• KOREAN JOURNAL OF CROP SCIENCE
• /
• v.49 no.3
• /
• pp.172-178
• /
• 2004

When soybean sprouts aye grown in the closed condition (where the ratio of $\textrm{O}_2$ and $\textrm{CO}_2$ is 7 ： 3), amount of $\textrm{CO}_2$ is increased and $\textrm{O}_2$ is decreased with the passage of time. At the same time, the amount of ethylene is automatically increased. By increasing the concentration of ethylene gas up to 0.5-1.0 ppm in the growth room, the length of sprouts was restricted to 6-7 cm and the thickness of sprouts was increased to 2.70$\pm$0.30 mm. The production of good quality sprouts which were fat and short was possible without application of any growth regulators such as indole-3-acetic acid known to have accumulation problem in humane body. To maintain the freshness during the transportation and prevent sprouts from rotting and bad smell at market, cold storage at 2-$5^{\circ}$ and airtightness which will restrict photosynthesis and respiration (higher than $10^{\circ}$) are needed. The freshness of sprouts is depended on the increase of $\textrm{CO}_2$ and the depletion of $\textrm{O}_2$ in the package. When the sprouts were stored below 1$0^{\circ}C$ (preferably below 8$^{\circ}C$), the concentration of $\textrm{CO}_2$ in the package remained below 30% for more than 60 hours, which was possible to keep sprouts in freshness without any offensive odor, But sprouts were maintained at $13^{\circ}$ for more than 25 hours, the concentration of $\textrm{CO}_2$ increased over 30% and produced an offensive odor. The little amount of $\textrm{O}_2$ gas was existing for 30 hours at $5^{\circ}$ but it was disappeared completely within 7 hours over $10^{\circ}$ and the sprouts became rot and produced severe offensive odor.

• Clean Technology
• /
• v.18 no.4
• /
• pp.379-389
• /
• 2012

Environmental issues are being paid more attention due to income growth, urban overcrowding, and population growth in Korea. Among the various environmental problems, odor damage is the one of the serious factors. To take example for food waste combination treatment in Su-young wastewater treatment plant in Busan, many complaints occurred because this plant locate around residential areas. The purpose of this work is not only to analyze odorous elements and their contributions but also to evaluate odor quotient (OQ), sum of odor quotient (SOQ), and treatment efficiency of bio-filter. The results of dilution sensory test of complex odor, grinder, leachate, hopper indicated higher order complex odors happen in July and August. The main odorous elements consisted of hydrogen sulfide, ammonia, methly mercaptan and acetaldehyde, which were analyzed by instrumental detection method, and methyl mercaptan was exceeded over 3,571 times of threshold. In addition, result of contribution of odor was methyl mercaptan (49.95 to 59.08%), hydrogen sulfide (20.43 to 29.27%), trimethylamine (8.82 to 13.42%) and acetaldehyde (9.17 to 11.35%). Other facilities were compared with the contribution of the odor using OQ and SOQ during the process. Sulfur compounds, acetaldehyde, and trimethylamine are high contribution of odor using OQ as well as odor intensity of grinding process is highest. As a result, sulfur compounds (e.g., methyl mercaptan and hydrogen sulfide) are highest for OQ and SOQ of grinding process is highest as 7,067. The removal efficiency of deodorization equipment was more than 90.00% in ammonia and amines, but the average efficiency of sulfur compounds was 53.51%. Thus, this facility is more higher contribution of acetaldehyde and trimethylamine than other treatment facilities. And food waste treatment in environmental area needs to consider appropriate capacity and refers to other bio-filter operating conditions.

• Korean Journal of Environmental Agriculture
• /
• v.25 no.2
• /
• pp.124-128
• /
• 2006

To reducing offensive odor form compost UIW-6 mutant obtained by UV treatment from sulfur-oxidizing bacteria, Thiobacillus sp. IW. The UIW-6 mutant was found 1.6 times faster in growth than the parent strain on thiosulfate medium (TM) at 36 h after incubation. Initial pH, temperature and agitation for the optimum growth of UIW-6 were 6.5, $35^{\circ}C$ and 200 rpm, respectively. The UIW-6 mutant growth was two times higher than parent strain at 6 h culture in TM liquid medium containing 50 mM sodium thiosulfate. The UIW-6 mutant used fructose and sucrose as carbon sources and yeast extract> tryptone> peptone as nitrogen ones. It was found that the growth of UIW-6 was increased in addition of 0.2% yeast extract.

• Analytical Science and Technology
• /
• v.18 no.3
• /
• pp.216-223
• /
• 2005

In this study, several kinds of volatile amines in ambiant air were collected and their concentrations were expected from the calibration curves prepared by standard solutions of 7 amines by the official measuring method prescribed in Japanese Offensive Odor Law. The obtained calibration curves showed a good linearity and the detection limit of trimethyl amine was found to be about 0.033 ppb (0.040 ng) in case of 50 liters air. It means that trimethyl amine could be detected with the concentration of lower than its permitting level at the border line of companies. As typical examples of measuring amines in air, results of investigation of two sewage works and one rendering plant around the capital area indicated that 4 kinds of amines, i.e. methyl amine, dimethyl amine, trimethyl amine and isopropyl amine were detectable and concentrations of trimethyl amine at the primary sedimentation pond and sludge dewatering building of the sewage plant A showed 9.07 ppb and 7.79 ppb respectively, being over the concentration of odor strength 2.5, And the aeration tank, excrement input facility and indoor of maintenance room of excrement process building in the sewage plant B showed 70.0 ppb of dimethyl amine and 2.44 ppb of trimethyl amine.

• Journal of the Korean Professional Engineers Association
• /
• v.18 no.2
• /
• pp.6-15
• /
• 1985

A new process disregraded the H$_2$SO$_4$ treatment process heretofore in use, was developed and substituted for mineral base engine used oil of homemade SAE-30 grade H.V.I., which was used covering 4,500km, as samples, and the following results in research, was obtained. (1) A good quality of rerefinded base oil was obtained through roughly a course of developed processes of vacuum distillation process, solvent extraction process, neutralization treatment process and clay treatment process. (2) Through vacuum distillation process, the size of fine grains of insoluble colloid carbon that is, colloid carbon which was produced by burning of internal combustion engine oil and fuel, could be brought up and precipitated (3) The insoluble matters and admixtures could be easily dispersed and dissolved by mixing and extracting solvent disregarded the H$_2$SO$_4$ treatment process heretofore in use (4) waste matter heretofore called acid sludge in consequence of the process, did not appear at all. accordingly, the environmental pollution could be removed. (5) The troubles of corrosion to copper strip which was faults of the usual used oil refined products and peculiar offensive odor of the rerefined oil, could be solved through the neutralization process. (6) The yield of rerefined oil obtained through a course of processes was over 86 percent, and it is of practical use, not to speak of commercial value.

• Journal of Biosystems Engineering
• /
• v.33 no.4
• /
• pp.253-259
• /
• 2008

In this paper an optimum design of a lab-scale biofilter for absorbing ammonia has been proposed and analyzed. This biofilter is using pine chaff and wood shaving as filter materials. It is assumed that the biofilter can be used as a storage tank of swine manure slurry or swine stall. To evaluate the biofilter performance, the ammonia, mainly offensive odor ingredient, was measured. Swine compost was mixed with filter materials in ratio of 1:1 on weight base. Each test continued for 20 days. The ammonia emissions were reduced by 97.9% and 98.3% in case of using biofilter filled with pine chaff and compost, and wood shaving and compost, respectively. The system was tested with and without adding compost. It was found that the biofilter with wood shaving and compost has an ammonia removal efficiency of 94.1%, while biofilter with wood shaving only has 85.3%. The biofilter with wood shaving and compost showed 8.8% higher removal efficiency than that of wood shaving only. By mixing the compost, the number of microorganism was found to be about 2.3 times more than that of wood shaving only. Therefore it can be concluded that adding compost has a positive effect on the formation of microorganism.

• Journal of Korean Society of Water and Wastewater
• /
• v.30 no.1
• /
• pp.99-104
• /
• 2016

This study was performed to develop a new process technology for advanced wastewater treatment using a modified Rotating Activated Bacillus Contactor (RABC) process that adopts anoxic-oxic suspended biomass tanks to enhance nutrients removal. A modified lab-scale RABC process was applied to examine its applicability and to obtain the design factors for the optimum operation of the system. The modified RABC process showed a little more stable and high nutrients removal efficiency than the prototype RABC process: about 70% of nitrogen and 55% of phosphorous removal when the low organic loading (influent COD 200mg/L). However, the processing efficiency of nutrients removal rates was enhanced to great extent when high organic loading: nitrogen 90% and phosphorous 85% (influent COD 500mg/L). High organic loading stimulated extremely good biomass attachment on the reticular carrier RABC stage and the excellent nutrients removal, nevertheless with almost no offensive odor.

• Journal of Environmental Science International
• /
• v.16 no.6
• /
• pp.763-769
• /
• 2007

This study compared the performance of a bioscrubber, a biofilter, and a combined system of bioscrubber and biofilter employed being operated at the laboratory-scale. for the removal of hydrogen sulfide. The bioscrubber maintained 100% removal of hydrogen sulfide up to inlet load of $56\;g-S/m^3{\cdot}hr$, while the removal efficiency was decreased with the increase of inlet load. The biofilter showed 100% removal efficiency up to inlet load of $126\;g-S/m^3{\cdot}h$ and the maximum elimination capacity of $126\;g\;S/m^3{\cdot}h$ for the inlet load of $224\;g-S/m^3{\cdot}h$. On the other hand, the combined system of bioscrubber and biofilter showed 100% removal for an inlet hydrogen sulfide load of up to $85\;g-S/m^3{\cdot}h$ and the maximum elimination capacity of $153\;g-S/m^3{\cdot}h$ for inlet loads of $224\;g-S/m^3{\cdot}h$.

• The Journal of the Korean dental association
• /
• v.55 no.9
• /
• pp.640-656
• /
• 2017

Xerostomia is usually caused by a reduced salivary flow or by changes in the biochemical composition of saliva. Halitosis or oral malodor is an offensive odor usually originating from the oral cavity. Halitosis can lead to anxiety and psychosocial embarrassment. The occurrence of halitosis closely related with intraoral conditions including the presence of xerostomia. Especially, the relationship between xerostomia and halitosis is prominent in elderly patients receiving polypharmacy with at least two systemic diseases. This study is a review of the update literature of xerostomia and halitosis. A large number of papers have been searched and identified using the words , , , , , , and . Papers not relevant to the issue were removed reducing the entries to 79 only. Most of identified papers were systematic reviews, non-systematic reviews, and observational studies. With a proper diagnosis, identification of the etiology and timely referrals certain steps are taken to create a successful individualized therapeutic approach. It is significant to highlight the necessity of an interdisciplinary method for the treatment of xerostomia and halitosis to prevent misdiagnosis or unnecessary treatment. This article concisely focuses on the development of a systemic flow of events to come to the proper treatment of the xerostomia and halitosis.

• Journal of the Korean Institute of Gas
• /
• v.18 no.5
• /
• pp.52-59
• /
• 2014

In general, sulfur containing odorants are added to fuel gases, such as LPG, and city gas, to prevent gas poisoning, ignition, explosion, or other accident caused by fuel gases, and to enable immediate and easy detection of fuel-gas leakage by emitting an offensive smell. In this study, sulfur free odorant for low sulfur fuel and prevention of metal corrosion were developed to replace current sulfur containing odorant for gas fuel. They were selected from 12 odorant containing non-sulfur organic compounds and evaluated by odor olfactory method (odor quality, odor intensity). Finally, selected mixture odorants were methyl isovalerate, methyl acrylate, 2-ethyl-3-methyl pyrazine with blending ratio of 50% : 40% : 10%. Final Sulfur free odorant was added 40 wt ppm in LPG fuels and evaluated fuel quality characteristics, metal corrosion test and long term stability of LPG fuel. It were limit in current LPG fuel standard in fuel quality characteristics. Final Sulfur free odorant also had no influence on metal corrosion and long term stability test with 60 days by adding in LPG fuels. Finally, they were shown to be warning agent candidates to reduce sulfur content and metal corrosion for LPG fuel.