• 한국콘텐츠학회논문지
• /
• 제9권6호
• /
• pp.247-255
• /
• 2009

국내 방사선 및 방사성 동위원소 신고사업장 피폭실태를 조사하여 안전보건 관리방안 수립을 위한 기초자료를 제시한다. 153개 사업장 근로자를 surveymeter로 선량률(작업공간, 작업자위치)을 측정하였고, 27개 사업장은 thermal luminescence dosimeter(TLD)로 개인노출 농도(표층선량, 심부선량)를 측정하였다. Surveymeter에 의한 업종별[소방방재업(n=10), 금융보험업(n=3), 기타사업장(n=140)] 측정결과, 세 군 간에 차이가 있었다(p<0.000). 소방방재업과 금융보험업의 작업자위치 선량률은 허가사업장 기준인 10.0 ${\mu}Sv$/hr보다 높았고, 기타업종과 비교하여 109.3배(p<0.000), 187.5배(p<0.000) 각각 높게 나타났다. TLD 심부선량 농도[소방방재업(n=10), 기타 사업장(n=17)]는 소방방재업이 기타업종과 비교하여 높게 나타났다(p<0.05). Surveymeter와 TLD 측정결과 간의 관련성 분석에서는, 작업공간과 작업자위치 선량률(r=0.406, p<0.05), 작업자위치 선량률과 표층선량(r=0.453, p<0.05), 작업자위치 선량률과 심부선량(r=0.553, p<0.01), 표층선량과 심부선량(r=0.927, p<0.001)간에 각각 관련이 있었다. 방사선 및 방사선동위원소 신고사업장인 소방방재업과 금융보험업은 법적 관리구역 재설정을 통한 허가사업장으로의 전환은 방사선 취급 종사자의 안전보건을 위하여 매우 시급하다.

• Journal of Radiation Protection and Research
• /
• 제22권3호
• /
• pp.183-193
• /
• 1997

원전 작업자 피폭관리와 안전성 평가 및 최종적으로 처분허가를 위하여 폐기물 내의 핵종 및 농도를 파악하여야만 한다. 이온교환 수지 및 필터는 그 부피는 작으나 원전 운전중 발생하는 폐기물 내 방사능의 대부분을 차지하고 있다. 본 연구의 목적은 냉각수 정화 계통내의 수지 및 필터 내에 누적되어 있는 방사성 핵종의 양을 예측할 수 있는 방법을 개발하는 것이다. 핵종누적량을 계산하기 위하여 평균제염계수 대신 순간제염계수를 사용하였으며 포트란언어를 사용하여 프로그램을 작성하여 누적량을 계산하였다. 본 예측기법의 검증을 위하여 미국 Rancho-Seco 발전소의 측정자료를 이용하였으며 실험을 통한 계측자료를 검증에 이용하였다. 순간제염계수를 이용한 본 방법의 계산이 평균제염계수를 이용한 것보다 오차가 작았다. 이 방법을 실제 적용하기 위해서는 운전지침에 의하여 주기적으로 계측한 제염제수와 핵종농도 자료만으로도 핵종누적량 계산이 가능하다. 그러나, 특히 발전소 운전상황이 급격하게 변할 때에는, 정확한 누적량 평가를 위하여 제염계수 및 방사성 핵종농도의 측정주기가 짧아져야 한다.

• 한국정보전자통신기술학회논문지
• /
• 제13권3호
• /
• pp.267-276
• /
• 2020

제조업 근로자는 근무 환경에서 반복 작업에 의한 근골격계 질환의 위험에 쉽게 노출되어 있다. 이는 신체를 반복적으로 이용하는 직업 특성상의 문제에 기인한다. 하지만 현재 감시 및 예방을 위한 모니터링 시스템이 제공되지 않아 매년 위험에 대한 근로자의 노출도가 증가하고 있다. 본 논문에서는 IMU 센서를 사용한 웨어러블 장치 제작을 통해 실제 작업 환경에서의 이러한 문제를 해결하는 방법에 대해 제시한다. 웨어러블 형태의 장치를 착용 후, 근골격계 움직임에 따른 회전 값을 받아와 데이터 분석을 통해 사용자의 움직임을 판단해낸다. 이때, 바이어스 제거와 누적 오차를 제거해 정교한 데이터 취득하여 이를 동적 임곗값 형식으로 분석하여 사용자의 회전 운동 횟수를 측정해내어 위험도를 판단한다. 본 논문에서 제안한 웨어러블 장치를 이용 팔꿈치 근골격계 질환에 대한 회전 횟수를 측정하는 웹 페이지를 통해 본 방법의 효과를 확인할 수 있었다.

• 한국산업보건학회지
• /
• 제27권3호
• /
• pp.245-256
• /
• 2017

Objectives: The present study is aimed at performing real-time measurement of fibrous materials using an F-1 fiber monitor, investigating the correlations between the measurements and environmental conditions, and assessing the feasibility of the use of the monitor in actual exposure assessments based on the accuracy and reliability of the device. Methods: Asbestos specimens with a fixed asbestos content were dispersed in a chamber and collected with a particle measuring test device. Measurements obtained by the existing PCM method, and with the F-1 fiber monitor were compared. In addition, concentrations of asbestos fibers obtained by the PCM method, the TEM method, and the F-1 fiber monitor were compared with that of specific ABS scenarios in NOA regions. Correlations of asbestos contents in soil and weather conditions with each method of measurement were analyzed. Results: Laboratory results showed that levels of asbestos fibers measured with each method increased as fiber contents in soil increased. In the accuracy and reproducibility assessment, no significant differences were found between the different methods of measurement. On-site assessment results showed positive correlations among the methods, and these correlations were less significant compared with what was shown by the laboratory results. Levels of asbestos fibers increased as asbestos contents in soil increased, and as temperature increased. Levels of asbestos fibers decreased as humidity increased, and wind speed did not significantly affect the extent to which asbestos fibers were scattered. Conclusions: While it would be premature to replace existing methods with the use of F-1 fiber monitors in real sites based on the results of this study, the monitor may be useful in the screening of the sites, which assesses hazard levels in different regions. Replacement of existing methods with the use of F-1 fiber monitors may be possible after the limitations identified in this study are overcome, and additional assessment data are obtained and reviewed under different conditions to confirm the reliability of the monitor in future research. Obtained assessment results may be used as basic data for the assessment of asbestos hazard in NOA regions.

• Journal of Preventive Medicine and Public Health
• /
• 제40권5호
• /
• pp.363-370
• /
• 2007

Objectives: The principal objective of this study was to determine the relationship between maternal exposure to air pollution and low birth weight and to propose a possible environmental health surveillance system for low birth weight. Methods: We acquired air monitoring data for Seoul from the Ministry of Environment, the meteorological data from the Korean Meteorological Administration, the exposure assessments from the National Institute of Environmental Research, and the birth data from the Korean National Statistical Office between January 1, 2002 and December 31, 2003. The final birth data were limited to singletons within $37{\sim}44$ weeks of gestational age. We defined the Low Birth Weight (LBW) group as infants with birth weights of less than 2500g and calculated the annual LBW rate by district. The air monitoring data were measured for $CO,\;SO_2,\;NO_2,\;and\;PM_{10}$ concentrations at 27 monitoring stations in Seoul. We utilized two models to evaluate the effects of air pollution on low birth weight: the first was the relationship between the annual concentration of air pollution and low birth weight (LBW) by individual and district, and the second involved a GIS exposure model constructed by Arc View 3.1. Results: LBW risk (by Gu, or district) was significantly increased to $1.113(95%\;CI=1.111{\sim}1.116)\;for\;CO,\;1.004(95%\;CI=1.003{\sim}1.005)\;for\;NO_2,\;1.202(95%\;CI=1.199{\sim}1.206\;for\;SO_2,\;and\;1.077(95%\;CI=1.075{\sim}1.078)\;\;for\;PM_{10}$ with each interquartile range change. Personal LBW risk was significantly increased to $1.081(95%\;CI=1.002{\sim}1.166)\;for\;CO,\;1.145(95%\;CI=1.036{\sim}1.267)\;for\;SO_2,\;and\;1.053(95%\;CI=1.002{\sim}1.108)\;for\;PM_{10}$ with each interquartile range change. Personal LBW risk was increased to $1.003(95%\;CI=0.954{\sim}1.055)\;for\;NO_2$, but this was not statistically significant. The air pollution concentrations predicted by GIS positively correlated with the numbers of low birth weights, particularly in highly polluted regions. Conclusions: Environmental health surveillance is a systemic, ongoing collection effort including the analysis of data correlated with environmentally-associated diseases and exposures. In addition. environmental health surveillance allows for a timely dissemination of information to those who require that information in order to take effective action. GIS modeling is crucially important for this purpose, and thus we attempted to develop a GIS-based environmental surveillance system for low birth weight.

• Journal of Preventive Medicine and Public Health
• /
• 제36권2호
• /
• pp.137-146
• /
• 2003

과거 군 복무 기간 동안 청력에 영향을 미치는 사격 및 포격 등 소음에 노출된 군 경력이 현재 소음 노출 근로자에게 어떤 청각학적 영향을 미치며, 소음성 난청의 발생과 관련이 있는지를 평가하고자 하였다. 중소규모 선박수리 및 건조업체 15개 사업체 440명을 대상으로 근로자의 일반 사항, 임상증상, 현재의 청력과 관련한 과거 이과적 병력, 군 복무시 충격소음의 상시적 노출 등의 군 경력, 이명 등의 자각증상에 관한 설문조사와 순음청력검사 및 중이검사를 시행하였다. 현 직종에서의 소음 노출군 중 과거 군에서 소음 노출군이 각 주파수별 청력역치와 평균 청력역치가 가장 컸으며, 특히 2-8kHz의 주파수 역치에서 차이가 크게 나타났다. 청력손실자의 비율 및 중증도의 정도가 현 직종에서의 소음 노출군 중 과거 군에서 소음 노출군이 가장 높은 비율을 보였으며, 특히 감각신경성 난청으로서 소음성 난청자가 통계적으로 유의하게 더 많았다. 이명은 현재 소음 노출 직종에 있는 군에서 높았으며, 그중 군 소음 노출군이 46.2%로 유의하게 더 높았다. 소음성 난청 여부를 종속변수로 한 로지스틱 회귀분석 결과, 연령, 현 직종 근무기간, 군 소음 노출력, 현 직종에서의 소음 노출 여부가 유의한 독립변수로 작용하였다. 우측 귀의 경우, 소음성 난청에 대한 군 소음 노출력의 비차비는 4.5이었고, 현 직종의 소음 노출의 비차비는 7.9이었다. 군 소음 노출 및 현 작업 소음 노출 여부에 따른 각 군별 좌우측 귀의 4 kHz 청력역치와 평균 청력역치는 I군에서 좌우측 귀 모두 나이 및 근무기간이 증가할수록 가장 크게 영향을 미치며 유의하게 증가하였으며 II군, III군, IV군 순으로 청력 역치가 증가하였다. 군에서 노출되는 충격소음은 청력손실과 이명 등 청각학적 영향을 미치며 사업장에서 소음 노출에 따른 소음성 난청의 발생에도 부가적인 영향을 미친다. 따라서 군에서의 소음 노출에 따른 청각학적 영향을 예방하기 위해서뿐만 아니라 소음 노출 근로자에 대한 청력 관리 측면에서도 이의 조기 진단, 치료, 보상 및 재활을 위해서는 군에서의 소음 노출 문제까지 함께 다루어야 함을 시사한다.

• Journal of Trauma and Injury
• /
• 제28권1호
• /
• pp.9-14
• /
• 2015

Purpose: The aim of this study was to estimate the seropositive prevalence of blood-borne infection in neurotrauma patients who underwent emergent surgical intervention, especially patients with hepatitis B virus (HBV), hepatitis C virus (HCV), syphilis and human immunodefIciency virus (HIV). Methods: A retrospective review identified 559 patients with traumatic brain injury and spinal trauma who underwent emergent surgery between 2007 and 2014. We reviewed the medical records and extracted data, including age, sex, location of lesion, result of serologic tests, time interval of admission and surgery after presenting to emergency room. Serologic tests for HBV, HCV, syphilis and HIV were performed and analyzed to determine whether the seropositive results were confirmed by the surgeon before surgery. Results: The majority of the patients were male (74.6%), and the mean age was $55.4{\pm}20.2years$. Most patients underwent surgery due to traumatic brain injury (90.0%). Fifty-three patients (10.0%) showed a positive result on at least one serologic test. Seropositive rates according to pathogens were 0.5% for syphilis, 5.2% for HBV and 3.9% for HCV. No positive results were noted on the serologic tests for HIV. HBV in patients with spinal cord injury and age from 40 to 49 years were associated with high serologic positive rate, and that result was statistically significant. However, no statistically significant differences were found in the other variables. Serologic results could not confirmed before surgery in the majority of the cases (62.1%), and 10.4% of these patients showed seropositive results. Conclusion: The results of this study emphasize the importance of taking precautions and conducting rapid serologic testing in preventing the occupational transmission of blood-borne viruses to health-care workers.

• 한국산업보건학회지
• /
• 제16권3호
• /
• pp.254-263
• /
• 2006

Manganese has a role as both toxic and essential in humans. Manganese is also an essential component in the welding because it increases the hardness and strength, prevents steel from cracking of welding part and acts as a deoxidizing agent to form a stable weld. In this study, manganese generation rate and its content was determined in flux cored arc welding on stainless steel. Domestic two products and foreign four products of flux cored wires were tested in the well designed fume generation chamber as a function of input power. Welding fume was measured by gravimetric method and metal manganese was determined by inductively coupled plasma-atomic emission spectrophotometer. The outer shell of the flux cored wire tube and inner flux were analyzed by scanning electron microscopy to determine their metal compositions. Manganese generation rate($FGR_{mn}$) was increased as the input power increased. It was 16.3 mg/min at the low input power, 38.1 mg/min at the optimal input power, and up to 55.4 mg/min at the high input power. This means that $FGR_{mn}$ is increased at the work place if welder raise the current and/or voltage for the high productivity. The slope coefficient of $FGR_{mn}$ was smaller than that of the generation rate of total fume(FGR). Also, the correlation coefficient of $FGR_{mn}$ was 0.65 whereas that of FGR is 0.91. $FGR_{mn}$ was equal or higher in the domestic products than that of the foreign products although FGR was similar. From the electron microscopic analytical data, we concluded that outer shell of the wire was composed mainly of iron, chromium, nickel and less than 1.2 % of manganese. There are many metal ingredients such as iron, silica, manganese, zirconium, titanium, nickel, potassium, and aluminum in the inner flux but they were not homogeneous. It was found that both $FGR_{mn}$ and content of manganese was higher and more varied in domestic flux cored wires than those of foreign products. To reduce worker exposure to fumes and hazardous component at the source, further research is needed to develop new welding filler materials that improve the quality of flux cored wire in respect to these points. Welder should keep in mind that the FGR, $FGR_{mn}$ and probably the generation rate of other hazardous metals were increased as the input power increase for the high productivity.

• 한국산업보건학회지
• /
• 제32권4호
• /
• pp.287-301
• /
• 2022

Objectives: This study compared the characteristics of the work environment between agricultural and general workers and analyzed the effects of agricultural working characteristics on work-related health problems. Methods: The participants of this study were 2,347 agricultural workers and 48,042 general workers who were selected by applying standardized weights to the raw data of 50,538 respondents from the 6th Korean Working Condition Survey (KWCS). Variables applicable to both worker groups and related to exposure to hazardous risk factors in the working environment, working hours and intensity of work, health problems and work-related status, and satisfaction with the work environment were selected. Chi-square tests and independent sample t-tests were performed to evaluate the differences in the variables between the two groups. Multivariate logistic regression analysis was conducted to analyze the effects of work environment characteristics on work-related health problems. Results: Compared to general workers, agricultural workers were more exposed to hazardous environments, irregular work patterns such as working on Saturday/Sunday, and short repetitive tasks. They reported more work-related and general health problems, including back pain, upper extremity muscle pain, lower extremity muscle pain, and general fatigue. Agricultural workers showed lower satisfaction with their work environment than general workers. Factors affecting one or more work-related health problems included gender, working years, hazardous factors, irregular work pattern, working hours, and labor intensity. Conclusions: Our findings showed that agricultural workers were relatively more vulnerable to safety issues compared to other occupational groups. Therefore, it is necessary to establish standardized safety and health standards and strengthen systematic safety and health management policies and services for agriculture.

• Nutritional Sciences
• /
• 제4권2호
• /
• pp.91-97
• /
• 2001

The purpose of this study was to assess the nutritional status of Korean workers with occupational exposure to lead by estimating nutrients and flood intakes so that we can eventually establish the dietary guidelines to be recommended for the lead workers. Food consumption survey was conducted by a 24-hr recall method with 135 lead workers and 50 non-exposed controls. Food intake data were convened into nutrients intake using computer aided nutritional analysis program. Mean daily energy intake and percentage of recommended daily allowance (RDA) of male lead workers were 2138 local and 87% of RDA while those of control were estimated as 2234 kcal and 91% of RDA. Mean daily intakes of nutrients of male lead workers were 78 g (111% RDA) for protein 502 mg (71% RDA) for calcium, 11.7 mg (97% RDA) for iron, 665 $\mu$g R.E (95% RDA) for vitamin A, 1.39 mg (108% RDA) for thiamin, 1.14 mg (77% RDA) for riboflavin, 15 mg N.E (92% RDA) for niacin and 66 mg (94% RDA) for vitamin C. On average, male lead workers showed significantly lower protein, calcium, iron, sodium, potassium, niacin and vitamin C intakes than control group while cholesterol intake of the male lead workers was significantly higher than that of control group. Intakes of calcium of male lead workers were Less than 75% RDA meaning that nutritional intake of calcium of male lead workers was insufficient and could possibly result in nutritional deficient. Some food groups such as milk, meat and fish must be strongly suggested to improve nutritional status of lead workers. Continuing nutrition monitoring and appropriate nutrition intervention for lead workers most be conducted further.