• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 2003.10a
• /
• pp.16-16
• /
• 2003

In this study, for a safety assessment of wheelchair occupant in side impact, we used a dynamic sled impact test results. The test was carried out total 6 times and impact speed was 13g$\pm$0.43/28km/h$\pm$0.95, By using EURO SID-1 dummy, head performance criteria(HPC), abdominal peak force, etc. were measured. We evaluated wheelchair occupant safety by motion criteria(MC) which was measured by head, trunk and side deformation change of wheelchair and Head & Neck injury criteria(HNI) measured by using head and neck deformation angle and time relation. When we assumed that the maximum injury value in side impact was 100%, the results of motion criteria(MC) of wheelchair occupant were max 80.3, mim 32.3 and average 60.3%, Head & Neck injury criteria(HNI) value were max 118.4, min 14.5 and average 59.7%.

• Journal of the Korean Society for Precision Engineering
• /
• v.21 no.6
• /
• pp.179-187
• /
• 2004

In this study, for a safety assessment of wheelchair occupant in frontal and side impact of wheelchair loaded vehicle, a sled impact test was perfumed. Each test was carried out total 6 times, by using Hybrid III 50th-percentile male dummy in light weight and electric wheelchair. We estimate MC(Motion Criteria), CIC(Combined Injury Criteria), HIC(Head Injury Criteria), HNIC(Head and Neck Injury Criteria) based on measured data. Through this study, we make an assessment of risk analysis of wheelchair occupant and wheelchair. Through this study, safety standard of wheelchair is to be evaluated.

• Journal of Biomedical Engineering Research
• /
• v.24 no.1
• /
• pp.15-21
• /
• 2003

In this study, for a safetv assessment of light weight wheelchair occupant in frontal crash, we tested a dynamic sled impact test. we carried out total 6 times test and impact speed was 20g/48 km/h. By using Hybrid III 50%ile male dummy, head injury criteria(HIC), neck flexion moment, neck axial tension force, neck shear force. chest acceleration, head, wheelchair and knee excursion were measured, we evaluated light weight wheelchair occupant safety by motion criteria(MC) which proposed in SAE J2249 and combined injury criteria(CIC) which is a voluntary standard(GM-IARV) of General Motors Co.. when we assumed that the maximum injury value in frontal crash was 100%, the result of motion criteria(MC) of wheelchair occupant was 52%, occupant upper body injury index(CIC) was 60.1%.

• International Journal of Highway Engineering
• /
• v.10 no.1
• /
• pp.123-134
• /
• 2008

Since the end treatments of guardrails installed on domestic roads have the shapes which can easily penetrate and turnover a vehicle, the occupant can be subjected to severe injury when a vehicle impacts the end treatments. In this study, the criteria of performance evaluation for end treatments are suggested which are suitable to domestic road circumstances. Based on the investigation for the installation and studies instances of end treatments, the mechanism of end treatments is examined and the new end treatment suitable to domestic road circumstances is suggested. The suggested end treatment was verified by computer simulation using d LS-DYNA programs and satisfied the suggested performance evaluation criteria for end treatments. And the developed end treatment was verified by full-scale vehicle crash test and satisfied the following three primary appraisal factors of the suggested performance evaluation criteria for end treatments; occupant risk criteria, structural adequacy, and after-collision vehicle trajectory. This study is the first to develop end treatments considering the occupant safety in Korea. Therefore, If the developed end treatments is installed on roads and highways, it can be expected that it will reduce the grave situation of end treatment accidents and increase the safety of roads.

• Proceedings of the Computational Structural Engineering Institute Conference
• /
• 1994.04a
• /
• pp.191-198
• /
• 1994

The nonlinear dynamic behaviors of guardrail established on the local or high way have been investigated using BARRIER Ⅶ program with respect to four design variables such as section type of beams and posts, impact angle, impact velocity and vehicle weight. Computer simulation programs are sophisticated analytical models for analyzing dynamic vehicle/barrier interactions and provide a relatively inexpensive alternative to full scale crash testing. This study has been focused on the structural adequacy, occupant risk, and vehicle trajectory. For this purpose, the maximum deflection and impact force have been calculated to design the clear zone and to analyze effect of impact attenuation. Also, the acceleration of vehicle and exit angle after collision have been computed to estimate the occupant risk. From this study, it is suggested that we should strengthen the design criteria of guradrail to prevent from disastrous traffic accidents.

• Journal of the Korean Society of Manufacturing Process Engineers
• /
• v.15 no.1
• /
• pp.61-67
• /
• 2016

The airbag is a widely accepted device for occupant protection in the automotive industry. As the injuries induced by airbag deployment have become a critical issue, revisions to Federal Motor Vehicle Safety Standard (FMVSS) 208 were required to create advanced airbags that can protect occupants of varying statures. In this paper, we developed a new low-risk deployment passenger airbag by adding the Passenger Protection Wrap (PPW). The PPW reduces the cushion impact force to the occupant in order to ensure pressure dispersion. A series of tests were conducted by using FMVSS 208 test procedures to demonstrate the proposed system. It was found that the system not only satisfied the injury criteria of FMVSS 208 but was also effective for protecting passengers of all sizes (male, small female, 3-year-old, 6-year-old).

• Computational Structural Engineering
• /
• v.7 no.2
• /
• pp.89-99
• /
• 1994

The nonlinear dynamic behaviors of guardrail established on the local or high way have been investigated using BARRIER VII program with respect to four design variables such as section type of beams and posts, impact angle, impact velocity and vehicle weight. Computer simulation programs are sophisticated analytical models for analyzing dynamic vehicle/barrier interactions and provide a relatively inexpensive alternative to full scale crash testing. This study has been focused on the structural adequacy, occupant risk, and vehicle trajectory. For this purpose, the maximum defection and impact force have been calculated to design the clear zone and to analyze effect of impact attenuation. Also, the acceleration of vehicle and exit angle after collision have been computed to estimate the occupant risk. From this study, it is suggested that we should strengthen the design criteria of guardrail to prevent from disastrous traffic accidents.

• Journal of Korean Society for Atmospheric Environment
• /
• v.12 no.2
• /
• pp.151-157
• /
• 1996

Vehicle occupant exposure to volatile organic compounds (VOCs) continues to be the subject of active research because of higher levels of VOCs in vehicles than in the surrounding ambient atmosphere and because of potential health risk. This study identified in-auto and in-bus exposures to 6 selected aromatic VOCs during rush-hour driving. A bus service route was selected to include an urban route (Taegu) and a suburban route (Hayang-Up) to satisfy the specified criteria of this study. The most abundant VOC concentration measured in this study was toluene. In-vehicle target Voc concentrations of the urban route were significantly different from those of the suburban segment. On the sum of average of the target VOCs, in-auto VOC concentration was about 1.5 times higher than in-bus VOC concentration. Based on the sum of average, in-automobile target VOC concentrations of this study were within the range of previous studies conducted in several cities of the United States, while in-bus VOC concentrations of this study were much lower than those of Taipei in Taiwan. In-vehicle VOC concentrations of present study significantly varied with sampling days, while they did not varied with driving period.

• Fire Science and Engineering
• /
• v.30 no.3
• /
• pp.73-78
• /
• 2016

The Installation, Maintence, and Safety Control of Fire-fighting Systems Act of South Korea regulates that over 30-storey high-rise buildings including underground spaces should vitally perform the Performance-based Design to minimize property damage and personal injury as a fire risk assessment in advance. Therefore a PBD designer such as a fire safety professional engineer evaluate occupant's life safety by a scientific methodology. In order to evaluate the life safety, fire safety designers calculate the Required Safety Egress Time (RSET) which does not have the legal criteria regarding the standard method of calculation yet. So this way has been showing different results depending upon the designer's choice, knowledges and experiences. In this study, RSET calculation methods by six designers respectively were analysed from the thirteen reports of real performance based design projects conducted in Busan for a last five years. In particular, the Response Time calculation methods which have the most powerful effect for figuring the RSET are compared with the other designer's to deduce an error value.