• Journal of Labour Economics
• /
• v.26 no.1
• /
• pp.75-110
• /
• 2003

It is urgent to systematically understand vocational training and qualification systems in advanced nations in order to evaluate and reform the Korean counterparts. In the British case, the system has been transformed from the market-led one to the state-led one while the German system is still classified as a corporatistic one. This structural difference is crucial to understand their performances and the German one won a relatively more positive evaluation in its performance. However, the structure and function of the German system has lately revealed numerous limitations in face of the political unification and long duration of economic recessions. This study shows that those differences in structural and functional features and recent developments of the systems in two nations are closely associated with their differences in educational philosophies and occupational cultures, roles of the state and employers, and operation mechanisms of training courses and vocational qualifications systems. Understanding those national differences raises a fundamental question on the hasty prescription of some domestic studies that a few policies in the foreign systems must be implanted to reform the Korean counterpart without understanding the fundamental difference between the domestic and those foreign systems.

• The Journal of Korean Physical Therapy
• /
• v.25 no.5
• /
• pp.273-281
• /
• 2013

Purpose: The purpose of this study is to determine the effect of motor imagery training on residual upper extremity strength and activities of daily living of chronic cervical spinal cord injury patients. Methods: Twelve ASIA A B patients, who had more than a 12-month duration of illness and C5 or 6 motor nerve injury level, were randomly divided into experimental group (n=6) and control group (n=6). Patients in the experimental group performed motor imagery training for five minutes prior to general muscle strengthening training, while those in the control group performed general muscle strengthening training only. The training was performed five times per week, 30 minutes per day, for a period of four weeks. General muscle strengthening training consisted of a progressive resistive exercise for residual upper extremity. Motor imagery training consisted of imagining this task performance. Before and after the training, EMG activity using BTS Pocket Electromyography and Spinal Cord Independent Measure III(SCIM III) were compared and analyzed. Results: The residual upper extremity muscle strengths showed improvement in both groups after training. Comparison of muscle strength improvement between the two groups showed a statistically significant improvement in the experimental group compared to the control group (p<0.05). SCIM III measurements showed significant improvement in the scores for Self-care and Transfer items in the experimental group. Conclusion: Motor imagery training was more effective than general muscle strengthening training in improving the residual upper extremity muscle strength and activities of daily living of patients with chronic cervical spinal cord injury.

• Journal of Korean Society of Occupational and Environmental Hygiene
• /
• v.11 no.1
• /
• pp.1-8
• /
• 2001

This study was performed to evaluate a local exhaust ventilation system capability and welding fume concentration in welding laboratory at 5 technical high schools. Results of the study are as follows; 1. The personal exposure of welding fume in welding laboratory was measured. The geometric mean of 73 personal samples was $6.27mg/m^3$($3.85{\sim}9.88mg/m^3$), and 68.5% of these exceeded TLV of the Korea Ministry of Labor. 2. The geometric mean of welding fume at outside of booth was $2.27mg/m^3$($1.57{\sim}2.58mg/m^3$). All of measured concentrations were lower than TLV of the Korea Ministry of Labor. 3. Local exhaust ventilation system in welding laboratory could not remove hazardous substance effectively because of inappropriate canopy hood and absurd design. 4. The possibility of exposure risk was estimated to be high because of working point under breathing zone, misplacement of working table and insufficient supply of respiratory protector. 5. The mean values of capture velocity and transportation velocity of local exhaust ventilation system in welding laboratory were 0.38m/sec, 4.27m/sec respectively. These values were satisfied the guideline of the Korea Ministry of Labor. 6. The efficiency of performance of local ventilation system was anticipated to be decreased because of accumulated dust and alien substance on fan and duct.

• Journal of Korean Society of Occupational and Environmental Hygiene
• /
• v.23 no.2
• /
• pp.75-83
• /
• 2013

Objectives: This study was conducted to estimate quartz concentrations in the airborne respirable dust from concrete manufacturing industries and to compare performance of two analytical methods, direct on filter(DOF) and the transfer methods in the Fourier Transform Infrared Spectroscopy(FTIR). Methods: Total 36 area samples were collected from 8 concrete manufacturing industries. Each respirable dust sample was collected by a 25 mm cassette attached to a 10 mm Dorr-Oliver nylon cyclone. The quartz content was estimated using the intensity of the absorption peak of quartz at $799cm^{-1}$ by FTIR. Results: By the comparison of quartz content in respirable dust between the two methods, the results of using DOF method were higher than that of transfer method. And the result of quartz concentrations in respirable dust estimated by DOF method were mostly higher than those by transfer method. Statistically significant difference of quartz concentrations in respirable dust were not found in shakeout, input, loading and transporting processes by two methods. But quartz concentrations in the molding process had the statistically significant difference between DOF and transfer method. Conclusions: The results of the study is suggested that, it be needed to correct the influence of the interferences in order to establish the DOF method when interfering minerals have an effect on quantitative analysis of quartz in respirable dust by the direct on filter method with FTIR.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.19 no.2
• /
• pp.137-143
• /
• 2018

As the elderly population grows, the use of assistive products that facilitate independent living by the elderly is increasing. Assistive product specialists are important to selecting the correct assistive products. Therefore, it is necessary to grasp the needs of assistive product users. This study was conducted to identify the key tasks that should be prioritized through analysis of the needs of assistive product users of assistive product specialist's job competence Questionnaires were administered to 84 assistive product users in person and by mail. The questionnaire was designed to investigate the importance of work and educational needs based on the job of the assistive product specialist. Based on the results, the priorities of five duties and 12 key tasks were derived. The key tasks are highly demanded by assistive product users and must be included in the performance of the job of the assistive product specialist. Based on this study, it is expected that elderly people will gain independence and improve their quality of life in their homes and communities through an individualized approach.

• International Journal of Safety
• /
• v.11 no.2
• /
• pp.15-21
• /
• 2012

This paper is aimed to develop an electrical fire detection system (EFDS) which can analyze the possibility of electrical fire for overcurrent, leakage current and arc signals of panel board in traditional market shop. The EFDS adopted fuzzy logic and precursory data for overcurrent, leakage current and arc signals to evaluate the possibility of electrical fire. The signals are obtained directly from panel board in traditional market shops and fuzzy membership function is obtained from experiment, simulation, expert's advice. The overcurrent data is acquired by thermal data of normal and abnormal states (partial disconnection) on the insulated electrical wire, in accordance with the increase of the current signal, The leakage current data is obtained under various environments. The arc signal is acquisited by waveforms of instantaneous value in time domain and frequency band in frequency domain. The Fuzzy algorithm for DB of EFDS consists of fuzzification, inference engine by Mamdani's method and defuzzification by center of gravity method. In order to verify the performance and reliability of EFDS, it was applied to Jeon-Ju traditional market shops (90 shops) in Korea. Results show that EFDS in this paper is useful in alarming the fire case, which will prevent severe damage to human beings and properties, and reduce the electrical fires in a vulnerable area of electrical disaster.

• Journal of the Korean Society of Safety
• /
• v.22 no.2 s.80
• /
• pp.59-66
• /
• 2007

As the need of handling heavy materials increases, various cranes are used in industries. However, the effectiveness of crane also entails industrial accidents such as falling, constriction etc. In fact, the number of fatal accidents caused by crane is still high in Korea. To find out the causes of the accidents in terms of human error, we developed a man-machine system model that consists of two axes; human information processing and crane life cycle. In the human information processing dimension, we simplified it as five functions; sensing and perception, decision making and memory, response etc. In the crane life cycle dimension, we divided it into nine phases; design, production, operation etc. For the 152 fatal accident records during 1999-2006 years, we classified them into 45 cells made by two axes. Then we identified the preceding causes of the classified crane accident based on performance shaping factors. As the results of statistical analysis, the overall trend of crane fatal accidents was described. For the cause analysis, wrong decision making in work plan phase shows the highest frequency. Next, the poor information input in crane operation followed in accident frequency. In ergonomics view, the problems of interface design in displays and controls made 11.8% of fatal accidents. Following the analysis, several ergonomic design guidelines to prevent crane accidents were suggested.

• Journal of Labour Economics
• /
• v.27 no.1
• /
• pp.107-134
• /
• 2004

This paper attempts to find out the economic roots of the increasing tendency not to choose the science and engineering (S&E) fields in the colleges. The analysis shows that the relative economic position of the S&E graduates measured in terms of employment quality is not significantly different from that of the non-S&E graduates. But the S&E graduates earn relatively low wage and self-employment income. Furthermore, the relative income of the top 5% bracket of the S&E graduates has been declining in the recent five years. The paper concludes that low relative income of the average S&E graduates as well as the increasingly lower relative income of the most able S&E personnel, coupled with the increasing compensating differential required for the S&E jobs, is the main reason for the 'avoidance' phenomenon of the S&E fields.

• Journal of the Korea Safety Management & Science
• /
• v.3 no.3
• /
• pp.11-21
• /
• 2001

Domestic construction industry has considerable level of construction performance and technology thanks to the economic development and as the result of performing diverse oversea construction project. However, construction disasters have been steadily increasing, and do severe disasters at faster pace. Most of such disasters happen at small and small medium-sized construction fields, which contract size is less than 10 billion won. small and medium-sized construction fields are not obliged to designate a safety manager, and have limitations in engaging self-regulating disaster prevention activities due to reduced budget for safety facilities. For the small and medium-sized construction sites with less than 10 billion won, the Ministry of Labor has been carrying out mobile inspections of construction safety. However, the effect so far is insignificant and an improvement plan is required. Therefore, in the present thesis, we derive problems appearing in the current construction safety mobile inspection system, investigate and study systems in foreign countries, and suggest an efficient and effective plan to operate safety technology inspections. First of all, we establish a standard to select sites to be inspected that are high in construction risk and disaster occurrence probability In addition, we suggest a plan to take administrative and judiciary measures based on the total score for disaster factors considering the disaster occurrence probability and the illegal practices. Furthermore, a scheme to maximize the effect of disaster prevention is sought by building an organic cooperative system between the Ministry of Labor, Korea Occupational Safety ＆ Health Agency and other organizations specialized in instruction of construction disaster prevention. Finally, we induce a research conclusion that leads to self-regulating safety management through checking and instructing systematic management on mobile inspections.

• Journal of the Korean Society of Physical Medicine
• /
• v.15 no.2
• /
• pp.57-63
• /
• 2020

PURPOSE: This study examined the incidence, location, and characteristics of sports injuries according to the position in Korean national Kabaddi athletes. METHODS: Twenty-four national Kabaddi athletes (12 males and 12 females) who trained at the national training center between January 2019 and December 2019 were enrolled in this study. The event, position, and location of injury were recorded on an IOC daily injury report form. The incidence of sports injury was examined with the 95% confidence interval (CI), and the difference in the incidence of injury by position was presented as the rate ratio (RR). Moreover, the differences in the location of sports injury according to position were examined using χ² tests. RESULTS: One hundred and nine sports injuries occurred among Kabaddi players, with an incidence of 20.28 cases of injuries per 1,000 exposures (95% CI 16.47 - 24.08), and the incidence of injury was the highest among the competition, followed by training and weights. The most common location of sports injury was the lower extremity, followed by the upper extremity, trunk, head, and neck. In addition, no significant differences in the locations of the sports injuries were noted according to gender (p = .689). Furthermore, knee, ankle, lumbar spine/lower back, shoulder/clavicle were common sites of sports injury among Kabaddi players. CONCLUSION: These results provide a baseline for predicting sports injuries occurring in athletes during games, and would provide useful information for developing performance enhancement as well as injury prevention programs.