• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.21 no.8
• /
• pp.2090-2098
• /
• 1996

This paper analyzes decorrelating detector for synchronous packet CDMA communications where a set of quasiorthogonal code waveforms are generated from a common code by assigning distinct initial code phases to all users. In this analysis, we characterize the residual multiple-access interference (MAI) caused by possibletiming offsets when synchronous and simultanceous packet transmissions are on the reverse link of centralize networks. Also, to show feasibility of decorrelating detector employing the common code, we further investigate its robustness against the multipath channel. It is demonstrated that the decorrelating detector greatly reduces the residual MAI to the order of N$^{-2}$ , N number of chips/bit, and yields significant performance gain compared to the single user detector.

• Proceedings of the Korean Society of Broadcast Engineers Conference
• /
• 2009.11a
• /
• pp.43-46
• /
• 2009

이 논문에서는 직교 주파수 분할 다중화(orthogonal frequency division multiplexing : OFDM) 시스템의 수신기에서 발생하는 다중 주파수 옵셋의 영향을 제거하는 방법을 제안한다. 다중 주파수 옵셋은 서로 다른 송신기로부터 동일한 신호를 수신할 때, 두 송신기의 발진 주파수가 서로 다르기 때문에 발생한다. 광대역 전송 시스템의 변복조 방식으로 널리 사용하고 있는 OFDM 방식은 대역효율이 높고 채널 추정이 간단하다는 장점이 있다. 그러나 OFDM 방식은 주파수 옵셋에 매우 민감 하다는 단점이 있다. 이 논문에서는 시간 영역에서의 1차적인 주파수 보정과 주파수 영역에서의 2차적인 채널간 간섭 제거방법을 적용하여 다중주파수 옵셋에 의한 영향을 효과적으로 제거하는 방법을 제안한다.

• Journal of Korea Society of Industrial Information Systems
• /
• v.20 no.5
• /
• pp.107-115
• /
• 2015

Residential building owners are turning toward renovating their existing buildings to improve old and inefficient HVAC systems. Due to the renovation, much of the added costs will inevitably be passed on to tenants by increasing rent rates. This increment often increases the vacancy rate in the buildings. To balance the interests of both owners and tenants, this paper suggested a method to determine an appropriate rental rate increment for the HVAC system renovation. A case study on residential buildings was conducted to determine a balanced point where the rental rate increment that offsets the amount tenants are willing to pay for the renovation. To calculate all costs incurred by the renovation, life-cycle cost analysis was carried out. Therefore, this paper ultimately provides a threshold value of rental rate increment such that building owners can make a reasonable decision on the HVAC system renovation.

• 한국정보디스플레이학회:학술대회논문집
• /
• 2000.01a
• /
• pp.75-76
• /
• 2000

Tone reproduction characteristics of color and gray have a great influence on the picture quality in visual display. In this study, we optimized tone reproduction characteristics of color and gray of CRT monitor by setting brightness to the optimum level, in which offsets for RGB channels can be assumed to zero. The optimum brightness level could be found by measuring a few tones of neutral for the combination of 2 levels of brightness and 2 levels of contrast. As the result, the relationship between normalized DAC count and normalized luminance of primary color or gray has been simply presented by gamma and result in good phosphor constancy.

• Journal of electromagnetic engineering and science
• /
• v.7 no.2
• /
• pp.64-68
• /
• 2007

An InGaP/GaAs HBT based differential Colpitts voltage control oscillator(VCO) is presented in this paper. In the VCO core, two switching transistors are introduced to steer the core bias current to save power. An LC tank with an inductor quality factor(Q) of 11.4 is used to generate oscillation frequency. It has a superior phase noise characteristics of -130.12 dBc/Hz and -105.3 at 1 MHz and 100 kHz frequency offsets respectively from the carrier frequency(1.566 GHz) when supplied with a control voltage of 0 volt. It dissipates output power of -5.3 dBm. Two pairs of on-chip base collector (BC) diodes are used in the tank circuit to increase the VCO tuning range(168 MHz). This VCO occupies the area of $1.070{\times}0.90mm^2$ including buffer and pads.

• Solar Energy
• /
• v.8 no.2
• /
• pp.57-65
• /
• 1988

The coefficients of convective heat transfer were investigated when air is jetted to surface of the heated side-wall. The temperature on the side-wall was measured when the offsets changed from 1.5 to 10.5 as 7 steps at the state of fixed Reynolds numbers that were 35000, 29000 and 23000. The experimental results are as follows: 1. The mean Nusselt number is very high on the surface of reattached flow region. 2. The offset and the recirculation flow region decreased, while the mean Nusselt number increased between the outlet of nozzle and the region of reattachment flow. 3. The local Nusselt number is not concerned with Reynolds number on the recirculation flow and on the reattached flow region when the offset decrease. But the Nusselt number increased only when Reynolds numbers on the wall jet flow region increased. 4. The mean and the maximum Nusselt number decreases linearly, and in particular its values rapidly decrease in accordance with changing of the offset from 1.5 to 3 in inverse proportion.

• Proceedings of the Korean Society for Noise and Vibration Engineering Conference
• /
• 2003.05a
• /
• pp.397-402
• /
• 2003

The FM demodulation method for a bulk homodyne laser interferometer is presented. The Doppler frequency that represents the surface velocity of a vibrating object is obtained by using the bulk homodyne laser interferometer, and converted to the voltage signal by using the proposed analogue FM demodulation circuit. The DC offsets of the interferent signals that are obtained from the bulk homodyne interferometer are eliminated by using a simple subtraction. The new method for compensation of the asymmetry of each channels is presented. The light power variation of the interferometer is normalized by using the Auto Gain Controller(AGC). The proposed FM demodulation algorithm is proved by the theoretical method, and validated by the experimental results. In experiments, the proposed FM demodulation algorithm is compared with the conventional demodulation methods.

• Proceedings of the IEEK Conference
• /
• 2006.06a
• /
• pp.159-160
• /
• 2006

We present a multiuser synchronization scheme for OFDMA uplink systems. First a new preamble structure is proposed by which timing and frequency offsets estimation is developed. Based on proposed structure a new joint synchronization scheme is presented and the simulation results show that the performance of this scheme don't suffer from the number of users.

• IEIE Transactions on Smart Processing and Computing
• /
• v.4 no.6
• /
• pp.443-449
• /
• 2015

This paper considers the physical layer security problem for a two-way vehicle-to-vehicle network, where the two source vehicles can only exchange information through an untrusted relay vehicle. The relay vehicle helps the two-way transmission but also acts as a potential eavesdropper. Each vehicle has a random velocity. By exploiting the random carrier frequency offsets (CFOs) caused by random motions, a secure double-differential two-way relay scheme is proposed. While achieving successful two-way transmission for the source vehicles, the proposed scheme guarantees a high decoding error floor at the untrusted relay vehicle. Average symbol error rate (SER) performance for the source vehicles and the untrusted relay vehicle is analyzed. Simulation results are provided to verify the proposed scheme.

• International Journal of CAD/CAM
• /
• v.8 no.1
• /
• pp.45-53
• /
• 2009

As the point sampling technology evolves rapidly, there has been increasing need in generating tool path from dense point set without creating intermediate models such as triangular meshes or surfaces. In this paper, we present a new tool path generation method from point set using Euclidean distance fields based on Algebraic Point Set Surfaces (APSS). Once an Euclidean distance field from the target shape is obtained, it is fairly easy to generate tool paths. In order to compute the distance from a point in the 3D space to the point set, we locally fit an algebraic sphere using moving least square method (MLS) for accurate and simple calculation. This process is repeated until it converges. The main advantages of our approach are : (1) tool paths are computed directly from point set without making triangular mesh or surfaces and their offsets, and (2) we do not have to worry about no local interference at concave region compared to the other methods using triangular mesh or surface model. Experimental results show that our approach can generate accurate enough tool paths from a point set in a robust manner and efficiently.