• Journal of the Korean Institute of Electrical and Electronic Material Engineers
• /
• v.29 no.2
• /
• pp.114-119
• /
• 2016

This paper dealt with the propagation characteristics of acoustic signal in insulation oil for the purpose of improving the reliability of AE (acoustic emission) method used for condition monitoring of oil-immersed transformers. A discharge source was placed in insulation oil and AE sensors ($f_c$ :140 kHz) were attached on the oil tank to study the changes of velocity and propagation path with the depth and distance. The average velocity was 1,436 m/s and the velocity decreased with the increase of depth from the oil surface to 430 mm. The propagation paths were classified into three sections by the shortest reflection path of the detected signal. The minimum distinguishable distance in each section was 70 mm. It was also verified that PD (partial discharge) with a magnitude over than 500 pC can be detected by the AE sensors.

• Journal of Sensor Science and Technology
• /
• v.22 no.4
• /
• pp.239-243
• /
• 2013

Several methods are available to measure the oxidation of edible oils, such as their acid, peroxide, and anisidine values. However, these methods require large quantities of reagents and are time-consuming tasks. Therefore, a more convenient and time-saving way to measure the oxidation of edible oils is required. In this study, an edible oil-condition sensor was fabricated using single-walled nanotubes (SWNTs) made using the spray deposition method. SWNTs were dispersed in a dimethylformamide solution. The suspension was then sprayed using a spray gun onto a prefabricated Au/Ti electrode. To test the sensor, oxidized edible oils, each with a different acid value, were prepared. The SWNT sensors were immersed into these oxidized oils, and the resistance changes in the sensors were measured. We found that the conductivity of the sensors decreased as the oxidation level of the oil increased. In the case of the virgin oil, the resistance change ratio in the SWNT sensor S(%) = {[(Rf - Ri)]/Ri}(%) was more than 40% after immersion for 1 min. However, in the case of the oxidized oil, the resistance change ratio decreased to less than that of the response of the virgin oil. This result suggests that the change in the oil components induced by the oxidation process in edible oils is related to the conductivity change in the SWNT sensor.

• Geophysics and Geophysical Exploration
• /
• v.19 no.1
• /
• pp.37-44
• /
• 2016

$CO_2$-EOR (Carbon Dioxide-Enhanced Oil Recovery), one of the enhanced oil recovery methods, helps to not only enhance the production of oil, but also store carbon dioxide in underground. However, if micro fractures occur when during the injection of $CO_2$, it is difficult to make permanent storage of $CO_2$ in reservoir and can cause contamination of groundwater and soil. Therefore, in this study, we performed microseismic monitoring to investigate the occurrence of fractures during the $CO_2$ injection at the Meruap oil reservoir, Indonesia. To pick the first arrivals of microseismic events, Improved MER (Modified Energy Ratio) method was used. After picking the first arrivals, hodogram analysis was carried out by using the data recorded at three component geophones to calculate the back azimuth of events. Finally, locations of microseismic events were decided by using the results of first arrival picking and hodogram analysis. Estimated locations showed that all microseismic events were occurred at surface and any fracture did not occur around the reservoir. Moreover, by analyzing noise characteristic, we confirmed that almost of picked first arrivals were due to the repetitive mechanical noise.

• Journal of the Korean Association of Geographic Information Studies
• /
• v.15 no.1
• /
• pp.1-15
• /
• 2012

Marine scientific monitoring, including monitoring of oil pollution, marine ecosystems, and the marine environment in general, has been being carried out continuously in order to assess the impact of oil pollution since the Hebei Spirit oil spill in December 2007. GIS thematic maps containing visual and summarized information are very useful for conducting exploratory analyses on the spatio-temporal variability of the marine environment and marine ecosystems due to oil pollution. Defining map types and building a legend in accordance with data characteristics are essential elements for mapping. In the present study, map types were defined according to the data attributes and GIS data types for each data item and classification of data intervals for the legend was defined by using two data distribution types through a histogram analysis. The data interval method was defined as follows: If the histogram of data has a uniform distribution, an equal interval method is applied; in the case of a normal distribution, a standard deviation method is applied. In addition, thematic map templates were made for each map type through the definition of marginal elements. Through the establishment of systematic mapping methods and procedures in this study, it was possible to effectively make standardized thematic maps for various kinds of marine scientific data.

• Journal of Food Hygiene and Safety
• /
• v.26 no.3
• /
• pp.254-259
• /
• 2011

Growing evidence indicates that oxidized low density lipoprotein (LDL) may promote atherogenesis. Therefore, inhibition of LDL oxidation may impede this process. The inhibitory effected on the susceptibility of human LDL to $Cu^{2+}$ or macrophages induced oxidation was investigated by monitoring thiobarbituric acid reactive substances(TBARS). Organosulfur compounds of garlic oil contains diallyldisulfide, diallyltrisulfide, diallyltetrasulfide, and diallyl pentasulfide in order. Garlic oil inhibited LDL oxidation by $Cu^{2+}$, or macrophages in a dose dependently, with a 20~60 ${\mu}g$, as increased TBARS assay. Garlic oil, at 60 ${\mu}M$, almost completely inhibited macrophages induced increase in electrophoretic mobility of LDL. When compared with several other antioxidants, probucol showed highest ability, and then garlic oil showed a much higher ability than natural occurring antioxidants, ${\alpha}$-tocopherol and ascorbic acid. The results suggested that garlic oil might play the inhibitory effects in the process of LDL oxidation.

• The KSFM Journal of Fluid Machinery
• /
• v.19 no.3
• /
• pp.37-42
• /
• 2016

The demand for wireless technology in plant structure has recently been increasing due to several advantages such as installation cost reduction, easy placement, easy extension and aesthetic benefits. Among the many wireless technologies, ZigBee is one of the most useful for plant structure; a wireless plant networking system can be configured using ZigBee alone. This research proposes a ZigBee to use for extreme cold region and thereby enable integration of wired and wireless plant monitoring systems. In this study, in order to assess the performance of ZigBee measured data by thermocouple were examined based on the results from laboratory tests between existing ZigBee and developed ZigBee. From the experiment results, performance of developed ZigBee in harsh environment can be increased well.

• Transactions of the Korean Society of Automotive Engineers
• /
• v.25 no.1
• /
• pp.60-65
• /
• 2017

We designed and fabricated the engine oil monitoring sensor to measure engine oil deterioration through increased vehicle mileage. Since the condition of the engine oil can be affected by the state of the vehicle and its operating conditions, it should be directly measured and determined in every vehicle. The fabricated sensor has an aluminum parallel capacitor structure that measures capacitance related with the dielectric constant, which is one of the indices of oil deterioration. The size of the capacitor is small enough that it could be easily adapted on the oil level gauge without introducing any change in the design. The fabricated device is installed in the diesel engine to measure the change in capacitance accurately as the vehicle moved from 0 km (new engine oil state) to 11,364 km. The results showed the maximum value at around 5,000 km, and the values plateaued as mileage increased, corresponding with the measurement result of the TAN (Total Acid Number). Based on the results, the condition of the oil must be monitored regularly though oil change is recommended once the vehicle has traveled the distance of around 10,000 km.

• Proceedings of the KIEE Conference
• /
• 2004.07c
• /
• pp.1842-1844
• /
• 2004

In oil-filled equipment such as transformers, partial discharge or local overheating will make insulating material(oil, kraft paper, proclain and wood) be stressed and generate many sort of gases(CO, $CO_2,\;H_2,\;C_2H_4$) which are dissolved in transformer oil. The ratio of this gas can make diagnostic tecchniques of the lifetime of transfomer so, it is important to monitoring $H_2$ gas continuously. This paper developes a system of detecting about $H_2$ gas by using $H_2$ gas sensor, and we describe operation and performance of this system.

• Proceedings of the KIEE Conference
• /
• 1999.07e
• /
• pp.2130-2132
• /
• 1999

This paper is research for the practicability of instrument which can apply to the transformer on the spot with the criteria of insulation oil with the method of measuring the volume of $H_2O$ in the insulation oil by playing insulation oil with the significant role for precaution diagnosis on breakdown of transformer among power system into Nd:YAG laser.

• Proceedings of the KIEE Conference
• /
• 2003.07c
• /
• pp.1644-1646
• /
• 2003

This paper presents recent studies on the on-line insulation monitoring and diagnostic systems for transformers developed by HHI. Sufficiently high sensitivity and accuracy for practical use were achieved for the system, combined with communication networks to provide an on-line remote monitoring system. Several alarm criteria are formulated to enable a superimposed monitoring system to perform decisive action. The reasons for monitoring the condition and maintaining the health of electrical apparatus were discussed. The experience at the fields and the criteria for the judgment are also discussed in detail.