• Journal of Preventive Medicine and Public Health
• /
• v.57 no.2
• /
• pp.185-196
• /
• 2024

Objectives: Excess mortality associated with long-term exposure to fine particulate matter (PM_2.5) has been documented. However, research on the disease burden following short-term exposure is scarce. We investigated the cause-specific mortality burden of short-term exposure to PM_2.5 by considering the potential non-linear concentration-response relationship in Korea. Methods: Daily cause-specific mortality rates and PM_2.5 exposure levels from 2010 to 2019 were collected for 8 Korean cities and 9 provinces. A generalized additive mixed model was employed to estimate the non-linear relationship between PM_2.5 exposure and cause-specific mortality levels. We assumed no detrimental health effects of PM_2.5 concentrations below 15 ㎍/m³. Overall deaths attributable to short-term PM_2.5 exposure were estimated by summing the daily numbers of excess deaths associated with ambient PM_2.5 exposure. Results: Of the 2 749 704 recorded deaths, 2 453 686 (89.2%) were non-accidental, 591 267 (21.5%) were cardiovascular, and 141 066 (5.1%) were respiratory in nature. A non-linear relationship was observed between all-cause mortality and exposure to PM_2.5 at lag0, whereas linear associations were evident for cause-specific mortalities. Overall, 10 814 all-cause, 7855 non-accidental, 1642 cardiovascular, and 708 respiratory deaths were attributed to short-term exposure to PM_2.5. The estimated number of all-cause excess deaths due to short-term PM_2.5 exposure in 2019 was 1039 (95% confidence interval, 604 to 1472). Conclusions: Our findings indicate an association between short-term PM_2.5 exposure and various mortality rates (all-cause, non-accidental, cardiovascular, and respiratory) in Korea over the period from 2010 to 2019. Consequently, action plans should be developed to reduce deaths attributable to short-term exposure to PM_2.5.

• Fire Science and Engineering
• /
• v.32 no.5
• /
• pp.22-33
• /
• 2018

The amount of halogen clean fire extinguishing agents has been increased by the excellent features of extinguishing, adaptability and no residue. On the other hand in situations without a hazard assessment and safety standard of agents, chemical accidents by the agents occurs frequently. This study was performed to propose the halogen clean agents' regulatory exposure limit and safety standard including the quantitative ventilation system with gas leak monitoring, hazard recognition and optimal personal protection selection through a literature review and experimental research.

• Nuclear Engineering and Technology
• /
• v.55 no.5
• /
• pp.1757-1762
• /
• 2023

Radiological hazards from external exposure of naturally occurring radioactive materials (NORM) scales residues, generated during the extraction process of oil and gas production in southern Algeria, are evaluated. The activity concentrations of ²²⁶Ra, ²³²Th, and ⁴⁰K were measured using high-purity gamma-ray spectrometry (GeHP). Mean activity concentration of ²²⁶Ra, ²³²Th and ⁴⁰K, found in scale samples are 4082 ± 41, 1060 ± 38 and 568 ± 36 Bq kg^-1, respectively. Radiological hazard parameters, such as radium equivalent (Ra_eq), external and internal hazard indices (H_ex, H_in), and gamma index (I_γ) are also evaluated. All hazard parameter values were greater than the permissible and recommended limits and the average annual effective dose value exceeded the dose constraint (0.3 mSv y^-1). However, for occasionally exposed workers, the dose rate of 0.65 ± 0.02 mSv y^-1 is lower than recommended limit of 1 mSv y^-1 for public.

• Journal of Korean Society of Forest Science
• /
• v.110 no.2
• /
• pp.210-216
• /
• 2021

Musculoskeletal disorders affect workers' safety in most industries, and forest operations are classified as a musculoskeletal burden according to the Occupational Safety and Health Act in South Korea. In particular, felling and delimbing operations are mainly conducted by manpower, and then, it is necessary to evaluate ergonomic risk assessment for safety of felling and delimbing workers. Three ergonomic risk assessment methods, such as Ovako Working posture Analysis System (OWAS), Rapid Upper Limb Assessment (RULA), and Rapid Entire Body Assessment (REBA), are available for assessing exposure to risk factors associated with timber harvesting operations. Here, three ergonomic risk assessment methods were applied to examine ergonomic risk assessments in chainsaw felling and delimbing operations. Additionally, exposure to risk factors in each method was analyzed to propose an optimal working posture in felling and delimbing operations. The risk levels of these operations were evaluated to be highest in the RULA method, followed by the OWAS and REBA methods, and most of the exposed working postures were examined with a low-risk level of two and three without requiring any immediate working posture changes. However, two significant working postures, including the bending posture of the waist and leg in felling operation and standing posture on the fallen trees in delimbing operation, were assessed as the high-risk level and needed immediate working posture changes. Low-risk work levels were examined in the squatting posture for felling operation and the straightened posture of the waist and leg for delimbing operation. Moreover, the slope in felling operation and the tree height in delimbing operation significantly affected risk level assessment of working posture. Therefore, our study supports that felling and delimbing workers must operate with low-risk working postures for safety.

• Journal of Environmental Health Sciences
• /
• v.42 no.6
• /
• pp.353-364
• /
• 2016

Objectives: Determining the time activity patterns of urban populations is critical when performing an exposure assessment. The purposes of this study were to classify urban populations in Korea by their time activity patterns and to identify factors that influence these patterns. Methods: The time activity patterns of 31,634 and 20,263 individuals were obtained from two national databases collected in 2004 and 2009, respectively. The two largest metropolitan cities in Korea, Seoul and Busan, were selected for this analysis. For each city, multivariate linear regressions were performed to determine factors affecting the time spent in a residence and in transit. We also used cluster analysis to classify each urban population by activity pattern. Results: Nine distinctive activity patterns were identified in the Seoul and Busan populations, respectively, and the resulting classified population groups had specific characteristics. The identified patterns were similar for Seoul and Busan. The most significant factors affecting time spent in a residence were employment status, age, marriage status, education, and gender. Gender, education, employment status, and monthly income were significant factors affecting time spent in transit. Conclusion: These results indicate that, in addition to region, exposure scientists in Korea should consider classifying populations based on age, gender, and occupation.

• Proceedings of the Korean Society for Noise and Vibration Engineering Conference
• /
• 2012.04a
• /
• pp.178-185
• /
• 2012

In Korea, researches on the exposure assessment of the hand-transmitted vibration started from the mid-90, however, they were performed in the limited industries such as auto-assembly plants and the evaluation of the vibration was mostly conducted by ISO 5349(1986). Therefore, it was necessary to assess hand-transmitted vibration levels of workplace such as ship building/repairing industry or mining industry where occupational injuries are largely occurred and to evaluate the vibration levels using revised ISO 5349(2001). The SVAN 949 Four Channels Sound & Vibration Analyser was used for the measurement. The workers using a chain saw were exposed to $1.7{\sim}2.8m/s^2$ of daily vibration level. Workers using a rock drill in a coal mining were exposed to the highest vibration acceleration among workers and the levels were $7.1{\sim}10.8m/s^2$. Vibration levels of grinders were different according to the types of grinders. The hand-transmitted vibration of 3 types of grinders were measured and the levels were $3.3{\sim}11.1m/s^2$. Workers using a impact wrench were exposed to $1.5{\sim}1.6m/s^2$ of vibration. Out of 20 kinds of machines, only 4 tools provided the information of vibration acceleration on the instructions. In addition, the current condition of workplaces to control vibration was not much different from the past because there are no vibration exposure limit.

• Journal of Preventive Medicine and Public Health
• /
• v.33 no.2
• /
• pp.165-173
• /
• 2000

Objectives : To assess the availability of the glycophorin A (GPA) assay to detect the biological effect of ionizing radiation in workers exposed to low-doses of radiation. Methods : Information on confounding factors, such as age and cigarette smoking was obtained on 144 nuclear power plant workers and 32 hospital workers, by a self-administered questionnaire. Information on physical exposure levels was obtained from the registries of radiation exposure monitoring and control at each facility. The GPA mutant assay was performed using the BR6 method with modification by using a FACScan flow cytometer. Results : As confounders, age and cigarette smoking habits showed increasing trends with GPA variants, but these were of no statistical significance. Hospital workers showed a higher frequency of the GPA variant than nuclear power plant workers in terms of the NO variant. Significant dose-response relationships were obtained from in simple and multiple linear regression models. The slope of the regression equation for nuclear power plant workers was much smaller than that of hospital workers. These findings suggest that there may be apparent dose-rate effects. Conclusion : In population exposed to chronic low-dose radiation, the GPA assay has a potential to be used as an effective biologic marker for assessing the bone marrow cumulative exposure dose.

• Safety and Health at Work
• /
• v.3 no.1
• /
• pp.17-21
• /
• 2012

Objectives: Asbestos-related diseases (ARDs) have increased globally over the decades, causing an economic burden and increased health care costs. It is difficult to predict the risk of development of ARDs and of respiratory disability among workers with a history of asbestos exposure. Blood based biomarkers have been reported as promising tools for the early detection of malignant mesothelioma. This study investigated whether serum soluble mesothelin-related peptide (SMRP) would reflect severity of disablement in compensable ARDs. Methods: SMRP levels were measured in a cohort of 514 asbestos-exposed subjects. Severity of ARDs was assessed by a Medical Authority comprising four specially qualified respiratory physicians. Severity of ARDs and SMRP levels were compared. Results: Mean (standard deviation) serum SMRP level in the population with compensable ARDs (n = 150) was 0.95 (0.65) nmol/L, and was positively associated with disability assessment (p = 0.01). Mean SMRP level in healthy asbestos-exposed subjects was significantly lower than those with pleural plaques (p < 0.0001) and in subjects with ARDs who received compensation (p < 0.01). Conclusion: This study indicates that serum SMRP levels correlate with severity of compensable ARDs. Serum SMRP could potentially be applied to monitor progress of ARDs. Further prospective work is needed to confirm the relationship between SMRP and disability assessment in this population.

• Journal of the korean academy of Pediatric Dentistry
• /
• v.39 no.3
• /
• pp.267-272
• /
• 2012

Dental professionals are exposed to various occupational risks, among which the problem of hearing damage has been newly revealed. There have been some researches reporting that noise occurring in a dental office exceeds the Occupational Safety and Health Act (OSHA) Standards. Especially, the pediatric dentists are repeatedly exposed to an additional noise source called the crying sound of children in addition to all kinds of noises from dental instruments. Accordingly, this study intended to investigate the noise environment likely to affect pediatric dentists and to examine the possibility of resultant hearing damages. The level of noise was measured respectively, when various dental instruments (ultrasonic scaler, high-speed handpiece, low-speed handpiece) are operated, when children are crying, and when both occasions take place simultaneously (from the distance of 30 cm) with a portable noise meter. And the daily duration of pediatric dentists exposed to the noise environment was surveyed. The results were compared with the standard value of noise threshold of NIOSH, OSHA, and that of hearing damage of CRA News letter respectively. Considering the intensity and exposure time, the noise environment of pediatric dentists exceeds the allowable noise threshold values. Even only one exposure to crying child was likely to lead to permanent hearing damage. Comparatively, pediatric dentists have a higher risk for occupational hearing damages, and some active measures are thought highly desirable to minimize it.

• Journal of Korean Society of Occupational and Environmental Hygiene
• /
• v.11 no.1
• /
• pp.56-69
• /
• 2001

Objectives : This study was designed to develop and standardize a checklist for ergonomic risk factors, and to provide ergonomic guidelines for managing cumulative trauma disorders (CTDs) in automobile assembly lines. Methods : The Checklist for Ergonomic Risk Factors (CERF-1) was developed based on the results of previous studies, and then modified after performing pilot study. Information on the symptoms possibly related with CTDs was obtained using a self-reported Questionnaire from 465 automobile assembly workers. Their job conditions were examined to assess risk factors through both direct observation and video analysis. Results : Rate of detecting risky job through CERF-1 was 85.6%, and was similar to that (88.8%) by Occupational Safety and Health Adminstration(OSHA) checklist but higher than that (63.7%) by American National Standards Institute(ANSI) Z-365. Relationship of the exposure scores derived from CERF-1 with levels of symptom was greater (r=0.49) than OSHA (r=0.28) and ANSI Z-365 (r=0.22). Considering the relationship, jobs scoring higher than 16 could be classified as the Risk Job. and lower than 16 as the Low Risk Job. Sensitivity and specificity of the Risk Job were 92.5 % and 31.5 %, respectively. Odds ratio (OR) after age adjustment was 5.69 (95 % confidence interval 3.15-10.29) for the Risk Job, and these ORs were significantly different from those of the Low Risk Job. The exposure scores were Quite valid, in that the scores at the main survey were significantly correlated with those at the follow-up survey, as suggested by test-retest(r=0.88) and inter-rater reliability(r=0.80). Conclusions : The CERF-1, developed in this study, will be an efficient tool for evaluation of risk jobs for CTDs in automobile assembly lines, and can be used easily by health care providers.