• 대한전자공학회논문지TC
• /
• 제49권1호
• /
• pp.68-72
• /
• 2012

본 논문에서는 Composite Right-/Left-Handed (CRLH) 형태의 Metamaterial 구조의 대역통과여파기를 설계하여 이를 전력증폭기의 출력 정합단에 이용함으로써 고선형 전력증폭기를 구현하였다. 제안된 대역통과여파기는 직렬형태의 캐패시터와 전송선로, 병렬형태의 인덕터와 전송선로로 이루어져 있다. 전력증폭기의 동작대역에서 손실을 최소화하고 CRLH 구조를 이용하여 2차 고조파 성분을 제한시켜 전력증폭기의 선형성을 개선하였다. 또한 협대역 대역통과여파기의 특성을 이용하여 인접채널 누수비 특성 또한 개선하였다. 제안된 전력증폭기는 각각 출력 전력과 2차 고조파, 3차 혼변조, 인접채널 전력누수비는 각각 2.14 GHz에서 38.83 dBm, -61.33 dBc, -54.67 dBc, -51.33 dBc @ 5 MHz, -56.50 dBc @ 10 MHz 의 특성을 얻었다.

• 센서학회지
• /
• 제1권2호
• /
• pp.131-145
• /
• 1992

본 논문은 SOI트랜스듀서 및 회로를 위해, Si 직접접합과 M-C국부연마법에 의한 박막SOI구조의 형성 공정을 기술한다. 또한, 이러한 박막SOI의 전기적 및 압저항효과 특성들을 SOI MOSFET와 cantilever빔으로 각각 조사했으며, bulk Si에 상당한다는 것이 확인되었다. 한편, SOI구조를 이용한 두 종류의 압력트랜스듀서를 제작 및 평가했다. SOI구조의 절연층을 압저항의 유전체분리층으로 이용한 압력트랜스듀서의 경우, $-20^{\circ}C$에서 $350^{\circ}C$의 온도범위에 있어서 감도 및 offset전압의 변화는 자각 -0.2% 및 +0.15%이하였다. 한편, 절연층을 etch-stop막으로 이용한 압력트랜스듀서에 있어서의 감도변화를 ${\pm}2.3%$의 표준편차 이내로 제어할 수 있다. 이러한 결과들로부터 개발된 SDB공정으로 제작된 SOI구조는 집적화마이크로트랜스듀서 및 회로개발에 많은 장점을 제공할 것이다.

• 한국음향학회지
• /
• 제41권2호
• /
• pp.159-165
• /
• 2022

본 논문에서는 수중 음향통신에서 Binary Phase Shift Keying(BPSK) 변조방식에 대한 프레임 동기 구조를 제안하였다. 제안된 프레임 동기 구조는 크게 두 가지로 나뉜다. 우선, 비동기 방식 상관과 Sliding 고속 푸리에 변환 방식으로 프레임의 대략적인 위치와 주파수 옵셋을 획득한다. 두번째는 주파수 오차를 신호에 보상한 후, 동기 방식 상관으로 정확한 프레임의 위치를 확인한다. 프레임 동기 구조의 성능 확인을 위해 해상실험을 수행하였다. 수신신호는 채널 특성으로 인해 전력이 크게 감소함을 확인하였으며, 이를 통해 비동기 방식 상관과 Sliding 고속 푸리에 변환 방식의 한계를 확인하였다. 결과적으로, 주파수 오차를 보상한 후 동기 방식 상관방식을 사용함으로써 안정적인 프레임 동기를 획득할 수 있었다.

• 한국CDE학회논문집
• /
• 제10권1호
• /
• pp.61-69
• /
• 2005

In the global ship structure and vibration analysis, the FE(finite element) analysis model is required in the early design stage before the 3D CAD model is defined. And the analysis model generation process is a time-consuming job and takes much more time than the engineering work itself. In particular, ship structure has too many associated structural members such as stringers, stiffness and girders etc. These structural members should be satisfied as the constraints in analysis modeling. Therefore it is necessary to support generation of analysis model with satisfying these constraints as an automatic manner. For the effective support of the global ship analysis modeling, a method to generate analysis model using initial design information within ship design process, that hull form offset data and compartment data, is developed. In order to easily handle initial design information and FE model information, flexible data structure is proposed. An automatic quadrilateral mesh generation algorithm using initial design information to satisfy the constraints imposed on the ship structure is also proposed. The proposed data structure and mesh generation algorithm are applied for the various type of vessels for the usability test. Through this test, we have verified the stability and usefulness of this system including mesh generation algorithm.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 1995년도 하계학술대회 논문집 C
• /
• pp.1431-1433
• /
• 1995

This paper describes the characteristics of Si Hall sensors fabricated on a SOI(Si-on-insulator} structure, in which the SOI structure was forrmed by SDB(Si-wafer direct bonding) technology. The Hall voltage and the sensitivity of implemented Si Hall devices show good linearity with respect to the applied magnetic flux density and supplied current. The product sensitivity of the SDB SOI Hall device is average $600V/A{\cdot}T$. In the temperature range of 25 to $300^{\circ}C$, the shifts of TCO(Temperature Coefficient of the Offset Voltage) and TCS(Temperature Coefficient of the product Sensitivity) are less than ${\pm}6.7{\times}10^{-3}/^{\circ}C$ and ${\pm}8.2{\times}10^{-4}/^{\circ}C$, respectively. From these results, Si Hall sensors using the SOI structure presented here are very suitable for high-temperature operation.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 1995년도 춘계학술대회 논문집
• /
• pp.227-229
• /
• 1995

Using thermal oxide SiO$_2$ as a dielectrical isolation layer, SOI Hall sensors without pn junction isolation have been fabricated on Si/SiO$_2$/Si structures. The SOI structure was formed by SDB (Si- wafer direct bonding) technology. The Hall voltage and the sensitivity of Si Hall devices implemented on the SDB SOI structure show good linearity with respect to the appled magnetic flux density and supplied current. The product sensitivity of the SDB SOI Hall device is average 600V/V.T. In the trmperature range of 25 to 300$^{\circ}C$, the shifts of TCO(Temperature Coefficient of the Offset Voltage) and TCS(Temperature Coefficient of the Product Sensitivity) are less than ${\pm}$ 6.7x10$\^$-3/ C and ${\pm}$8.2x10$\^$04/$^{\circ}C$, respectively. These results indicate that the SDB SOI structure has potential for the development of Hall sensors with a high-sensitivity and high-temperature operation.

• 한국세라믹학회지
• /
• 제26권5호
• /
• pp.670-676
• /
• 1989

The PbTiO3 is well known materials having remarkable ferroelectric, piezoelectric, and pyroelectric properties. PbTiO3 thin films with a perovskite structure were successfully fabricated on titanium substrate by chemical vapor deposition. These films were characterized according to composition, crystal structure, and electrical properties. Semi-quantitative compositional analysis of the deposited films was made by Auger Electron Spectroscopy(AES). The PbTiO3 film deposited on titanium substrate at the deposition temperature 75$0^{\circ}C$, the Ti(C2H5O)4 fraction 0.15, and O2 partial pressure 0.06atm, has a columnar structure and grows with(001) preferred orientation, and has stoichiometric composition. A clear dielectric transition and offset in the dc conductivity near the transition temperature(48$0^{\circ}C$) were observed in the deposited lead titanate film.

• 한국전자파학회:학술대회논문집
• /
• 한국전자파학회 2005년도 종합학술발표회 논문집 Vol.15 No.1
• /
• pp.101-106
• /
• 2005

This paper presents a new microwave oscillator incorporating a corrugated coplanar waveguide (CCPW) electromagnetic bandgap (EBG) structure as its terminating resonance component. The use of a compact CCPW EBG structure was effective in reducing the phase noise and improving the harmonic characteristics of the microwave oscillator circuit without additional backside processing and drastic size increment. The fully planar CCPW oscillator oscillating at the frequency of 5.41 GHz showed a phase noise characteristic of -90.7 dBc/Hz at 100kHz offset and a second harmonic suppression of 42.67 dB.

• ETRI Journal
• /
• 제29권4호
• /
• pp.430-436
• /
• 2007

An OFDM/offset QAM (OQAM)-IOTA system uses the isotropic orthogonal transform algorithm (IOTA) function, which has good localization properties in the time and frequency domains. This is employed instead of the guard interval used in a conventional OFDM/QAM system in order to be robust for multi-path channels. However, the conventional channel estimation scheme is not valid for an OFDM/OQAM-IOTA system due to the intrinsic inter-symbol interference of the IOTA function. In this paper, a condition is derived to reduce the intrinsic interference of the IOTA function. This condition is obtained with the proposed pilot structure used for perfect channel estimation. We also derive the preamble structure appropriate for practical channel estimation of the OFDM/OQAM-IOTA system. Simulation results show that the OFDM/OQAM-IOTA system with the proposed preamble structure performs better than the conventional OFDM system, and it has the additional advantage of an increased data transmission rate which corresponds to the guard interval retrieval.

• 한국철도학회:학술대회논문집
• /
• 한국철도학회 2010년도 춘계학술대회 논문집
• /
• pp.557-563
• /
• 2010

Mode II interlaminar fracture toughness was measured and fractured surfaces were observed of carbon/epoxy and glass/epoxy woven fabric composites for carbody structure. Woven fabric carbon/epoxy and glass/epoxy composites that made with prepreg and epoxy resin(RS1222) are used in carbody structure of Korean tilting train(TTX) and low floor bus. ENF(End Notched Flexure) specimens having $120mm{\times}20m{\times}5mm$ shape and 35mm initial crack were made with each composites and three point bending tests according to ASTM D790 were conducted for these specimens. Crack lengths in tests were recorded using optical microscope and digital camcorder. NL(Non Linear), 5% offset and Max. load points in load -displacement curves were checked and mode II interlaminar fracture toughness of these points were calculated and compared. Fractured surfaces of specimens were observed using optical microscope and mode II delamination behavior of each composites was discussed.