• Archives of Pharmacal Research
• /
• 제27권3호
• /
• pp.295-299
• /
• 2004

The antifungal activities of the essential oil from Agastache rugosa and its main component, estragole, combined with ketoconazole, one of the azole antibiotics commonly used to treat infections caused by Trichophyton species, were evaluated in this study. The combined effects were measured by the checkerboard microtiter and the disk diffusion tests, against T. erinacei, T. mentagrophytes, T. rubrum, T. schoenleinii and T. soudanense. Susceptibility of the five Trichophyton species to the oil alone, or ketoconazole alone, differed distinctly. The fractional inhibitory concentration indices (FICI) of ketoconazole combined with estragole or A. rugosa essential oil, against the tested Trichophyton species, were between 0.05 and 0.27, indicating synergistic effects. These drug combinations exhibited the most significant synergism against T. mentagrophytes, with FICIs of 0.05 and 0.09 for estragole and the essential oil fraction from A. rugosa, respectively. Isobolograms based on the data from checkerboard titer tests also indicated significant synergism between ketoconazole and the Agastache oil fraction or estragole, against the Trichophyton species evaluated. Trichophyton susceptibility to ketoconazole was significantly improved by combination with the Agastache rugosa oil fraction or its main component, estragole.

• Tribology and Lubricants
• /
• 제17권3호
• /
• pp.198-208
• /
• 2001

A Parametric study based on a computer analysis of the lubrication system of a four-cylinder gasoline engine is illustrated. Through the parametric study, the effects of various aeration levels on the change of oil flow rate and pressure are investigated. Also, at high oil temperature and low engine speed, the effect of oil aeration level on oil flow characteristics in lubrication system is investigated. The illustrated results may give to designers the guide lines of oil aeration level for the safe design of engine lubrication systems in terms of minimum pressure at crank oil bore.

• Environmental Sciences Bulletin of The Korean Environmental Sciences Society
• /
• 제4권4호
• /
• pp.227-230
• /
• 2000

Bunker-A oil-degrading microorganisms were isolated from a marine environment using an enrichment culture technique. The isolated strain EL-081K was identified as the genus Acinetobacter based on the results of morphological, culture, and biochemical tests. The optimal temperature and initial pH for bunker-A oil degradation were $25^{\circ}C$ and 7.0, respectively, including aeration. The optimal medium composition for the degradation of bunker-A oil by Acinetobacter sp. EL_O81K was 10 ml/l bunker-A oil as the carbon source and 0.1% (NH$_4$)$_2$SO$_4$as the nitrogen source. Under the above conditions, the biodegradability of bunker-A oil was 38% after 96 hours of incubation. The addition of detergent did not increase the bunker-A oil degradation.

• 대한전자공학회:학술대회논문집
• /
• 대한전자공학회 2002년도 하계종합학술대회 논문집(1)
• /
• pp.283-286
• /
• 2002

For the satisfying performance of a oil lubricator, design of a oil controller for the system which meets the required specifications and its supporting hardware that keep their functioning is important. Among the hardware of a control system, oil system are most vulnerable to malfunction. Thus it is necessary to keep track of accurate and reliable oil readings for good fusion oil lubricator performance. In case of oil lubricator ,data loss, ssr trigger error faults, they are detected by examining the data system output values and the major values of the system, and then the faults are recognized by the analysis of symptoms of faults. If necessary electronic -sensor values are synthesized according to the types of faults, and then they are used for the controller instead of the raw data. In this paper, a fast-32bit cpu micorprocessor applied to the control of flexible link system with the sensor fault problems in the error module fer exact positioning to show the applicability. It is shown that the fusion oil lubricator can provide a satisfactory loop performance even when the sensor faults occure

• 한국수소및신에너지학회논문집
• /
• 제31권2호
• /
• pp.223-233
• /
• 2020

Fast pyrolysis is one of the most promising technologies for converting biomass to liquid fuels. Pyrolysis bio-oil can replace petroleum-based fuels used in various thermal conversion devices. However, pyrolysis bio-oil is completely different from petroleum fuels. Therefore, in order to successfully use pyrolysis bio-oil, it is necessary to understand the fuel characteristics of pyrolysis bio-oil. This paper focuses on fuel characteristics and upgrading methods of pyrolysis bio-oil and discusses how these fuel characteristics can be applied to the use of pyrolysis bio-oils. In addition, the fuel quality standards of fast pyrolysis bio-oil were examined.

• Natural Product Sciences
• /
• 제22권1호
• /
• pp.30-34
• /
• 2016

A simple and rapid method based on proton nuclear magnetic resonance spectroscopy was developed for determination of trans-anethole content in fennel essential oil. Spectra of pure trans-anethole, of the pure essential oil of fennel, and of the pure oil of fennel with thymol internal standard were recorded. The signal of $H-1^/$ was used for quantification of trans-anethole. This proton signal is well separated in the proton magnetic resonance spectrum of the compound. No reference compound is needed and cheap internal standard was used. The results obtained from spectroscopic analysis were compared with those obtained by gas chromatography. Additionally, the developed method was used for determination of the type of vegetable oil used as a carrier in commercial products, which cannot be quantified as such by gas chromatography. This study demonstrates the application of proton nuclear magnetic resonance spectroscopy as a quality control method for estimation of essential oil components.

• 환경영향평가
• /
• 제7권2호
• /
• pp.89-102
• /
• 1998

The purpose of this study is to seek AEI(Air Environmental Indices), PSI(Pollutant Standard Index) and the urban air quality control goal(the best available alternative energy program) by assessing the best ratio of energy types used in urban enterprises, based on harmful health effect and air quality standard and costs. This study is focused on an urban area(Puchun), where area sourcees are associated with heavy traffic, large population, and its industrial sources with large emissions. In the first step, air modeling, estimation of AEI and PSI, and benefit-cost analysis were carried out. In the second step, we assessed that 660 scenarios about the ratio of B-C oil, light oil and LNG used in urban enterprises with regard to air quality and cost. In the third step, the best available alternative energy program was selected for the ratio of energy species(B-C oil, light oil and LNG) by using the lexicographic method. From the emission analysis, main source of $NO_2$ is identified as industries and air quality is evaluated according to the ratio of B-C oil, light oil and LNG used in urban enterprise. The modeling data of TSP, $SO_2$, $NO_2$, CO, $O_3$, by ISC3 and PBM are respectively $118{\mu}g/m^3$, 0.027ppm, 0.025ppm, 2.0ppm, 0.55ppm in indurstrial area. That data are close to Environmental Air Quality Standard. By means of sensitivity analysis, we obtained the difference in concentration between the areas(Nae-dong, Joong-dong) according to the ratio of B-C oil, light oil and LNG used in the industries. From the result of alternatives assessment the lowest AEI value and cost, the ratio of B-C oil, light oil and LNG are 2.5%, 20%, 77.5%, respectively.

• Elastomers and Composites
• /
• 제44권3호
• /
• pp.315-322
• /
• 2009

이피디엠/폴리프로필렌 열가소성 경화물을 오일의 배합 순서를 달리한 두 가지 방식(오일 블렌드 후 가교방식과 가교 후 오일 블렌드 방식)으로 제조하여 가교도(겔분율), 경도, 인장강도, 신율, 용융흐름지수 등을 조사, 오일의 블렌드 방식이 열가소성 경화물의 물성에 미치는 영향을 알아보았다. 오일의 블렌드 방식에 따른 두 경화물의 가교도와 기계적 물성의 차는 크지 않았으나, 가공성에 있어서는 가교 후 오일 블렌드 방식으로 제조한 경화물의 용융흐름지수가 현저히 증가한 결과를 보였다.

• 제어로봇시스템학회:학술대회논문집
• /
• 제어로봇시스템학회 2000년도 제15차 학술회의논문집
• /
• pp.477-477
• /
• 2000

A multifunctional sensor is designed to measure viscosity, cleanness, temperature and capacitance of engine oil to make a clear decision on its condition. The simple structure helps easy fabrication and low cost while measuring four parameters by one sensor. The operation is described theoretically and is supported by experimental data. A fuzzy based algorithm to fuse the four kinds of data from multi-functional sensor in order to make a decision on the best time to change the oil is proposed.

• Journal of Electrical Engineering and Technology
• /
• 제10권5호
• /
• pp.2105-2119
• /
• 2015

This paper reported the experimental result of dielectric properties of Refined, Bleached and Deodorized Palm Oil (RBDPO) combined with 0-50% of Refined, Bleached and Deodorized Soybean Oil (RBDSO). The dielectric strength and relative permittivity of RBDPO/RBDSO was higher compared to mineral oil at all ranges of ratios and temperatures which indicated a positive sign for its possible use as insulating liquid in a transformer. All ratios of the RBDPO/RBDSO mixture also demonstrated lower dissipation factor compared to mineral oil at 40℃, 70℃ and 90℃. Apart from that, the kinematic viscosity for the oil mixtures shown exceeded the IEC 60296 as well as the mineral oil results. 70%RBDPO/30%RBDSO mixture ratio was chosen as the best mixing percentage after comparison was made with the mineral oil and IEC 60296 standard where the mixture accumulated the most satisfactory of dielectric properties hence making it as the potential candidate for palm and soybean-based transformer oil.