, located in one of the oil fields southwest of Iran. For this purpose, a finite difference model was developed for three types of vertical (90°), inclined (45°), and horizontal (0°) wells with casing and perforations in the direction of minimum and maximum horizontal stresses, then coupled with fluid flow. Here, finite element meshing was used, because the geometry of the model is so complex and the implementation of finite difference meshes is impossible or very difficult for such models. Using a combined FDM-FEM model with fluid flow, the sand production process in three different modes with different flow rates for the Asmari sandstone was investigated in this study. The results of numerical models show that the intensity of sand production is directly related to the in-situ stress state of the oil field and well drilling angle. Since the stress regime in the studied oil field is normal, the highest amount of produced sand was in inclined wells (especially wells drilled in the direction of minimum horizontal stress) and the lowest amount of sand production was related to vertical wellbore. Also, the Initiation time of sand production in inclined wells was much shorter than in other wellbores.

• 상하수도학회지
• /
• 제26권4호
• /
• pp.497-502
• /
• 2012

Anaerobic Digestion Process is evaluated as efficient wastewater treatment process with the removal of high concentrations of organic waste and production of biogas. This study was performed using hybrid anaerobic hybrid reactor (AHR) which consists of anaerobic sludge blanket (UASB) and biofilm-coated filter media was applied for Palm Oil Mill Effluent (POME) for 80 days to know optimum removal efficiency and production of biogas by comparing each part which divided changing Organic Loading Rate (OLR). As a result of this study, the removal efficiency was 90.4 % when the organic loading rate of influent was 15 kg COD/$m^3$/day. Since organic loading rate was up to 20 kg COD/$m^3$/day, the removal rate declined 80.7%. Over loading of influent caused sludge expansion and overproduction of microorganism. Amount of biogas was collected 82.3 L/day and pH was remained 6.9 constantly with balance of alkalinity.

• 한국자원식물학회지
• /
• 제27권3호
• /
• pp.229-235
• /
• 2014

Flax (Linum usitatissimum L.) has been used for the edible oil in Korea. The evaluate the effect of plant growth retardants on flaxseed yield, oil content, and gibberellin level, chloromequat chloride (CMC), paclobutrazol (PBZ), and prohexadione-Ca (PHC) were used as plant growth retardants in this study. These plant growth retardants were foliar-sprayed to flax plant at 55 days after seeding. The concentrations of each plant growth retardant were as followed: CMC 250, 500, 1000 ppm, PBZ 40, 80, 160 ppm and PHC 500, 1000, 2000 ppm. PHC treatment to forming bolls was more stimulated than CMC and PBZ. The highest ripened seed rate was observed in PHC treatment at 2000ppm. The high see yields were obtained in PHC treatment following PBZ and CMC, in turn. Seed yield that significantly increased in PBZ and PHC was found to be increased 12.4 ~ 23.9% as compared to the control. The PHC showed higher flaxseed production and oil yield than that of CMC and PBZ. The results obtained in the present study suggest that higher concentration of plant growth retardant (PHC) increased flaxseed yield and oil content. The optimal concentration of PHC treatment was observed in 2000 ppm. It concludes that the foliar application of PHC 2000 ppm may be useful for the increasing oil and higher seed production in flax plants.

• 한국미생물·생명공학회지
• /
• 제17권3호
• /
• pp.219-223
• /
• 1989

Hydrocortisone의 $\Delta$$^1$-Dehydrogenation에 의한 prednisolone의 생산에서 소포제인 silicone oil과 neolin 302의 영향이 조사되었다. 미생물 전환방법은 pseudo-crystallofermentation 기법에 의해 수행되었다. 스테로이드 입자들은 소포제와의 hydrophobic-hydrophobic interaction에 의해 서로 응집되었다. 이러한 응집 현상에 의해 고체 기질의 용해속도와 비례하는 물질전달 면적이 감소됨으로써, 결국 생물전환속도의 감소를 유발하게 된다. Neolin은 silicone oil에 비해 전환속도에 더욱 좋지 않은 영향을 끼쳤으며, 소포제 농도가 증가할수록 전환속도는 감소하였다.