• 전기학회논문지P
• /
• 제65권1호
• /
• pp.18-24
• /
• 2016

In order to service restoration and enhance power system reliability, a number of impedance based fault location algorithms have been developed for fault locating in a transmission line. This paper presents an advanced impedance-based fault location algorithms in a two-ended sources transmission line to reduce the DC offset error effects. This fault location algorithm uses of the GPS time synchronized voltage and current signals from the local and remote terminal. The algorithm uses an advanced DC offset removal filter. A series of test results using ATPdraw simulation data show the performance effectiveness of the proposed algorithm. The proposed algorithm is valid for a two-end sources transmission network.

• 한국컴퓨터정보학회논문지
• /
• 제22권8호
• /
• pp.15-23
• /
• 2017

In this paper, the block reweighting and global offset initialization methods are proposed to complement the improved IRLMS algorithm which is the effective algorithm in registration based SBNUC algorithm. Proposed block weighting method reweights the error map whose abnormal data are excluded. The global offset initialization method compensates the global nonuniformity initially. The ordinary registration based SBNUC algorithm is hard to compensate global nonuniformity because of low scene motion. We employ the proposed methods to improved IRLMS algorithm, and apply it to real-world infrared raw image stream. The result shows that new implementation provides 3.5~4.0dB higher PSNR and convergence speed 1.5 faster then the improved IRLMS algorithm.

• 한국전자파학회:학술대회논문집
• /
• 한국전자파학회 2003년도 종합학술발표회 논문집 Vol.13 No.1
• /
• pp.87-90
• /
• 2003

In this paper, A feedforward linear power amplifier is analyzed for imperfect signal cancellation and negative feedback for basestaion of IMT2000 band. the distortion generatied by the error amplifier is reduced using an imperfect signal cancellation for a 1-carrier WCDMA source by 4.3dB at 2.5MHz offset and 6dB at 5MHz offset of IMSR(intermodulation signal power ratio) compared to a perfect signal cancellation system. additionally, An imperfect signal cancellation using negative feedback improved 1.3dB and 8.2dB at 2.5MHz and 5MHz offset of IMSR compared to an imperfect signal cancellation.

• 대한기계학회논문집
• /
• 제16권9호
• /
• pp.1627-1631
• /
• 1992

본 연구에서는 균열길이 감소현상의 처리법에 대하여 고찰하고자 하며, 내용 을 요약하면 다음과 같다. (1) 오프세트(offset)법의 배경 및 오프세트법에 의한 균열길이 감소현상의 처리 방법 을 제안하였다. (2) 실제의 균열길이의 측정과 $J_{IC}$실험해석을 통하여, 수정식과 오프세트법의 타 당성을 검토하였다.

• 설비공학논문집
• /
• 제21권6호
• /
• pp.340-346
• /
• 2009

This paper numerically investigates thermo-flow characteristics of offset strip fins to obtain a correlation between heat transfer and pressure drop. The flow was divided into three regimes, i.e. laminar, transition and turbulent. The predicted j and f values from the SST k-$\omega$ turbulence model agreed with previous correlations with the error less than 20% in transition and turbulent regimes. Heat transfer and pressure drop were predicted by varying Prandtl number from 0.5 to 40. The Prandtl number showed little effects on pressure drop but had great effect on the heat transfer characteristics. An overall correlation to predict j was suggested by incorporating the effect of Pr and a new j correlation was suggested for each Pr.

• 대한설비공학회:학술대회논문집
• /
• 대한설비공학회 2008년도 동계학술발표대회 논문집
• /
• pp.233-238
• /
• 2008

This paper numerically investigates thermo-flow characteristics of offset strip fins to obtain a correlation between heat transfer and pressure drop. The flow was divided into three regimes, i.e. laminar, transition and turbulent. The predicted j and f values from the SST k-$\omega$ turbulence model agreed with previous correlations with the error less than 20% in transition and turbulent regimes. Heat transfer and pressure drop were predicted by varying Prandtl number from 0.5 to 40. The Prandtl number showed little effects on pressure drop but had great effect on the heat transfer characteristics. An overall correlation to predict j was suggested by incorporating the effect of Pr and a new j correlation was suggested for each Pr.

• ETRI Journal
• /
• 제29권5호
• /
• pp.596-606
• /
• 2007

It is well known that an OFDM receiver is vulnerable to synchronization errors. Despite fine estimations used in the initial acquisition, there are still residual synchronization errors. Though these errors are very small, they severely degrade the bit error rate (BER) performance. In this paper, we propose a residual error elimination scheme for the digital OFDM baseband receiver aiming to improve the overall BER performance. Three improvements on existing schemes are made: a pilot-aided recursive algorithm for joint estimation of the residual carrier frequency and sampling time offsets; a delay-based timing error correction technique, which smoothly adjusts the incoming data stream without resampling disturbance; and a decision-directed channel gain update algorithm based on recursive least-squares criterion, which offers faster convergence and smaller error than the least-mean-squares algorithms. Simulation results show that the proposed scheme works well in the multipath channel, and its performance is close to that of an OFDM system with perfect synchronization parameters.

• 한국통신학회논문지
• /
• 제31권9C호
• /
• pp.905-913
• /
• 2006

펄스 방식(Impulse radio)의 초광대역(Ultra-Wideband) 시스템의 타이밍 동기과정에서 획득/추적 과정이 이상적으로 수행되더라도 잔여 타이밍 오차는 존재하게 된다. 이러한 잔여 타이밍 오차는 시스템의 성능에 큰 영향을 미치게 된다. 본 논문에서는 상관 검출 수신기에서 미세 타이밍 오차를 보상하기 위해 보조신호(Reference signal)를 이용한 디지털 위상고정 루프(Digital Phase-Locked Loop)를 제시한다. 우선, 미세 타이밍 오차에 의한 비트에러률(Bit Error Rate:BER)의 성능 열화를 고찰한 후, 타이밍 추적기를 사용함으로써 타이밍 오차가 보상되는 과정과 보상 후 BER 성능을 제시한다. 그리고 타이밍 검출기는 보조신호와 수신신호간의 상관을 이용하는 방식이 제안되었으며 샘플링 주기는 프레임 단위로 이루어지도록 설계되었다. 또한, 본 논문은 성능비교를 위해 여러 종류의 가우시안 모노사이클 펄스에 대해 성능 평가를 수행한다.

• 한국통신학회논문지
• /
• 제29권1A호
• /
• pp.18-30
• /
• 2004

본 논문에서는 비동기 CBMA 시스템에서 발생하는 배열 안테나 소자의 오차 보정(calibration) 문제를 다룬다. 수신기치 주파수 오프셋 오차가 있을 경우에 적용 가능한 새로운 순차적인 오차 보정 알고리즘을 제안한다. 제안된 알고리즘은 비선형 배열 안테나에도 적용가능하며, 사전에 알고 있는 신호를 사용하여 보정하는 것이 아니라, 셀 내의 임의의 사용자 PN code 만을 사용하여 온라인으로 오차 보정을 수행한다. 제안된 알고리즘은 채널과 주파수 오차를 추정하는 부분과 배열안테나 보정을 추정하는 부분으로 구성되어 있으며, 컴퓨터 모의 실험과 W-CDMA용 스마트 안테나 테스트 베드에서 얻어진 실측 데이터를 이용한 실험을 통하여 그 성능이 검증되었다.

• 전기학회논문지
• /
• 제65권6호
• /
• pp.1108-1114
• /
• 2016

The cause of failure in the AT feeding system is divided into grounding, short-circuit of feeding circuit and internal faults of the railway substation. Since the fault current is very high, real-time current is detected and the failure must be immediately removed. In this paper, a new DC offset elimination filter that can remove component to decrease in the form of exponential function using low-pass filter was proposed in order to extract the fundamental wave from distorted fault current. In order to confirm the performance of the proposed filter method, AT feeder system was modelled by simulation tool and simulations were performed under various conditions such as fault location, fault resistance and fault voltage phase angle in case of trolley-rail short-circuit fault. When applying the proposed DC-offset removal method, it can be seen that the phase delay and gain error did not appear.