• 분석과학
• /
• 제13권2호
• /
• pp.258-267
• /
• 2000

1995년부터 실시해 온 산업보건 분야의 '유해물질 및 대사물 분석의 실험실간 정도관리 프로그램'(공식명: 특수건강진단기관 분석정도관리)의 5년간 실시 경과와 결과를 보고하고, 고찰을 통하여 우리나라 산업보건분야 실험실 서비스의 질관리를 위한 앞으로의 방향 등을 제시하고자 한다. 산업현장에서 많이 쓰이는 4가지 혈중 중금속과 5가지 유기용제 대사물에 대하여 연구원에서 제조된 표준시료를 분배하고 결과 분석값과 크로마토그람 등 관련 자료들을 분석하여 참가기관에 대한 분석능력 평가를 실시하였다. 연 2회 실시된 정도관리 결과는 인터넷 등을 통하여 고시하여 산업보건 관련 실험실들의 자율적인 질관리 서비스 경쟁을 유도하고, 관련 실험실 서비스의 사용자인 근로자, 사업주, 산업보건 관련자들의 알 권리를 충족시켜, 실험실의 분석데이타에 대한 객관적인 신뢰도를 확보하고 산업보건 서비스의 질 향상에 크게 기여하였다.

• Safety and Health at Work
• /
• 제15권2호
• /
• pp.192-199
• /
• 2024

Background: Safety data sheets (SDSs) are hazard communication materials that accompany chemicals/hazardous products in the workplace. Many SDSs contain dense, technical text, which places considerable comprehension demands on workers, especially those with lower literacy skills. The goal of this study was to assess SDSs for readability, comprehensibility, and suitability (i.e., fit to the target audience). Methods: The Suitability Assessment of Materials (SAM) tool assessed SDSs for suitability and readability. We then amended the SAM tool to further assess SDSs for comprehensibility factors. Both the original and amended SAM tool were used to score 45 randomly selected SDSs for content, literacy demand, graphics, and layout/typography. Results: SDSs performed poorly in terms of readability, suitability, and comprehensibility. The mean readability scores were Flesch-Kincaid Grade Level (9.6), Gunning Fog index (11.0), Coleman-Liau index (13.7), and Simple Measure of Gobbledygook index (10.7), all above the recommended reading level. The original SAM graded SDSs as "not suitable" for suitability and readability. When the amended SAM was used, the mean total SAM score increased, but the SDSs were still considered "not suitable" when adding comprehensibility considerations. The amended SAM tool better identified content-related issues specific to SDSs that make it difficult for a reader to understand the material. Conclusions: In terms of readability, comprehensibility, and suitability, SDSs perform poorly in their primary role as a hazard communication tool, therefore, putting workers at risk. The amended SAM tool could be used when writing SDSs to ensure that the information is more easily understandable for all audiences.

• Safety and Health at Work
• /
• 제4권3호
• /
• pp.123-135
• /
• 2013

Exposure to manganese (Mn) is associated with neurobehavioral effects. There is disagreement on whether commonly occurring exposures in welding, ferroalloy, and other industrial processes produce neurologically significant neurobehavioral changes representing parkinsonism. A reviewof methodological issues in the human epidemiological literature onMnidentified: (1) studies focused on idiopathic Parkinson disease without considering manganism, a parkinsonian syndrome; (2) studies with healthy worker effect bias; (3) studies with problematic statistical modeling; and (4) studies arising from case series derived from litigation. Investigations with adequate study design and exposure assessment revealed consistent neurobehavioral effects and attributable subclinical and clinical signs and symptoms of impairment. Twenty-eight studies show an exposure-response relationship between Mn and neurobehavioral effects, including 11 with continuous exposure metrics and six with three or four levels of contrasted exposure. The effects of sustained low-concentration exposures to Mn are consistent with the manifestations of early manganism, i.e., consistent with parkinsonism. This is compelling evidence thatMnis a neurotoxic chemical and there is good evidence that Mn exposures far below the current US standard of $5.0mg/m^3$ are causing impairment.

• 한국산업보건학회지
• /
• 제19권3호
• /
• pp.280-287
• /
• 2009

High-tech microelectronics industry is known as one of the most chemical-intensive industries. In Korea, Microelectronics industry occupied 38% of export and 16% of working employees work in microelectronics industry. But, chemical information and health hazards of high-tech microelectronics manufacturing are poorly understood because of rapid development and its penchant for secrecy. We need to investigate on chemical use and exposure control. We Site-visits to 6 high-tech microelectronics manufacturing company which have cleanroom work using over 1,000kg organic solvents (5 semi-conductor chips and its related parts company, 1 liquid crystal display (LCD)). We reviewed their data on chemical use and ventilation system, and measured TVOCs (Total Volatile Organic Compounds) and carbon dioxide concentration. All cleanroom air passed through hepa filters to acheive low particle levels and only 1 cleanroom uses carbon filters to minimize the organic solvents exposures In TVOC screening test, Cleanroom for semi-conductor chips and its related parts company with laminar down flow system (e.g. class 1~100) showed nondetectable level of TVOCs concentration, but Cleanroom for liquid crystal display (LCD) with conventional flow system (e.g. class 1,000~10,000) showed 327 ppm as TVOCs. Acetone concentration in cleanroom for Jig cleaning, LC Injection, Sealing processes were 18.488ppm (n=14), 49.762 ppm (n=15), 8.656 ppm (n=14) as arithmetric mean. Acetone concentration in cleanroom for LCD inspection process was 40ppm (n=55) as geometric mean, where the range was 7.8~128.7ppm and weakly correlated with ventilation rate efficiency(r=0.44, p<0.05). To control organic solvents in cleanrooms, chemical and carbon filters should be installed with hepa filters. Even though their volatile organic compounds concentration was not exceed to occupational exposure limits, considering of entrance limited cleanroom environment, long-term period exposure effects and adverse health effects of cleanroom worker need further reseach.

• Safety and Health at Work
• /
• 제3권2호
• /
• pp.146-153
• /
• 2012

Objectives: The introduction of computerized numeric control (CNC) technology in manufacturing industries has revolutionized the production process, but there are some health and safety problems associated with these machines. The present study aimed to investigate the extent of postural discomfort in CNC machine operators, and the relationship of this discomfort to the display and control panel height, with a view to validate the anthropometric recommendation for the location of the display and control panel in CNC machines. Methods: The postural discomforts associated with CNC machines were studied in 122 male operators using Corlett and Bishop's body part discomfort mapping, subject information, and discomfort level at various time intervals from starting to end of a shift. This information was collected using a questionnaire. Statistical analysis was carried out using ANOVA. Results: Neck discomfort due to the positioning of the machine displays, and shoulder and arm discomfort due to the positioning of controls were identified as common health issues in the operators of these machines. The study revealed that 45.9% of machine operators reported discomfort in the lower back, 41.8% in the neck, 22.1% in the upper-back, 53.3% in the shoulder and arm, and 21.3% of the operators reported discomfort in the leg. Conclusion: Discomfort increased with the progress of the day and was highest at the end of a shift; subject age had no effect on patient tendency to experience discomfort levels.

• Safety and Health at Work
• /
• 제14권4호
• /
• pp.390-397
• /
• 2023

Introduction: Biological risks are a major global problem in the workplace. The recent COVID-19 pandemic has highlighted the need for a more comprehensive understanding of the biological risks at work. This study presents data on both communicable infectious biological agents and noncommunicable factors leading to death and disability for the year 2021. Methods: We followed the methodology established by the International Labour Organization (ILO) in their past global estimates on occupational accidents and work-related diseases. We used relevant ILO estimates for hazardous substances and related population attributable fractions derived from literature, which were then applied to World Health Organization mortality data. The communicable diseases included in the estimates were tuberculosis, pneumococcal diseases, malaria, diarrheal diseases, other infectious diseases, neglected tropical diseases, influenza associated respiratory diseases and COVID-19. Noncommunicable diseases and injuries considered were Chronic Obstructive Diseases (COPD) due to organic dusts, asthma, allergic reactions and risks related to animal contact. We estimated death attributable to biological risk at work and disability in terms of disability adjusted life years (DALYs). Results: We estimated that in 2022, 550,819 deaths were caused by biological risk factors, with 476,000 deaths attributed to communicable infectious diseases and 74,000 deaths caused by noncommunicable factors. Among these, there were 223,650 deaths attributed to COVID-19 at work. We calculated the rate of 584 DALYs per 100,000 workers, representing an 11% increase from the previous estimate of the global burden of work-related disabilities measured by DALYs. Conclusion: This is a first update since previous 2007 ILO estimates, which has now increased by 74% and covers most biological risks factors. However, it is important to note that there may be other diseases and deaths are missing from the data, which need to be included when new information becomes available. It is also worth mentioning that while deaths caused by major communicable diseases including COVID-19 are relatively rare within the working population, absences from work due to these diseases are likely to be very common within the active workforce.

• Safety and Health at Work
• /
• 제8권4호
• /
• pp.386-392
• /
• 2017

Background: Fire service workers often implement multiple duties in the emergency conditions, with such duties being mostly conducted in various ambient temperatures. Methods: The aim of the current study was to assess the firefighters' physiological responses, information processing, and working memory prior to and following simulated firefighting activities in three different hot environments. Seventeen healthy male firefighters performed simulated firefighting tasks in three separate conditions, namely (1) low heat (LH; $29-31^{\circ}C$, 55-60% relative humidity), (2) moderate heat (MH; $32-34^{\circ}C$, 55-60% relative humidity), and (3) severe heat (SH; $35-37^{\circ}C$, 55-60% relative humidity). It took about 45-50 minutes for each firefighter to finish all defined firefighting activities and the paced auditory serial addition test (PASAT). Results: At the end of all the three experimental conditions, heart rate (HR) and tympanic temperature (TT) increased, while PASAT scores as a measure of information processing performance decreased relative to baseline. HR and TT were significantly higher at the end of the experiment in the SH ($159.41{\pm}4.25beats/min$; $38.22{\pm}0.10^{\circ}C$) compared with the MH ($156.59{\pm}3.77beats/min$; $38.20{\pm}0.10^{\circ}C$) and LH ($154.24{\pm}4.67beats/min$; $38.17{\pm}0.10^{\circ}C$) conditions (p < 0.05). There was no significant difference in PASAT scores between LH and MH (p > 0.05). Nonetheless, there was a measurable difference in PASAT scores between LH and SH (p < 0.05). Conclusion: These consequences demonstrate that ambient temperature is effective in raising the physiological responses following firefighting activities. It is therefore argued that further increase of ambient temperature can impact firefighters' information processing and working memory during firefighting activity.

• Safety and Health at Work
• /
• 제14권3호
• /
• pp.272-278
• /
• 2023

Background: Some working conditions may pose a higher physical or psychological demand to pregnant women leading to increased risks of pregnancy complications. Objectives: We assessed the association of woman's employment status and the industrial classification with obstetric complications. Methods: We conducted a national population study using the National Health Information Service database of Republic of Korea. Our analysis encompassed 1,316,310 women who experienced first-order live births in 2010-2019. We collected data on the employment status and the industrial classification of women, as well as their diagnoses of preeclampsia (PE) and gestational diabetes mellitus (GDM) classified as A1 (well controlled by diet) or A2 (requiring medication). We calculated odds ratios (aORs) of complications per employment, and each industrial classification was adjusted for individual risk factors. Results: Most (64.7%) were in employment during pregnancy. Manufacturing (16.4%) and the health and social (16.2%) work represented the most prevalent industries. The health and social work exhibited a higher risk of PE (aOR = 1.11, 95% confidence interval [CI]: 1.03-1.21), while the manufacturing industry demonstrated a higher risk of class A2 GDM (1.20, 95% CI: 1.03-1.41) than financial intermediation. When analyzing both classes of GDM, women who worked in public administration and defense/social security showed higher risk of class A1 GDM (1.04, 95% CI: 1.01, 1.07). When comparing high-risk industries with nonemployment, the health and social work showed a comparable risk of PE (1.02, 95% CI: 0.97, 1.07). Conclusion: Employment was associated with overall lower risks of obstetric complications. Health and social service work can counteract the healthy worker effect in relation to PE. This highlights the importance of further elucidating specific occupational risk factors within the high-risk industries.

• 한국산업보건학회지
• /
• 제33권1호
• /
• pp.78-90
• /
• 2023

Objectives: The purpose of this study is to standardize the process code of the work environment measurement database (WEMD) for the construction of a job-exposure matrix (JEM). Methods: The standard process code (SPC) was reclassified based on process similarity and drawing upon the code used in the existing K2B. It was supplemented through review by industrial hygiene experts. In addition, an index word database related to SPC was created and used for SPC search. A pilot evaluation project was conducted by experts to evaluate the validity of the newly reclassified standard process code. Results: A total of 70 final SPCs were developed, including 31 processes related to the construction industry. Using the Shiny program, we developed a standard code finder that can be used on the web (https://kscf.shinyapps.io/scf_app/). As a result of the pilot evaluation, it was determined that it was easier to search for standard codes than previous codes, so it was highly utilized. Conclusions: It is expected that JEM construction using industry-process information drawing on WEMD data will be possible using the 70 newly standardized process codes.

• 한국안전학회지
• /
• 제36권3호
• /
• pp.31-39
• /
• 2021

In Korea, more than half of work-related fatalities have occurred on construction sites. To reduce such occupational accidents, safety inspection by government agencies is essential in construction sites that present a high risk of serious accidents. To address this issue, this study developed risk prediction models of serious accidents in construction sites using five machine learning methods: support vector machine, random forest, XGBoost, LightGBM, and AutoML. To this end, 15 proactive information (e.g., number of stories and period of construction) that are usually available prior to construction were considered and two over-sampling techniques (SMOTE and ADASYN) were used to address the problem of class-imbalanced data. The results showed that all machine learning methods achieved 0.876~0.941 in the F1-score with the adoption of over-sampling techniques. LightGBM with ADASYN yielded the best prediction performance in both the F1-score (0.941) and the area under the ROC curve (0.941). The prediction models revealed four major features: number of stories, period of construction, excavation depth, and height. The prediction models developed in this study can be useful both for government agencies in prioritizing construction sites for safety inspection and for construction companies in establishing pre-construction preventive measures.