• 한국해양공학회지
• /
• 제33권4호
• /
• pp.364-376
• /
• 2019

When underwater blasting is conducted, both shock waves and water waves have an effect on adjacent coastal areas. In this study, an empirical formula for estimating the details of water waves caused by underwater blasting was applied to a non-reflected wave generation system, and a 3D numerical wave tank (NWT) was improved to reproduce the generation and propagation of such water waves. The maximum elevations of the propagated water waves were comparatively analyzed to determine the validity and effectiveness of the NWT. Good agreement was demonstrated between the empirical and simulation results. The generation and propagation of water waves were also simulated under each underwater blasting scenario for the removal of the Todo islet at the Busan Newport International Terminal (PNIT). It was determined that the water waves generated by the underwater blasting scenario examined in this study did not have a significant impact on the PNIT. In addition, multiple-charge blasting caused higher wave heights than single-charge blasting. As the amount of firing charge increased, the wave height also increased. Finally, larger water waves were generated during the later blasting conducted at a deeper depth as compared with an earlier blasting conducted at a relatively shallow depth.

• 대한조선학회논문집
• /
• 제54권6호
• /
• pp.522-529
• /
• 2017

Air gun shock system is used as an alternative energy source as part of the attempt to overcome the restrictions of economical expense and environmental damage, etc., due to the use of explosives for the UNDerwater EXplosion (UNDEX) shock test. The objectivity of this study is to develop the simulation technique of air gun shock test for the design of model-scale one for the near field non-explosive UNDEX test through its verification with full-scale SERCEL shock test result. Underwater blasting response analysis of full-scale air gun shock test was carried out using highly advanced M&S (Modeling & Simulation) system of FSI (Fluid-Structure Interaction) analysis technique of LS-DYNA code, and was verified by comparing its shock characteristics and behaviors with the results of air gun shock test.

• 한국해양공학회:학술대회논문집
• /
• 한국해양공학회 2004년도 학술대회지
• /
• pp.260-265
• /
• 2004

The materials of ship screw propeller are commonly the manganese bronze. The seawater corrosion and cavitation of the screw propeller reduce tire propulsive performance of ship. In screw manufactory, tire corrosion rust of tire screw propeller is removed by a hand grinding. The grinding work makes the dust of the heavy metals from the manganese bronze. The dust makes indoor working environment poor. A friendly-environmental and automatic corrosion removing apparatus was developed for the improvement of screw processing and working environment. The corrosion rust of a screw propeller was remarkably removed by using apparatus. And the screw surface roughness was improved by a blasting effect of the apparatus performance test. Anode polarization curves on jour processing conditions, that is to say, grinding, blasting, wire-brushing, fine sand papering, were confirmed by a potentiostat. Especially, two kinds of medias, alumina and emery, were used in the blasting processing. Then, investigated tire cavitation erosion of specimen. This result proved that tire blasting work has considerably improved the corrosion resistance of a screw propeller.

• 한국해양공학회지
• /
• 제19권6호통권67호
• /
• pp.72-77
• /
• 2005

The materials used in a ship screw propeller are commonly made with brass. The seawater corrosion and seawater cavitation of the screw propeller reduces the propulsive performance of the ship. In screw manufacturing, the corrosion rust of the screw propeller is removed through a hand grinding method. The grinding process produces dust of the heavy metals from the brass. The dust creates a poor working environment that is harmful to the health of the workers. An automatic corrosionrust removing apparatus, using a blasting method, was developed for the improvement of screw polishing conditions and its working environment. The performance of this apparatus was investigated by surface roughness, weight loss rate, hardness, electrochemical corrosion resistance, and cavitation erosion, after removing of the corrosion rust under various blasting conditions. Two medias of alumina and emery were used in this experiment. The surface roughness and hardness of the screw were improved by this apparatus. The electrochemical corrosion potential (Ecorr) and current density (Icorr) were measured by the dynamic polarization method, using a potentiostat,under the conditions of surface polishing with grinding, blasting, wire brushing, and fine sand papering. The test results prove that the new corrosion rust-removing apparatus improves the surface performance of a screw propeller.

• 한국항해항만학회:학술대회논문집
• /
• 한국항해항만학회 2009년도 공동학술대회
• /
• pp.419-424
• /
• 2009

수중암반파쇄는 주로 중추에 의한 파쇄와 수중발파에 의존하였습니다. 그러나 최근에는 연안양식과 항만증설에 따라 수중암반파쇄민원이 해소되는 암반파쇄방법으로 대체하고있습니다. 암반파쇄 구역에 인접해 있는 지형, 양식장, 각종시설물 및 부대전자장비와 환경보호구역등을 고려하여 해양환경을 보호하는 효과적인 암반파쇄방법을 검토하였습니다. 파쇄암반수량, 암질특성, 분포상태를 조사하고 암반파쇄시공속도를 고려하여 효과적인 암반파쇄방법을 비교검토하였습니다. 해안 주변역, 즉 연안역의 활용도가 높아지므로 수중암반파쇄민원을 해결하고 환경을 보호하면서 해양시설건설이 동시에 이루어지는 암반파쇄방법으로서 효과적인 방법을 비교검토하였습니다.

• 화약ㆍ발파
• /
• 제28권2호
• /
• pp.86-98
• /
• 2010

건설공사에서의 소음 및 진동발생에 대한 민원은 끊임없이 대두되고 있으며, 삶의 질이 향상되어감에 따라 민원의 종류가 다양해지며, 발생빈도 역시 증가되고 있는 현실이다. 현재까지 정립된 발파공해에 대한 방지대책 및 규제기준의 대부분은 육상에서 이루어지는 피해사례를 토대로 연구된 결과물들이다. 하지만 최근들어 공사구간과 인접하여 강, 바다 또는 육상 양식장에서의 수중생물에 대한 피해사례가 증가되고 있는 추세이며, 민원인들이 주장하는 피해액도 수억~수십억에 해당한다. 그러나 이에 따른 규제 및 관리기준 등이 정립되지 않아 분쟁조정에 대한 설득력 있는 결과물이 없다는 것이 문제시 되고 있는 현실이다. 따라서 수중소음의 특성을 명확히 하고, 발파작업에 의한 지반진동과 수중소음의 실측실험을 통해 상관성을 도출하여, 양식장 부근의 발파 작업 시 지반진동계측을 통한 수중소음을 예측하고, 민원을 관리한 사례를 소개하고, 이를 수중소음평가를 위한 하나의 지표로 제시하고자 한다.

• 한국해양공학회지
• /
• 제12권1호
• /
• pp.32-38
• /
• 1998

This paper is to investigate of microhardness, adhesive strength, tensile strength, and fatigue strength of ceramic sprayed steel. Rotary bending fatigue tests have been conducted at room temperature in air and 3% NaCl solution using specimens of carbon steel(S45C) with sprayed coating layers of Ni-4.5% Al(under coating) and $TiO_2$ (top coating). The microhardness has been improved at $800^{\circ}C$ heat treatment and 150mm spraying distance. Tensile strength of the sprayed steel is dependent on the substrate strength. The fatigue strength of the sprayed steel is larger than that of substrate due to blasting and constraint surface of plastic deformation effect. In low stress level, the corrosion fatigue strength of the sprayed steel were lower than that of fatigue strength in air by corrosion.

• 한국지반공학회논문집
• /
• 제24권4호
• /
• pp.57-66
• /
• 2008

본 연구에서는 쪼갬 인장시험과 Fang, H. Y. and Fernandez(1981)에 의해 고안된 일축관입시험을 통한 동결토의 인장강도를 살펴보았다. 본 연구는 영하 15도의 환경 속에서 화강풍화토, 표준사와 카오리가 혼합된 사질 혼합토의 일축관입인장강도와 쪼갬 인장강도가 어떻게 변화하는지를 고찰하였다. 동결공시체는 함수비, 점토함량에 따라 다양하게 실험을 실시하였으며, 함수비와 점토함유량에 따라 일축관입인장강도와 쪼갬 인장강도간의 상호관계를 분석하였다. 결과를 요약하면, 평균적으로 쪼갬 인장강도는 일축관입인장강도에 비해서 4배정도 큰 강도를 나타내었다. 함수비가 증가함에 따라 두 인장강도간의 차이가 크게 나타났으며, 그리고 점토함량이 증가할수록 두 인장강도는 모두 감소하는 경향을 나타내었다.

• 화약ㆍ발파
• /
• 제18권3호
• /
• pp.99-106
• /
• 2000

The geology of Nogsan industrial estate area, Pusan, Korea consists mainly of andesitic rocks, rhyolitic rocks and hornblende granite. They are then intruded by basic and acidic dikes. All of the igneous activities in this area are in Cretaceous time, that is the lower part of Silla group in Gyoungsang basin. Andesitic volcanic rocks are distributed in two separate basines: Saengok basin and Doodong basin. Although both basines contain andesite and andesitic breccia(Kab), younger andesitic activity was more active to the western Doodong basin giving very little influence on the eastern Saengok basin. Sediments in the area are quarternaly alluvium and colluvium. Alluvium is very thick and consists mainly of silt and clay deposited as delta deposits at the mouth of Nakdong river. Colluvium in the area is short distributary channel deposits. The area is largely filled with socks and sediments to build industrial estates especially on the delta deposits at Shinhodong area and on the shoreline mud bed between Yongwondong and Shinhodong. A careful investigation to avoid the possibility of a large scale mud flow is suggested because it could be trigered by many reason such as an earthquake or a flood on the land where a heavily loaded salt-water may soaked into the muddy bed lying on the granitic basement gently dipping toward the ocean. Althouth the area is in the Yangsan fault zone no ground evidence of fault can be seen despite the RESTEC sattlite image gives excelent traces of linearments in the area.

• 한국해양공학회지
• /
• 제26권2호
• /
• pp.14-19
• /
• 2012

There are insufficient data to consider the effect zone for the marine life of coastal fisheries, because no standard has been defined for the sound level of marine life. In this study, equations for distance attenuation were used to determine the effect zone for oceanic noises. A reference noise level was divided into 4 parts to consider the characteristics of the fishes, and the effect zone of each reference noise level was determined. To increase the reliability of the effect scope, approximately 100 repetitions of blasting work split into several parts by the boring depth, the sound level of the source caused by an increase in weight, and the effect zone were calculated using the prediction equation. According to the prediction, the maximum distance of the effect zone was 4.92 km.